• 한국응용과학기술학회지
• /
• 제41권2호
• /
• pp.219-232
• /
• 2024

이 연구는 성인 여성을 대상으로 체질량지수와 드러밍 운동이 자율신경계에 미치는 영향을 규명하는데 목적이 있다. 30-50대의 성인 여성10명을 체질량지수가 정상인 집단(Low BMI, LBMI <23kg/m²)과 과체중 이상인 집단(High BMI, HBMI>23kg/m²)으로 나누어 드러밍 운동을 실시하였다. 드러밍 운동은 1회 50분, 주 3회, 8주간 실시하였으며, 운동 전후 신체조성과 심박변이도를 측정하였다. 심박변이도는 선형분석인 시간 영역 분석과 주파수 영역 분석을 통해 SDNN(Standard Deviation of NN interval), RMSSD(Root Mean Square of the Successive Differences), HF(High Frequency), LF(Low Frequency), TP(Total Power)를 측정하였다. 비선형분석인 푸앵카레 플롯(Poincaré plot)을 통해 SD1(Standard Deviation of the distance of each point from the y = x axis), SD2(Standard Deviation of each point from the y = x + average R-R interval), SD2/SD1을 측정하였다. 자율신경계 지수로 부교감신경계지수(Parasympathetic Nervous System Index; PNS Index)와 교감신경계지수(Sympathetic Nervous System; SNS Index)를 측정하였다. 연구 결과, 운동 전 심박변이도에서 HBMI 집단과 LBMI 집단 간에는 유의한 차이가 나타나지 않았다. 그러나, 8주간의 드러밍 운동 후에는 HBMI 집단이 LBMI 집단에 비해 체중(p=0.034), 체질량지수(p=0.044), 체지방량(p=0.032), 허리둘레(p=0.013)에서 유의한 상호작용 효과가 나타났다. 심박변이도에서 HBMI 집단은 LBMI 집단에 비해 선형 분석에서 RMSSD(p=0.018)와 TP(p=0.033), 비선형분석에서는 SD1(p=0.018), 자율신경계지수에서는 PNS Index(p=0.040)가 유의하게 증가하였다. RMSSD, SD1 및 PNS Index는 부교감신경계의 활동을 나타내는 지표이다. 결론적으로 8주간의 드러밍 운동이 과체중 이상 여성의 자율신경계 중 부교감신경계의 개선에 긍정적인 효과를 미치는 것으로 확인되었다.

• Imaging Science in Dentistry
• /
• 제45권1호
• /
• pp.41-47
• /
• 2015

Purpose: This study was performed to evaluate the linear distance accuracy and reliability of stitched small field of view (FOV) cone-beam computed tomography (CBCT) reconstructed images for the fabrication of implant surgical guides. Material and Methods: Three gutta percha points were fixed on the inferior border of a cadaveric mandible to serve as control reference points. Ten additional gutta percha points, representing fiduciary markers, were scattered on the buccal and lingual cortices at the level of the proposed complete denture flange. A digital caliper was used to measure the distance between the reference points and fiduciary markers, which represented the anatomic linear dimension. The mandible was scanned using small FOV CBCT, and the images were then reconstructed and stitched using the manufacturer's imaging software. The same measurements were then taken with the CBCT software. Results: The anatomic linear dimension measurements and stitched small FOV CBCT measurements were statistically evaluated for linear accuracy. The mean difference between the anatomic linear dimension measurements and the stitched small FOV CBCT measurements was found to be 0.34 mm with a 95% confidence interval of +0.24 - +0.44 mm and a mean standard deviation of 0.30 mm. The difference between the control and the stitched small FOV CBCT measurements was insignificant within the parameters defined by this study. Conclusion: The proven accuracy of stitched small FOV CBCT data sets may allow image-guided fabrication of implant surgical stents from such data sets.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.1-8
• /
• 2019

본 논문에서는 18650 원통형 NCA 리튬이온 배터리로 구성된 고출력 직렬 배터리로 다양한 C-rate의 전기적 특성을 테스트한다. 테스트를 통해 추출한 14S1P 배터리 팩의 방전 용량 데이터와 4S1P 배터리 팩의 EV cycle 데이터를 통해 C-rate의 변화에 따른 전기적 특성을 분석한다. 분석을 통해 얻은 데이터를 기반으로 C-rate에 따른 방전용량 실험의 셀 간 전압 편차와 EV cycle 실험의 셀 간 전압 편차를 다중선형회귀 모델로 추정하여 선형적인 특징을 가진 데이터와 비선형적인 특징을 가진 데이터에 대한 각각의 추정성능을 검증한다. 모델의 추정성능을 검증하기 위해 추정 데이터와 실제 데이터의 RMSE를 구해 알고리즘의 정확성을 평가한다. 논문의 결과는 14S1P 배터리 팩의 방전 용량의 셀 간 전압 불균형과 4S1P 배터리 팩의 EV cycle의 셀 간 전압 불균형 중 선형적인 데이터인 방전 용량의 셀 간 불균형 데이터의 추정 성능이 더 뛰어난 것을 검증하는데 기여한다.

• Journal of Photoscience
• /
• 제11권1호
• /
• pp.11-17
• /
• 2004

Fluorescence quenching of l,4-bis [2-(2-methylphenyl) ethenyl]-benzene (Bis-MSB) by carbon tetrachloride in five different solvents namely hexane, cyclohexane, toluene, benzene and dioxane has been carried out at room temperature with a view to understand the quenching mechanisms. The Stern-Volmer plot has been found to be non-linear with a positive deviation for all the solvents studied. In order to interpret these results we have invoked the Ground state complex and Sphere of action static quenching models. Using these models various rate parameters have been determined. The magnitudes of these parameters imply that sphere of action static quenching model agrees well with the experimental results. Hence the positive deviation in the Stem-Volmer plots is attributed to the static and dynamic quenching. Further, with the use of Finite Sink approximation model, it was possible to check whether these bimolecular reactions as diffusion limited and to estimate independently distance parameter R' and mutual diffusion coefficient D. Finally an effort has been made to correlate the values of R'and D with the values of the encounter distance R and the mutual diffusion coefficient D determined using the Edwardis empirical relation and Stokes-Einstein relation.

• International Journal of Control, Automation, and Systems
• /
• 제6권6호
• /
• pp.818-827
• /
• 2008

In this paper, we propose a new noise estimation and reduction algorithm for stationary and nonstationary noisy environments. This approach uses an algorithm that classifies the speech and noise signal contributions in time-frequency bins. It relies on the ratio of the normalized standard deviation of the noisy power spectrum in time-frequency bins to its average. If the ratio is greater than an adaptive estimator, speech is considered to be present. The propose method uses an auto control parameter for an adaptive estimator to work well in highly nonstationary noisy environments. The auto control parameter is controlled by a linear function using a posteriori signal to noise ratio(SNR) according to the increase or the decrease of the noise level. The estimated clean speech power spectrum is obtained by a modified gain function and the updated noisy power spectrum of the time-frequency bin. This new algorithm has the advantages of much more simplicity and light computational load for estimating the stationary and nonstationary noise environments. The proposed algorithm is superior to conventional methods. To evaluate the algorithm's performance, we test it using the NOIZEUS database, and use the segment signal-to-noise ratio(SNR) and ITU-T P.835 as evaluation criteria.

• 한국기계가공학회지
• /
• 제15권1호
• /
• pp.14-19
• /
• 2016

Transmission error (TE) is the most important cause of gear noise and vibration because TEs affect the changes of the force and the speed of gears. TE is usually expressed as an angular deviation, or a linear deviation measured at the pitch point and calculated at successive positions of the pinion as it goes through the meshing cycle. Accurate measurement of TE for gear transmission will provide a reasonable basis for gear design, manufacturing processes and quality control. Therefore, in order to study the accuracy of the gear transmission, stability, TE, vibration and noise after gear micro-geometry modification, a gear transmission test rig is proposed in this paper, which is based on the existing technical conditions, by using reasonable testing methods, hardware and a signal processing method. All of the details and the experience can be taken into consideration in the next upgraded test rig.

• 대한산업공학회지
• /
• 제30권3호
• /
• pp.205-212
• /
• 2004

This paper proposes the variables repetitive group sampling plan where the quality characteristic following normal distribution has upper or lower specification limit. The problem is formulated as a non-linear programming problem where the objective function to minimize is the average sample number and the constraints are related to lot acceptance probabilities at acceptable quality level (AQL) and limiting quality level (LQL) under the operating characteristic curve. Sampling plan tables are constructed for the selection of parameters indexed by AQL and LQL in the cases of known standard deviation and unknown standard deviation. It is shown that the proposed sampling plan significantly reduces the average sample number as compared with the single or the double sampling plan.

• Wind and Structures
• /
• 제24권1호
• /
• pp.79-93
• /
• 2017

Wind-induced fluctuating internal pressures in a building with a dominant opening can be described by a second-order non-linear differential equation. However, the accuracy and efficiency of the governing equation in predicting internal pressure fluctuations depend upon two ill-defined parameters: inertial coefficient $C_I$ and loss coefficient $C_L$, since $C_I$ determines the un-damped oscillation frequency of an air slug at the opening, while $C_L$ controls the decay ratio of the fluctuating internal pressure. This study particularly focused on the value of loss coefficient and its influence factors including: opening configuration and location, internal volumes, as well as wind speed and approaching flow turbulence. A simplified formula was presented to predict loss coefficient, therefore an approximate relationship between the standard deviation of internal and external pressures can be estimated using Vickery's approach. The study shows that the loss coefficient governs the peak response of the internal pressure spectrum which, in turn, will directly influence the standard deviation of the fluctuating internal pressure. The approaching flow characteristic and opening location have a remarkable effect on the parameter $C_L$.

• 한국지능시스템학회논문지
• /
• 제9권6호
• /
• pp.598-604
• /
• 1999

본 논문에서는 능동형자기베어링(Active Magnetic Bearing AMB)시스템의 제어를 위한 새로운 퍼지제어 알고리즘을 제안한다. 이 방법은 AMB 시스템의 비선형 특성을 효과적으로 다루기 위하여 Joh등[4,5]이 제안한 LMI에 근거한 PDC 알고리즘과 퍼지 싱글톤을 사용하는 Mamdani형의 퍼지제어기를 복합한다. 이들은 각각 fine mode control과 coarse mode control이라고 구분하였다. coarse mode control은 회전축의 위치에러가 큰 경우 빠른 중심복귀 응답특성을 보이며 fine mode control은 회전축의 위치에러가 작을 때 요구되는 과도응답특성을 제공한다. 본 논에서 제안된 방법은 그성능을 입증하기 위하여 AMB 시스템의 제어에 적용되었으며 선형제어기와 일반적인 PDC 알고리즘으로 제어된 결과와의 비교를 통해 제안된 방법의 우수성을 보인다.

• 수산해양기술연구
• /
• 제53권4호
• /
• pp.337-348
• /
• 2017

The tension of warp from trawler and sea-floor contact can generate tilt and wake turbulence around otter boards. Preliminary measurements of otter board tilt and 3-D flow velocity during bottom trawl operations were taken using a vector instrument to investigate the effects of wake turbulence at the trailing edge of the otter board. Tilt data (i.e., yaw, pitch, and roll) at 1 Hz and flow data (velocities in the towing, lateral, and vertical directions) at 16 Hz were analyzed to determine their periods and amplitudes using global wavelet and peak event analyses. The mean period (${\pm}standard$ deviation) of the tilt from the peak event analysis ($5{\pm}2s$) was longer or double than that of flow velocity ($3{\pm}2s$). The two periods also had a significant linear relationship. The turbulence rate of flow was 30-50% at the trailing edge and was closely related to roll deviation. The frequency of phase difference ratios (i.e., peak time differences between tilts and flow periods) was significantly different from random occurrence in two trials, possibly due to side tidal effects. However, in the other trials, flow peaks were random, as shown by the even peak times between tilts and flows. Future studies should focus on reducing tilt variation, wake turbulence, and bottom contact to stabilize otter board motion.