• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.156-163
• /
• 2014

In this paper, a phase control system has been implemented to improve the dynamic performance of the stroke response for linear compressors. In order to control the cooling capability of a refrigerator or an air conditioner in which liner compressors are applied, the piston speed should be controlled. The piston speed control can be obtained by adjusting the frequency or the stroke of linear motors. The dynamic performance of linear compressors depends on how accurately the stroke or the piston amplitude is estimated. A phase control system is added to the stroke control loop and the superior performance of the phase control system is verified via some simulation studies.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.881-882
• /
• 2006

선형전동기(linear motor)는 일반 회전형 모터에 비해 직선 구동력을 직접 발생시키는 특유의 장점이 있으므로 직선 구동력이 필요한 시스템에서 회전형에 비해 절대적으로 우세하다. 선형전동기의 성능인 추력을 스테이터, 코어, 영구자석 등의 구성요소의 형상과 치수, 코어와 영구자석의 극간격, 공극, 코일의 권수에 따라서 결정된다. 본 논문에서 제안한 2kW급 단상 구동형 횡자속 선형전동기는 압축기 제작에 필요한 직경 50mm, 구동 스트로크 18mm로 설계하였다. 또한 pole pitch가 20mm로 설계하였으며 요구되는 평균추력은 940N이다. 제작된 압축기의 특징은 고정자와 이동자가 맞닿는 flux path를 넓히기 위해서 최대한 경사진 각도의 형상으로 제작하였으며 경사의 각도가 커지면 커질수록 압축기로 구동하는 이동자와 고정된 부위사이에서 발생하는 흡인력이 상쇄되는 구조이기 때문에 진동의 원인으로 가장 크게 작용한다는 디텐트력이 작다는 것이 특징이며, 진동특성 등에 유리한 것으로 판단된다.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.147-149
• /
• 2005

On this study, we optimized maximizing thrust force of weight ratio and minimizing detent force of weight ratio at the TFLM(Transverse Flux Linear Motor) using design of experiments by the table of orthogonal array, characteristic function and analysis of means(ANOM), For two functions or more, the effectiveness of design change can be evaluated in accordance with change in design parameters. Also, The stator and mover weight of TFLM is reduced by up to 20 percent while its thrust force of weight ratio and detent force of weight improved. From now on, we are going to apply the required technique to design various uses and shares of the TFLM.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.4
• /
• pp.520-530
• /
• 1996

In this study, the artificial defects in rotary compressor are classified using pattern recognition of acoustic emission signal. For this purpose the computer program is developed. The neural network classifier is compared with the statistical classifier such as the linear discriminant function classifier and empirical Bayesian classifier. It is concluded that the former is better. It is possible to acquire the recognition rate of above 99% by neural network classifier.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.63-66
• /
• 2002

A free piston and free displacer (FPFD) Stilting cryocooler for the cooling infrared and cryo-sensor is currently under development at Korea Institute of Machinery & Materials. In this study, the dynamic characteristics of the displacer in the expansion space of the Stirling cooler was investigated by experiment. The experimental results show that the Stirling cryocooler has maximum cooling capacity at the certain relation between operating frequency and natural frequency of the displacer and the operating frequency of the Stirling crycooler should be determined by natural frequency of the linear compressor and displacer.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.11
• /
• pp.31-36
• /
• 2002

극저온 냉동기 시장은 군수시장이 대부분이며 민수시장은 현재까지는 여러 분야에 응용되기 시작하는 시장 형성기에 있다. 그러나 향후 초전도시장과 더불어 성장이 기대되는 시장이다. 국내는 기술 개발면에서 많은 발전을 하고 있지만 아직도 외국에 비하여 뒤떨어진 실정이며 특히 극저온 냉동기의 제조 공정과 경제성 면에서의 기술발전은 본사를 제외하고서는 전무한 실정이다. 생산기술의 면에서의 연구 부족은 제한된 시장과 많은 기술장벽과 단시간의 개발기간 등에 주원인이 있다고 하겠다. 이러한 공정기술 낙후성은 가격경쟁력에서 뚜렷이 나타날 수밖에 없으며 이를 극복하기 위해서는 지속적인 개발과 체계적 지원이 뒤따라야 한다. 극저온냉동기의 국산화를 위해서는 원천기술 개발뿐만 아니라 공정 및 생산기술 개발 또한 절실히 필요하다. 따라서 많은 관계 연구자들의 연구와 관심이 뒤따라야 한다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1177-1178
• /
• 2011

본 논문은 선형 압축기 구동용 시스템의 손실 저감을 위한 공진형 인버터의 설계에 대하여 연구 하였다. 공진형 인버터 손실 저감을 위해 선형 액츄에이터의 등가모델 파라메타를 유한요소해석으로 제시하고, 비선형 특성을 고려한 직렬 공진형 인버터의 손실을 추정하였다.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.159-162
• /
• 2001

A Stirling cryocooler is relatively compact, reliable, commercially available, and uses helium as a working fluid. The FPFD stirling cryocooler consists of two compressor pistons driven by linear motors which makes pressure waves and a pneumatically driven displacer piston with regenerator. It is the most suitable design for a mechanical cryocooler utilized in night vision environment. In order to get optimum operating frequency, natural frequency of piston and displacer, optimum phase angle between piston and displacer, cooling capacity, performance tests of the Stirling cryocooler by the frequency characteristics were performed.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2162-2167
• /
• 2003

It is well-known that high anisotropic characteristic of turbulent flow field is dominant inside tip leakage vortex. This anisotropic nature of turbulence invalidates the use of the conventional isotropic eddy viscosity turbulence model based on the Boussinesq assumption. In this study, to check whether an anisotropic turbulence model is superior to the isotropic ones or not, the results obtained from steady-state Reynolds averaged Navier-Stokes simulations based on the RNG ${\kappa}-{\varepsilon}$ and the Reynolds stress model in two test cases, such as a linear compressor cascade and a forward-swept axial-flow fan, are compared with experimental data. Through the comparative study of turbulence models, it is clearly shown that the Reynolds stress model, which can express the production term and body-force term induced by system rotation without any modeling, should be used to predict the complex tip leakage flow, including the locus of tip leakage vortex center, quantitatively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.3
• /
• pp.159-165
• /
• 2008

This paper deals with the optimum high pressure control algorithm for a transcritical $CO_2$ mobile air-conditioning system with belt-driven compressor to achieve the maximum COP. The experiments were performed to find out the maximum COP conditions with various operating conditions. The experimental results showed that the COP was increased and then decreased with increase of the refrigerant high pressure for the system. Therefore the value of high pressure which has maximum COP could be selected. Furthermore, the strong (linear) relation between the optimum high pressure and the gas cooler outlet temperature was revealed, which suggests the use of a simple controller with only one parameter for the transcritical $CO_2$ cycle.