• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.325-342
• /
• 1998

Two RADARSAT SAR images with different modes acquired by Canadian Space Agency to test the effectiveness of geological lineament extraction and spring water detection over the Cheju Island. Geological lineaments are poorly developed this basalt dominant volcanic island, but more linear features can be extracted when SAR and TM images are simultaneously analyzed than when TM image alone is used. This results mainly owe to the facts that RADARSAT SAR systems are able to provide data with different frequencies, azimuth, and incidence angles. Distribution of spring water along coast is poorly correlated with geological lineaments or drainage pattern, but those in middle range of mountain region are developed along geological lineaments. Detection of spring water using remotely sensed images are turned out to be very difficult to achieve. Radial shaped sea surface temperature anomaly derived from TM thermal band should be the best candidate for spring water, but the resolution is not high enough. We also investigate the normalized radar cross section (or sigma naught) converted from RADARSAT and ERS-1 SAR data but to discriminate the spring water effectively except where relatively large water mass is observed on land side. Speckle noise and irregularity in physical sea surface condition are the serious obstacles for this application. ERS-1 SAR image acquired in low incidence angle was more useful for geological lineament estimation and water body study than RADARSAT SAR images with high incidence angles. Therefore the selection of incidence angle is critical in geological and spring water applications of SAR images, and low incidence angles less than about 30$^{\circ}$ are recommended to monitor the Cheju volcanic island.

• Korean Journal of Remote Sensing
• /
• v.15 no.2
• /
• pp.147-158
• /
• 1999

Remote sensing technique has offered better understanding of our environment for the decades by providing useful level of information on the landcover. In many applications using the remotely sensed data, digital image processing methodology has been usefully employed to characterize the features in the data and develop the models. Random field models, especially Markov Random Field (MRF) models exploiting spatial relationships, are successfully utilized in many problems such as texture modeling, region labeling and so on. Usually, remotely sensed imagery are very large in nature and the data increase greatly in the problem requiring temporal data over time period. The time required to process increasing larger images is not linear. In this study, the methodology to reduce the computational cost is investigated in the utilization of the Markov Random Field. For this, multiresolution framework is explored which provides convenient and efficient structures for the transition between the local and global features. The computational requirements for parameter estimation of the MRF model also become excessive as image size increases. A Bayesian approach is investigated as an alternative estimation method to reduce the computational burden in estimation of the parameters of large images.

• Health Policy and Management
• /
• v.29 no.3
• /
• pp.303-311
• /
• 2019

Background: Cerebrovascular disease is included in four major diseases and is a disease that has high rates of prevalence and mortality around the world. Moreover, it is a disease that requires a high cost for long-term hospitalization and treatment. This study aims to figure out the correlation between grip strength, which was presented as a simple, cost-effective, and relevant predictor of cerebrovascular disease, and cerebrovascular disease based on the results of a prior study. And furthermore, our study compared model suitability of the model to measuring grip strength and relative grip strength as a predictor of cerebrovascular disease to improve the quality of cerebrovascular disease's predictor. Methods: This study conducted an analysis based on the generalized linear mixed model using the data from the Korea Longitudinal Study of Ageing from 2006 to 2016. The research subjects consisted of 9,132 middle old age people aged 45 years or older at baseline with no missing information of education level, gender, marital status, residential region, type of national health insurance, self-related health, smoking status, alcohol use, and economic activity. The grip strength was calculated the average which measured 4 times (both hands twice), and the relative grip force was divided by the body mass index as a variable considering the anthropometric figure that affects the cerebrovascular disease and the grip strength. Cerebrovascular diseases, a dependent variable, were investigated based on experiences diagnosed by doctors. Results: An analysis of the association between grip strength and found that about 0.972 (odds ratio [OR], 0.972; 95% confidence interval [CI], 0.963-0.981) was the incidence of cerebral vascular disease as grip strength increased by one unit increase and the association between relative grip strength and cerebrovascular disease found that about 0.418 (OR, 0.418; 95% CI, 0.342-0.511) was the incidence of cerebral vascular disease as relative grip strength increased by unit. In addition, the model suitability of the model for each grip strength and relative grip strength was 11,193 and 11,156, which means relative grip strength is the better application to the predictor of cerebrovascular diseases, irrespective of other variables. Conclusion: The results of this study need to be carefully examined and validated in applying relative grip strength to improve the quality of predictors of cerebrovascular diseases affecting high mortality and prevalence.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.271-278
• /
• 2021

According to the capacity design of eccentrically braced frames (EBFs), non-dissipative members such as columns, link-exterior beams, and braces must remain within the elastic region when a fully-yielded and strain-hardened link transmits force to them. The current AISC 341 standard suggests a strain-hardening factor (SHF) of 1.25 for a link under capacity design, regardless of its properties. However, all the links in an EBF are not likely to yield simultaneously to the extent to which the overstrength corresponding to 1.25 times their expected strength is attained, especially for high-rise buildings. Considering this phenomenon, a technique to predict the SHF of links at the limit state of the structure is proposed in this paper. The exact prediction of the links' SHF could save structural quantities dramatically while achieving the principle of capacity design. To validate the effectiveness of this technique, SHF values predicted by conducting linear analysis were compared with those evaluated by nonlinear analysis. Furthermore, the maximum demand-to-capacity ratios of the non-dissipative members were calculated to verify whether they would remain elastic at the limit state of the structure. Consequently, EBFs designed by the proposed method showed substantially economical quantities through the exact prediction of the SHFs, and the intention of capacity design was successfully achieved.

• Journal of Life Science
• /
• v.31 no.10
• /
• pp.922-928
• /
• 2021

To profile the microbial compositions of Korean traditional fermented paste made from whole soybeans, Doenjang and Cheonggukjang, and compare their taxonomic differences, we analyzed the V3-V4 region of 16S rRNA of naturally fermented foods by using next generation sequencing. α-Diversity results showed that values indicating bacterial community abundances (OTUs) and richness (ACE, Chao1) were statistically significant (p=0.0001) in Doenjang and Cheonggukjang. Firmicutes was the most common phylum in both groups, representing 97.02% and 99.67% in the Doenjang and Cheonggukjang groups, respectively. Bacillus was the most dominant genus, accounting for 71.70% and 59.87% in both groups. Linear discriminant (LDA) effect size (LEfSe) analysis was performed to reveal the significant ranking of abundant taxa in different fermented foods. A size-effect threshold of 2.0 on the logarithmic LDA score was used for discriminative functional biomarkers. On the species level, Bacillus subtilis, Tetragenococcus halophilus, and Clostridium arbusti were significantly more abundant in Doenjang than in Cheonggukjang, whereas Bacillus thermoamylovorans, Enterococcus faecium, and Lactobacillus sakei were significantly more abundant in Cheonggukjang than in Doenjang. Permutational multivariate analysis of variance (PERMANOVA) showed that the statistical difference in microbial clusters between the two groups was significant at the confidence level of p=0.001. This research could be used as basic research to identify the correlation between the biochemical characteristics of Korean fermented foods and the distribution of microbial communities.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.12-28
• /
• 2019

Road geometry is one of the many factors that cause crashes, but the effect on traffic accident depends on weather conditions even under the same road geometry. This study identifies the variables affecting the crash severity by matching the highway accident data and weather data for 14 years from 2001 to 2014. A hierarchical ordered Logit model is used to reflect the effects of road geometry and weather condition interactions on crash severity, as well as the correlation between individual crashes in a region. Among the hierarchical models, we apply a random intercept model including interaction variables between road geometry and weather condition and a random coefficient model including regional weather characteristics as upper-level variables. As a result, it is confirmed that the effects of toll, ramp, downhill slope of 3% or more, and concrete barrier on the crash severity vary depending on weather conditions. It also shows that the combined effects of road geometry and weather conditions may not be linear depending on rainfall or snowfall levels. Finally, we suggest safety improvement measures based on the results of this study, which are expected to reduce the severity of traffic accidents in the future.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.1
• /
• pp.57-63
• /
• 2019

Hypertension is caused by a combination of genetic and environmental factors. In advanced countries, more than 30% of adults have hypertension. Among the genetic factors affecting hypertension, there are reports from European cohort studies that variants of the MACROD2 gene are correlated with blood pressure and the hypertension status. In this study, genetic polymorphisms of the MACROD2 gene region were selected and extracted based on Korean Genome and Epidemiology data, and logistic regression analysis was then performed for the hypertensive state. Linear regression analysis was also performed for the systolic and diastolic blood pressure. As a result, 16 SNPs showed a statistically significant association with a hypertensive state, and 2 SNPs (rs16996211, rs6034240) showed statistical significance, even in blood pressure. The most significant rs16996211 had a relative risk of hypertension of 0.85 (CI: 0.76~0.95, $P=3.1{\times}10^{-3}$), as well as an association with the systolic blood pressure (beta=-0.75, P=0.024) and diastolic blood pressure (beta=-0.59, P=0.01). These results suggest that polymorphisms of the MACROD2 gene are associated with hypertension in both Caucasians and Koreans, and highlight the potential genetic correlations with the pathogenesis of hypertension.

• Journal of Korean Neurosurgical Society
• /
• v.65 no.1
• /
• pp.74-83
• /
• 2022

Objective : Oblique lumbar interbody fusion (OLIF) is a surgical technique that utilizes a large interbody cage to indirectly decompress neural elements. The position of the cage relative to the vertebral body could affect the degree of foraminal decompression. Previous studies determined the position of the cage using plain radiographs, with conflicting results regarding the influence of the position of the cage to the degree of neural foramen decompression. Because of the cage obliquity, computed tomography (CT) has better accuracy than plain radiograph for the measurement of the obliquely inserted cage. The objective of this study is to find the correlation between the position of the OLIF cage with the degree of indirect decompression of foraminal stenosis using CT and magnetic resonance imaging (MRI). Methods : We review imaging of 46 patients who underwent OLIF from L2-L5 for 68 levels. Segmental lordosis (SL) was measured in a plain radiograph. The positions of the cage were measured in CT. Spinal canal cross-sectional area (SCSA), and foraminal crosssectional area (FSCA) measurements using MRI were taken into consideration. Results : Patients' mean age was 69.7 years. SL increases 3.0±5.1 degrees. Significant increases in SCSA (33.3%), FCSA (43.7% on the left and 45.0% on the right foramen) were found (p<0.001). Multiple linear regression analysis shows putting the cage in the more posterior position correlated with more increase of FSCA and decreases SL correction. The position of the cage does not affect the degree of the central spinal canal decompression. Obliquity of the cage does not result in different degrees of foraminal decompression between right and left side neural foramen. Conclusion : Cage position near the posterior part of the vertebral body increases the decompression effect of the neural foramen while putting the cage in the more anterior position correlated with increases SL.

• Journal of Korea Foundry Society
• /
• v.41 no.6
• /
• pp.535-542
• /
• 2021

In this study, to improve the interfacial bond strength of cast iron-aluminum dissimilar materials, graphite was removed to a certain depth from the cast iron surface through de-graphitization heat treatment. As the heat treatment time increased, the depth at which graphite was removed increased, showing a linear relationship between the heat treatment time and depth. Aluminum was filled to a certain depth on the de-graphitized cast iron surface through die-casting method, and no intermetallic compounds were formed on the cast iron-aluminum interface. The interfacial bonding strength showed a value of 90 MPa regardless of the heat treatment time, which is very high compared to the 12MPa bonding strength of the material without de-graphitization heat treatment. This result is thought to be due to the mechanical bonding of the undercut structure as the liquid aluminum, penetrated by the high pressure die-casting process, solidified in the de-graphitized region of the cast iron.

• Journal of Life Science
• /
• v.32 no.10
• /
• pp.803-811
• /
• 2022

Despite the importance of traditional Korean fermented foods, little is known about the microbial communities and diversity of fermented soy products. To gain insight into the unexplored microbial communities of both Doenjang (DJ) and Ganjang (GJ) that may contribute to the fermentation in Korean traditional foods, we carried out next-generation sequencing (NGS) based on the V3-V4 region of 16S rDNA gene analysis. The alpha diversity analysis results revealed that both the Shannon and Simpson diversity indices were significantly different between the two groups, whereas the richness indices, including ACE, CHAO, and Jackknife, were not significant. Firmicutes were the most dominant phylum in both groups, but several taxa were found to be more abundant in DJ than in GJ. The proportions of Bacillus, Kroppenstedtia, Clostridium, and Pseudomonas and most halophiles and halotolerant bacteria, such as Tetragenococcus, Chromohalobacter, Lentibacillus, and Psychrobacter, were lower in DJ than in GJ. Linear discriminant effect size (LEfSe) analysis was carried out to discover discriminative functional biomarkers. Biomarker discovery results showed that Bacillus and Tetragenococcus were identified as the most important features for the classification of subjects to DJ and GJ. Paired-permutational multivariate analysis of variance (PERMANOVA) further revealed that the bacterial community structure between the two groups was statistically different (p=0.001).