• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.82-84
• /
• 1998

LDM(Linear DC Motor) are used in high speed, high-precision position control system. Because of these advatages, LDM has already used in the motor of pen-recorder, magnetic-disk devices. Under the limited dimension, we propose the design method of LDM by magnetic circuit. In this paper, a relation between the thrust constant and size of a LDM that is moving coil type with unipolar is described, which is defined as a simple relational equation. To maximize the rate of thrust to the volume of LDM, the magnetic flux density in the yoke is adjusted to the value of magnetic equation By the magnetic field analysis(FEM), the validity of the equation is confirmed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.197-199
• /
• 2006

This paper presents a analytical field solutions for the general class of Linear Brushless DC(LBLDC) motors with PM mover and 3-phase winding stator. In our magnetic field analysis, we have adopted an approach which can treat both magnetized material and winding from the each field analysis by magnetic vector potential considering 2-Dimensional slot modeling. Therefore, we give accurate analytical formulas and object function for design and parameters estimation by its magnetic field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.555-558
• /
• 1991

The IESF(Integral Error and State Feedback) controller, which incorporates state feedback as a modern control scheme and integral action as a classical control scheme, has better performance than that of the conventional PID controller in linear time-invariant systems. The IESF controller requires the measurement of all the state variables. But, unfortunately, it may be difficult or impossible to measure all state variables in many applications. And the IESF controller is applicable only to pole-assignable linear time-invariant system without time delay. In this paper, new IESF controller structure was proposed which performs feedback with only measurable state variables. In order to estimate the unmeasurable state variables. It was adopted the filter mode by full-order obserber. The good performance and effectiveness of the proposed controller was confirmed by computer simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.482-484
• /
• 1994

In this paper, to realize high speed position control of LDM (Linear DC Motor), the minimum time control method is applied. But, In this control method, calculation of non-linear function is required Therefore, in order to avoid this complex calculation, optimum switching of the Bang-Bang control is done on parabola type switching function established in the plane of phase. But, the sliding mode is occurred due to the modeling error of LDM and the variation of parameters. Thereby, the optimum 'control is not realized. In order to realize optimum control, the algorithm to modify switching function is proposed

• 전자공학회논문지S
• /
• 제35S권1호
• /
• pp.68-79
• /
• 1998

In this paper, we propose a model-based FDI(fault detetion and isolation) algorithm to detect and isolate fault in a linear system. The proposed algorithm is gased on an HFC(hydrid fault classifier) which consists of an FCART2(fault classifier by ART2 neural network) and an FCFM(fault classifier by fault models) which operate in parallel to isolate faults. The proposed algorithm is functionally composed of three main parts-parameter estimation, fault detection, and isolation. When a change in the system occurs, the estimated parameters go through a transition zone in which errors between the system output and the stimated output and the estimated output cross a predetermined thrseshold, and in this zone the estimated parameters are tranferred to the FCART2 for fault isolation. On the other hand, once a fault in the system is detected, the FCFM statistically isolates the fault by using the error between ach fault model out put and the system output. From the computer simulation resutls, it is verified that the proposed model-based FDI algorithm can be performed successfully to detect and isolate faults in a position control system of a DC motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.843-845
• /
• 2000

Many linear motion devices in industry require a limited movement in which the moving member oscillates. Such motion is often governed by a prescribed distance-time relationship.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.135-137
• /
• 2005

In servo system demanding precision dynamic characteristics, application of the Permanent Magnet Linear Synchronous Machines (PMLSM) has advantage of analysis convenience by simple geometry and thrust ripple reduction from the sinusoidal back electromotive force and excited stator. Therefore, this paper presents design of surface-mounted PMLSM with slotless iron cored stator according to coil turns to satisfy the rate thrust. Also, from dynamic analysis for servo application of manufactured motor with heavy mass, we offer accurate range of the DC link voltage and acceleration in rate speed. This is applied to speed reference profile considering system characteristics in total length of moving position.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.959-962
• /
• 2005

서보 모터는 컴퓨터와 센서로부터 오는 지령에 대해 높은 위치 정밀도와 정확한 속도제어가 가능해 자동화 시스템에서 중요한 부분으로 사용된다. 본 논문에서는 선형추진 BLDC모터로부터 얻어지는 파라메터를 추정하여 정현여자에 의해 구동되는 방식을 제안했다. 파라미터 추정은 제어기의 게인 튜닝과 외란 관측기를 통해 이루어졌다. 이러한 것을 가능하게 하기 위해 DSP(TMS320F240)를 사용하여 시스템을 구성 하였으며 FOC(Field Oriented Control)방식을 적용하였다. 본 시스템에 사용 된 TMS320F240은 A/D Converter와 PWM 발생부, 다수의 IO Port를 내장하고 있어 서보모터 제어에 유용하게 사용될 수 있는 프로세서이다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제15권1호
• /
• pp.85-95
• /
• 1991

All physical systems are nonlinear to some degree. The examples are relay, backlash, deadzone, saturation element and so on. In the linear control system design, it is useful method to restrict the nonlinearity to the linearity of system over the operation range. It is worth noting that nonlinearities may be intentionally introduced in to a system. A simple of an intentional non-linearity is the Bang-Bang controller which uses the On-Off relay. In this paper, an angular position servosystem made of a DC servomotor controlled by a microcomputer is discribed. Authors use two methods in the design of controller. The one is linear controller designed by the optimal feedback control theory only and the other is nonlinear controller designed by On-Off relay with optimal feedback control theory. To do the real time control, the controller is designed by using 16bit personal computer and A/D.D/A converter(12bit) is used in order to convert the signal. According to this way, the results from real time control are as follows. 2) Under the On-Off controller with hysterisis the influence of disturbance is considerably smaller than the linerar controller. 3) An increase in the sampling period has a destabilizing effect. 4)In the controller performance, the response time of the On-Off controller is longer than that of the linear controller. To close, we note that the On-Off controller with hysterisis is more attractive than the linear controller in the presence of the input limit.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1234-1243
• /
• 1992

본 연구에서는 국부적인 퍼지제어 셀(fuzzy control cell:cell)을 도입하여 계산량 감소를 달성하고, 추론과정을 선형근사화한 조직적인 설계를 통하여 선형제어 이론을 FLC의 실용적인 면에 접목하고자 한다. 이를 위하여, 확률밀도함수 형태의 멤버쉽함수(membership function)와 선형화된 제어공간이 얻어지도록 전반적인 제어방 책을 결정한 다음, 주어진 상태에 가장 지배적(dominant)인 규칙을 갖는 몇 개의 대표 점을 찾아서 그 점들로 구성된 퍼지제어 셀을 생성하고, 퍼지연산을 생성된 셀에서만 수행하여 알고리즘과 계산을 단순화시킨다. 평가기준을 공평함에 두어서 조건부연결 어 'AND'에 T-norm인 대수곱을 적용하여 적합도를 취하고, 규칙들의 작용이 병렬발화 라는 관점으로 규칙연결어 'ALSO'는 'AND'의 공액인 'OR'에 해당되는 대수합연산 대신 에 확률측도와 유사한 산술평균을 적용하여 퍼지추론을 한다. 그리고, 각각의 제어 규칙에 대하여 퍼지추론한 결과와 그것의 평균중심을 곱하여 통합한 후, 무게중심법으 로 역퍼지화하여 일반화된 제어값을 얻는다. 이 값을 PID제어기를 이용하여 구현한 디지틀 보상기를 통과시켜 시스템에 한 제어를 얻는 조직적인 방법을 제안한다.