• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1051-1060
• /
• 2000

Linear cyclic systems (LCS's) are a class of systems whose dynamic behavior changes cyclically. Such cyclic behavior is ubiquitous in systems with fundamentally repetitive motions (e. g. all rotating machinery). Yet, the knowledge of the noise and vibration transmission paths in LCS's is quite limited due to the time-varying nature of their dynamics. The first part of this two-part paper derives a generic expression that describes how the noise and/or vibration are transmitted between two (or multiple) locations in the LCS's. An analysis via the Fourier series and Fourier transform (FT) plays a major role in deriving this expression that turns out to be transfer function dependent upon the cycle position of the system. The cyclic nature of the LCS' transfer functions is shown to generate a series of amplitude modulated input signals whose carrier frequencies are harmonic multiples of the LCS' fundamental frequency. Applicability of signal processing techniques used in the linear time-invariant systems (LTIS's to the general LCSs is also discussed. Then, a criterion is proposed to determine how well a LCS can be approximated as a LTIS. In Part II, experimental validation of the analyses carried out in Part I is provided.

• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1061-1071
• /
• 2000

Linear cyclic systems (LCS's) are a class of systems whose dynamic behavior changes periodically. Such a cyclic behavior is ubiquitous in systems with fundamentally repetitive motion. Yet, the knowledge of the noise and vibration transmission paths in LCS's is quite limited due to the time-varying nature of their dynamics. The first part of this two-part paper derives a generic expression that describes how the noise and/or vibration are transmitted between two (or multiple) points in the LCS's. In Part II, experimental validation of the theoretical development of Part I is provided. The noise and vibration transmission paths of the scroll and rotary compressors (two typical LCS's) are examined to show that the LCS's indeed generate a series of amplitude modulated input signals at the output, where the carrier frequencies are harmonic multiples of the LCS' fundamental frequency. The criterion proposed in Part I to determine how well a given LCS can be approximated as a linear time-invariant systems (LTIS) is applied to the noise and vibration transmission paths of the two compressors. Furthermore, the implications of the experimental validations/applications are discussed in order to assess the applicability of the noise/vibration source and transmission path identification techniques based on the assumption that the system under consideration is linear and time-invariant.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.333-336
• /
• 2000

We discuss the direct methods (Gauss-Jordan and Gaussian eliminations) to solve linear systems on distributed memory parallel computers. It will be shown that the so-called row-cyclic storage gives rise to the best performance among the standard three (row-cyclic, column-cyclic and cyclic-cyclic) data storages. We also show that Gauss-Jordan elimination, rather than Gaussian elimination, is highly efficient for the direct solution of linear systems in parallel processing, though Gauss-Jordan elimination requires a larger number of arithmetic operations than Gaussian elimination. Numerical experiment is performed on HITACHI SR12201 with the standard libraries MPI and BLAS.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제2권5호
• /
• pp.253-264
• /
• 2008

Cyclic delay diversity (CDD) is considered a simple approach to exploit the frequency diversity, to improve the system performance in orthogonal frequency division multiplexing (OFDM) systems. Also, the linear precoding technique can significantly improve the performance of communication systems by exploiting the channel state information (CSI). In order to achieve enhanced performance, we propose applying linear precoding to the conventional CDD-OFDM transmit diversity schemes over Rayleigh fading channels. The proposed scheme works effectively with the accurate CSI in time-division-duplex (TDD) OFDM systems with CDD, where the reciprocity is assumed instead of channel state feedback. For a BER of $10^{-4}$ and the mobility of 3 km/h, simulation results show that a gain of 6 dB is achieved by the proposed scheme over both flat fading and Pedestrian A (Ped A) channels, compared to the conventional CDD-OFDM system. On the other hand, for a mobility of 120 km/h, a gain of 2.7 dB and 3.8 dB is achieved in flat fading and Vehicular A (Veh A) channels, respectively.

• 한국통신학회논문지
• /
• 제34권3A호
• /
• pp.197-204
• /
• 2009

순환 지연 다이버시티(CDD, cyclic delay diversity) 기법은 주파수 다이버시티를 이용하여 OFDM 시스템의 성능을 향상시키는 기법이다. 또한, 선형 프리코딩 기법은 채널 상황 정보(CSI, channel state information)를 이용하여 통신 시스템의 성능을 크게 증가시킬 수 있는 기법이다. 본 논문은 기존의 CDD-OFDM 송신 다이버시티 기법보다 향상된 성능을 얻기 위하여 선형 프리코딩 기법의 적용을 제안한다. 제안된 기법은 채널 상황 정보 feedback이 필요한 FDD(frequency division duplex) 시스템 보다, feedback을 사용할 필요 없이 채널 가역성(reciprocity)의 성질을 이용할 수 있는 TDD(time division duplex) 시스템에서 더욱 효과적이다. 모의실험 결과를 통해 본 논문에서 제안된 기법이 기존의 프리코딩을 사용하지 않는 CDD-OFDM 시스템에 비하여 target BER $10^{-4}$에서 3km/h의 이동성(mobility)을 갖는 flat 페이딩 채널과 Pedestrian A(Ped A) 채널, 120km/h의 이동성을 갖는 flat 페이딩 채널과 Vehicular A(Veh A) 채널에서 각각 6.3dB. 6.2dB, 2.8dB, 3.8dB의 SNR 성능 이득을 얻는 것을 보인다.

• Geomechanics and Engineering
• /
• 제14권4호
• /
• pp.377-386
• /
• 2018

This paper focuses on the development of a new non-linear macro-element for the modelling of soil-foundation interaction. Material and geometrical nonlinearities (soil yielding and foundation uplift respectively) are taken into account in the present macro-element to examine the response of shallow foundations under monotonic and cyclic loads. Several applications of soil-foundation systems are studied. The results obtained from these applications are in very favourable agreement with those obtained through other numerical models in the literature.

• 한국통신학회논문지
• /
• 제31권9C호
• /
• pp.846-852
• /
• 2006

${\kappa}$-오류 선형복잡도는 통신 시스템 및 스트림 암호 시스템 등에 사용되는 수열의 안정성 여부를 판단하는 중요한 척도이다. 본 논문은 p가 소수이고 2가 모듈로 $p^2$의 원시근일 때 $p^m$-주기 이진 수열의 k-오류 선형복잡도와 해당 오류벡터를 효과적으로 구할 수 있는 알고리듬을 소개한다. 또한 암호학적인 관점에서 정의된 ${\kappa}$-오류 선형 복잡도의 의미를 부호 이론의 관점에서 살펴봄으로써 부호어의 길이가 $p^m$인 이진 순환 부호를 효과적으로 복호할 수 있는 알고리듬을 소개하며 이러한 부호의 최소 거리에 관한 중요한 성질들을 유도한다.

• 한국통신학회논문지
• /
• 제36권10C호
• /
• pp.605-613
• /
• 2011

잡음에 있는 채널을 통한 디지털 통신에서는 채널 잡음에 대항하기 위해 오류정정부호(채널부호)를 사용하게 된다. 만일 송신측의 협조 없이 전송정보를 알아내려면 사용된 채널부호를 복원하는 것이 무엇보다 중요하다. 본 논문에서는 잡음에 오염된 수신 비트열로부터 사용된 채널부호의 여려 파라메타를 추출하여 궁극적으로 채널부호를 복원하는 채널부호 복원기법 중 순회부호(cyclic code)의 복원 기법을 제안한다.

• 한국경영과학회지
• /
• 제29권4호
• /
• pp.1-10
• /
• 2004

In this paper we study bounds for characteristics of stationary waiting times in (max, +)-linear systems with a Poisson arrival process. which are prevalent in manufacturing systems, kanban systems, cyclic and acyclic fork-and-join type systems, finite or infinite capacity tandem queues with various kinds of blocking, transportation systems, and telecommunication networks, and so on. Recently, some results on series expansion for characteristics, such as higher moments, Laplace transform, and tail probability, of transient and stationary waiting times in a class of (max, +)-linear systems via Taylor series expansions have been studied. In order to overcome the computational complexity in those results, we consider bounds for characteristics of stationary waiting times using valuable stochastic ordering results. Some numerical examples are also provided.

• 한국통신학회논문지
• /
• 제25권5B호
• /
• pp.859-870
• /
• 2000

본 논문에서는 OFDM(Orthogonal Frequency Division Multiplexing) 시스템에서 사용되는 보호구간을 하드웨어로 효율적으로 구현할 수 있는 기법을 제안하고, OFDM기반의 25 Mbps 무선 ATM 모뎀에 적용하여 ASIC칩을 설계한다. OFDM 시스템에서는 가장 긴 delay spread 보다 긴 cyclic prefix를 삽입하여 채널의 선형 컨볼루션을 이산 Fourier 영역에서 circular 컨볼루션으로 변형함으로써 부채널간의 직교성을 유지하고, OFDM 블록내의 심볼간 간섭은 방지한다. 그러나 OFDM 시스템에서 이러한 cyclic prefix를 사용하기 위해서는 원래 샘플을 저장하고 각 블록의 시작 위치에 cyclic prefix를 붙이기 위한 추가적인 하드웨어가 송신단에서 요구된다. 본 논문에서는 cyclic suffix를 사용한 새로운 기법을 제안하고, 제안된 기법이 기존의 cyclic prefix 기법에 비하여 매우 적은 하드웨어로 동일한 성능을 갖게 됨을 확인한다. 마지막으로 제안된 기법을 OFDM기반의 25 Mbps 무선 ATM 모뎀의 ASIC칩 설계에 적용하여 그 성능을 확인한다.