• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.115-118
• /
• 2001

일반적으로 반도체 제조 공정은 매우 복잡하고 다양한 공정들로 구성된다. 이러한 공정 중 Stage 부분은 웨이퍼에 회로 패턴을 기입하기 위하여 웨이퍼를 미리 지정된 위치로 이송하는 공정으로 매우 높은 정밀도가 요구되고 있다. Stage에 대해서는 x, y, z축 뿐아니라 각 축에 대한 회전까지도 고려한 6축 제어가 수행되어야 한다. 본 논문에서는 stage에 대한 정밀제어의 기반기술로서 선형 BLDC 모터를 이용하여 1축 위치제어 시스템의 제어에 관하여 연구하였다. 선형 BLDC 모터의 이동 중 발생하는 추럭리플을 보상하여 제어기 설계시 선형 시스템으로 고려하여 제어기를 설계할 수 있도록 하는 방법을 제안하였으며 실험을 통하여 1[${\mu}m$]의 해상도를 갖는 위치검출 엔코더를 이용하여 5[${\mu}m$]의 정밀도를 얻을 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.79-82
• /
• 2002

In this paper, we propose an adaptive repetitive control algorithm for the system the task of which is repetitive. The feedforward controller in the repetitive control system is modified by using the system parameter identifier in order to improve the convergence characteristics. The proposed algorithm is applied to the tracking control of a linear BLDC motor to which a periodic reference input is applied. It is illustrated by simulation results that the proposed adaptive repetitive control method yields better control performance than existing repetitive control even when modeling errors exist.

• Journal of Power System Engineering
• /
• v.21 no.5
• /
• pp.5-12
• /
• 2017

With the difficulties in increasing the efficiency of conventional crank-driven compressors due to mechanical loss, compressor manufacturers have investigated new kinds of compressor such as a free piston compressor mechanism. This study investigates the energy efficiency of two different types of compressor for a household refrigerator. One is the conventional crank-driven compressor, and the other one is a linear compressor. The energy efficiencies of these compressors are evaluated. Experimental results show that the linear compressor has 10% lower power consumption than the brushless direct-current (BLDC) reciprocating compressor. The linear compressor demonstrates excellent energy efficiency by reducing the friction loss. Furthermore, a motor efficiency exceeding 90% is achieved by using a linear oscillating mechanism with a moving magnet. Additionally, the compressor stroke to piston diameter ratio of the oscillating piston in the linear compressor can be adjusted in order to modulate the cooling capacity of the compressor for improved system efficiency.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1559-1566
• /
• 2015

The brushless DC motor (BLDCM) has many advantages. As a result, it is widely used in electric vehicle (EV) drive systems. To improve the reliability of the motor control system, a position sensorless control strategy based on a sliding mode observer (SMO) is proposed. The global fast terminal sliding mode observer (GFTSMO) is proposed to enhance the control performance of the SMO control system. The advantages of the linear sliding mode and the nonsingular terminal sliding mode (NTSM) are combined in the control strategy. The convergence speed of the system state is enhanced. The motor commutation point is obtained with the observation of the back EMF, and the instantaneous torque value of the motor is calculated. Therefore, the position sensorless control of the BLDCM is realized. Experimental results show that the proposed control strategy can improve the convergence speed, dynamic characteristics and robustness of the system.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.183-186
• /
• 2007

This Paper presents a solution to control the Brushless DC Motor(BLDCM) in Hard Disk Drive(HDD) using the Linear Quadratic Regulator(LQR). Generally, The speed of BLDCM in HDD is controlled by the lead angle control or the input voltage control using PAM(Pulse Amplitude Modulation) etc. These control methods have speed overshoot in speed control and need the long time until BLDCM reaches at the steady state. In order to improve the performance, this paper present the PI speed controller using the LQR based on vector control and the rotor position detection methods at the space vector PWM inverter. The proposed methods are proved by the simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1102-1103
• /
• 2007

This Paper presents a solution to control the Brushless DC Motor(BLDCM) in Digital Lightening Processor(DLP) using the Linear Quadratic Regulator(LQR). Generally, The speed of BLDCM in DLP is controlled by the lead angle control or the input voltage control using PAM(Pulse Amplitude Modulation) etc. These control methods have speed overshoot in speed control and need the long time until BLDCM reaches at the steady state. In order to improve the performance, this paper present the PI speed controller using the LQR based on vector control and the rotor position detection methods at the space vector PWM inverter. The proposed methods are proved by the experimental results

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.103-104
• /
• 2016

차량용 영구자석형 동기전동기는 벡터제어를 사용한다. 이때 사용 되는 벡터제어는 3상의 전류를 2상으로 변경 후 정지좌표계의 값을 동기좌표계로 변환 시켜줌으로써 순시제어를 실시한다. 이때 벡터제어 정지/동기 좌표계의 변환 시 위치 정보 ${\theta}$는 정지/동기 좌표계 변환의 기준으로 매우 중요한 정보이다. 따라서 정확한 제어를 위한 위치정보를 얻기 위해 이용되는 센서로 엔코더, 레졸버, 레치형 홀센서 등이 사용된다. 일반적으로 낮은 가격의 BLDC 모터의 경우 레치형 홀센서가 많이 이용된다. 그러나 레치형 홀센서의 경우 위치 정확도가 $60^{\circ}^C$로 한정되어 정확한 전기각을 추출하는데 문제가 있다. 본 논문에서는 BLDC 모터의 레치형 홀센서를 대신하여 리니어 홀센서를 이용함으로써 신호의 불균형 및 옵셋 등 문제를 보안, 이전의 시스템보다 더욱 정확한 전기각을 추출하여 벡터제어를 실시한다. 검증방법으로는 700[W]급 범용 영구자석형동기전동기를 이용 시험을 실시함으로써 검증하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.1
• /
• pp.70-75
• /
• 2010

The objective of this paper is to propose a new velocity measurement method for an electro-mechanical fin actuator. The model of the electro-mechanical fin actuator includes uncertainties such as unknown disturbances and parameter variations in flight condition. So, an electro-mechanical fin actuator system needs robust control algorithm which requires not only position information but also velocity information. Usually, analog tachometers have been used for velocity feedback in an electro-mechanical fin actuator. However, using these types of sensors have problems such as the cost, space, and malfunction. These problems lead to propose a new velocity measurement method using linear type Hall-effect sensor. In order to verify the proposed method, several experiments are performed using Model Following Sliding Mode Controller(MFSMC). It is shown that the MFSMC with a new velocity measurement method using linear type Hall-effect sensor can satisfy the requirements without using of velocity sensor.

• Journal of information and communication convergence engineering
• /
• v.8 no.1
• /
• pp.95-98
• /
• 2010

The Electro Magnetic (EM) Acceleration and Deceleration (ACC/DCC) system of the Ferromagnetic Ball(FB) is the linear motor's final structural development which can be used for devices that conserve energy, gaming or rail gun. By accelerating the FB within the coil structure, it is difficult to utilize the FB's magnetizing feature via the ACC/DCC system. There is much monopole space inside the monopole coil. By using this particular feature of the FB, starting coil and Monopole Coil Structure (MCS) can be structurally separated and another simple electric related control system can be experimented for further development. For the purpose of development a review is needed of the control system of both basic stepper motor and BLDC motor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.7
• /
• pp.675-682
• /
• 2009

Instead of direct driving like BLDC, the induction principle is adopted as a driving one for planar stage. The stage composed of four linear induction motors put in square type is activated by two-axial forces; low-frequency attractive force and thrust force of the linear induction motors. Here, the modified vector control whose new inputs are q-axis current and dc current biased to three phase current instead of d-axis current or flux current is applied extensively to overall motion of the stage. For the developed system, the precision step test and the constant velocity test are tried to guarantee its feasibility for TFT-LCD pattern inspection. However, to exclude a discontinuity due to phase shift and minimize a force ripple synchronized with the command frequency, the initial system is revised to the antagonistic structure over the full degree of freedom. Concretely describing, the porous air bearings guide an air-gapping of the stage up and down and a pair of liner induction motors instead of single motor are activated in the opposite direction each other. The performances of the above systems are compared from trapezoid tracking test and sinusoidal test.