• 한국정밀공학회지
• /
• 제26권6호
• /
• pp.50-58
• /
• 2009

Micro laser fabrication techniques can potentially be used for the manufacture of microstructures on the thin flat surfaces with large diameter that are frequently used in semiconductor industries. However, the large size of wafers can cause the degraded machining accuracy of the surface because it can be tilted or distorted by geometric errors of machines or the holding fixtures, etc. To overcome these errors the off-line focusing error compensation method is proposed. By using confocal autofocus system, the focusing error profile of machined surface is measured along the pre-determined path and can be compensated at the next machining process by making the corrected motion trajectories. The experimental results for silicon wafers and invar flat surfaces show that the proposed method can compensate the focusing error within the level of below $6.9{\mu}m$ that is the depth of focus required for the laser micromachining process.

• 한국가시화정보학회지
• /
• 제11권2호
• /
• pp.41-45
• /
• 2013

Two-photon microscopy (TPM) is minimally-invasive 3D fluorescence microscopy based on nonlinear excitation, and TPM can visualize cellular structures based on auto-fluorescence. Line-scanning TPM is one of high-speed TPM methods without sacrificing the image resolution by using spatial and temporal focusing. In this paper, we developed line-scanning TPM based on spatial and temporal focusing for auto-fluorescence imaging by exciting the tryptophan. Laser source for this system was an optical parametric oscillator (OPO) and it made near 570 nm femtosecond pulse laser. It had 200fs pulse width and 1.72 nm bandwidth, so that the achievable depth resolution was 2.41um and field of view (FOV) is 10.8um. From the characterization, our system has 3.0 um depth resolution and 12.3 um FOV. We visualized fixed leukocyte cell sample and compared with point scanning system.

• Asia Marketing Journal
• /
• 제4권1호
• /
• pp.101-115
• /
• 2002

현재 국내외의 많은 기업들이 고객과의 효율적인 커뮤니케이션을 위해 IMC 전략을 수립하고 있으며, 최근에는 인터넷 기술과 합쳐져 IMC 전략의 효율성 증대에 많은 변화를 가져오고 있다. 본 연구에서는 국내 주택시장에서 두산건설과 인터넷 패션전문업체인 웹넷코리아가 공동으로 We've 아파트 분양과정에서 시행된 on-line과 off-line 판매촉진의 통합적 활용과정과 성과에 대해 설명하였다. Off-line 행사와 함께 진행된 3차례에 걸친 판촉행사는 site traffic 증대, 판촉행사 참여, 그리고 분양현장으로의 고객유인과 구매에 이르기까지 높은 성과를 거둔 것으로 나타났다.

• 한국광학회지
• /
• 제30권3호
• /
• pp.94-100
• /
• 2019

본 연구에서는 광 지연선로를 이용한 스퀸팅(squinting)이 없는 위상배열 안테나의 근접장 미세파장 포커싱(subwavelength focusing)을 디자인하고 전산모사를 통해 검증하였다. 마이크로파 파장에서 위상배열 안테나의 수치적 계산을 위해 호이겐스-프레넬(Huygens-Fresnel) 원리를 적용하였다. 제안하는 시스템은 첩 광섬유 격자(chirped fiber grating)에 기반한 광 지연선로를 이용하여 빔 스퀸팅이 생기지 않는다는 것을 전산모사를 통해 확인하였다. 그리고 개별 안테나의 배열은 광학렌즈시스템에서 회절 소자로 간주할 수 있음에 착안해 높은 개구율(numerical aperture)을 구현하고 미세파장 포커싱을 얻었다. 또한, 위상배열 안테나의 안테나 사이 거리를 반파장 이하로 줄여 사이드 로브를 억제할 수 있음을 보였다.

• 한국유통학회지:유통연구
• /
• 제8권2호
• /
• pp.1-18
• /
• 2003

본 연구는 온라인 인터넷쇼핑몰과 오프라인 백화점간 소비자의 반응에 대한 통합적 접근을 시도하여 각 업태별로 쇼핑상황에 따른 쇼핑가치의 조절역할을 분석하는데 중점을 두었다. 오프라인 백화점과 온라인 인터넷쇼핑몰에서의 쇼핑행동 차이를 하나의 틀에서 분석하고 영향요인을 규명함으로서 온ㆍ오프라인 통합의 효과나 멀티채널 전략에 적용할 수 있는 소비자행동의 변화를 파악하였다. 향후에는 단순한 4P's 중심의 마케팅 믹스(marketing mix)전략 보다는 온라인과 오프라인별 소비자의 쇼핑가치를 중심으로 한 고객세분화기준을 적용함으로서 효과적인 채널전략을 수립하는데 초점을 두어야 할 것이다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1988년도 광학 및 양자전자학 워크샵
• /
• pp.47-54
• /
• 1988

아홉 개의 TEA Co 레이저선에 대한 암모니아 매질의 비선형 굴절계수 (n%)를, 매질을 통과한 광속이 self-focusing 또는 self-defocusing 에의해 겪게되는 공간적 광속 변화를 측정함으로써 결정하였다. 암모니아 매질을 통과하여 변형된 광속의 전장은 가우스 함수의 금수로 주어지는 스미스의 표현(5)으로 근사할수 있었으며, 실험치와 비교하여 보았다. 아홉 개의 레이저선중 여덟 개의 레이저선은 self-focusing 현상을 나타애렀으며9R(16) line은 self-defocusing 현상을 나타내었다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권7호
• /
• pp.313-318
• /
• 2006

An automatic sample centering system is underway at the protein crystallography beam line of the Pohang Light Source to improve the efficiency of the crystal screening process. A sample pin which contains a protein crystal is mounted on a goniometer head. Then the crystal should be moved to the center of X-ray beam by controlling the motorized goniometer to obtain diffraction data. Since the X-ray beam is located at the center of the image obtained from the CCD camera when the image of the sample pin is in focus, an auto-focusing algorithm is a very important part in the auto-sample-centering system. However the results of applying several well-known auto focusing algorithms directly to the images are not satisfactory owing to the following factors: misalignment of CCD camera, non-uniform cryo-stream in the background of the image and the supporter of the loop. The performance of an auto-focusing algorithm can be increased if the algorithm is applied to only the loop region identified. Non-uniform cryo-stream and a various illumination condition and a stain, which is shown in the image, are main obstacles to loop region identification. In this paper, a simple loop region identification algorithm, which can solve these problems, is proposed and the effective ness of the proposed scheme is shown by applying the auto-focusing algorithm to the loop region identified.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.776-781
• /
• 2008

In this paper, comments on the needs of establishment of railway test line - capable of mid and long term performance evaluation of vehicle/infra/electricity/signal component/system - are described. Based on the previous studies, national/social/economic needs, the states of similar lines of foreign countries, concept of test line, and basic application plan are summarized. Especially, core things needed to the establishment of test line are commented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1014-1017
• /
• 2007

Sound focusing technologies has been studied for various purposes from early 1990s. As a result, these technologies make us possible to apply in many uses. For example, we can treat tumors using focused ultrasonic waves without surgical knife and communicate in the ocean using time reversal array. Also applications for personal audio system become issues. Recently, as technologies are developing, in some applications, needs for regional focusing become increasing because previously suggested focusing methods, such as phase conjugation, time reversal and inverse filtering, were all about a point focusing. Therefore, studies on regional focusing method are essentially needed. Regional focusing method was firstly mentioned by Choi and Kim in 2002: acoustic contrast control. However, in regional focusing, physical interpretations between control variables and results are still not easy because of its complexity. In this regard, we tried to understand the relations between control variables and results in wavenumber domain and suggested a solution method for regional focusing: wavenumber spectrum matching. We also showed how to make spatially focused sound shape using the suggested method from the simplest case: line focusing.

• 비파괴검사학회지
• /
• 제29권3호
• /
• pp.242-247
• /
• 2009

The ability of time reversal techniques to focus ultrasonic beams on the source location is important in many aspects of ultrasonic nondestructive evaluation. In this paper, we investigate the time reversal beam focusing of ultrasonic array sensors on a defect in layered media. Numerical modeling is performed using the commercially available software which employs a time domain finite difference method. Two different time reversal approaches are considered - the through transmission and the pulse-echo. Linear array sensors composed of N elements of line sources are used for signal reception/excitation, time reversal, and reemission in time reversal processes associated with the scattering source of a side-drilled hole located in the second layer of two layer structure. The simulation results demonstrate the time reversal focusing even with multiple reflections from the interface of layered structure. We examine the focusing resolution that is related to the propagation distance, the size of array sensor and the wavelength.