• 한국멀티미디어학회논문지
• /
• 제20권2호
• /
• pp.225-233
• /
• 2017

Line-laser beams are used for accurate measurement of 3D shape, which is robust to external illumination. For depth measurement, we project a line-laser beam across an object from the face and take an image of the beam on the object surface using a CCD camera at some angle with respect to the face. For shape measurement, we project parallel line-laser beams with narrow line to line distance. When a layer of thin materials attached to a cylinder is long narrow along its circumference, we can measure the shape of the layer with a small number of parallel line beams if we project line beams along the circumference of the cylinder. Measurement of the depth of the attached materials on a line-laser beam is based on the number of pixels between an imaginary line along the imaginary cylinder without the attached materials and the beam line along the materials attached to the cylinder. For this we need to localize the imaginary line in the captured image. In this paper, we model the shape of the line as an ellipse and localize the line with least square estimate. The proposed method results in smaller error (maximum 0.24mm) than a popular 3D depth camera (maximum 1mm).

• 복식
• /
• 제60권3호
• /
• pp.1-9
• /
• 2010

The purpose of this study is to develop Blue-Jean Design for Ideal Body Shape. The final aim of Fashion design is looks beauty of people by optical illusion. This study is based on Gestalt therapy and, is blue jeans design using optical illusion of vertical line for ideal beauty body image. Optical illusion for blue-jean design effect to achieve the ideal body shape. We can accumulate the preceding study for modern clothing from design and the related optical illusion effects. Vertical line stitches have all the advantages especially in pants design. I design blue jeans using optical illusion theory. The results of this study are as follows: First, Vertical line helps that jean has the long body shape effectively. Second, Jeans which have two or more vertical lines is more effective than simple Jean in order to make slim body shape. Third, Appropriate position of horizontal lines can be effective to make long body shape. Fourth, Top stitch, pin-tuck and pleats can be applied to vertical or horizontal lines instead of cutting lines.

• 한국농공학회지
• /
• 제22권2호
• /
• pp.64-82
• /
• 1980

The aim of this thesis, when water permeates dam, is to study the shape of seepage line and seepage quantity. As for the process, various sand model dams of same capacity were constructed in the water tank : they are a central, middle, inclined, up and down stream point of which is paralled, and filter-installed types. And the slope of seepage line and seepage quantity in these various models for experiment were measured, observed data were analyzed, and several formulas which already published were compared and examined. As for the shape of seepage line, the relation between upstream water level and exit: slope of seepage line, near the entrance and exit point, geometrically similar model, and the shape of seepage line filter-installed were examined. As regards to the seepage quantity, several formulas which already published and testing result values were compared and examined, and relation with the slope of seepage line, the seepage quantity, the slope of upstream point, and the upstream water level were mutually studied. Particulary, when horizontal filter was installed, propriety of the existing formulas for effective filter length w as examined, and the relative position of exit point in various. conditions was also studied.

• 산업경영시스템학회지
• /
• 제28권3호
• /
• pp.98-108
• /
• 2005

The assembly line balancing problem has been focused by many research works because the efficient management of the assembly line might influence not only the quality of the products but also the working conditions for the workers. This paper deals with U-shape mixed-model assembly line balancing and considers both the processing time and the physical workloads. We suggest the goal programming approach for this situation and to overcome some difficulties of finding optimal solution, we adopt the genetic algorithm that is one of the most promising solution techniques. We tested several test problems and present the results that indicate some improvement for the line balancing as well as the stable performance of the algorithm.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.439-443
• /
• 2011

Using the projection operator technique, a reduced density matrix theory for linear absorption spectrum of energy transfer systems is developed for the theoretical absorption line shape of the systems with non-Condon transitions. As an application, we considered a model system of OH vibrations of water. In the present model calculation, the OH vibration modes are coupled to each other via intra-molecular coupling mechanism while their intermolecular couplings are turned off. The time-correlation functions appearing in the formulation are calculated from a mixed quantum/classical mechanics method. The present theory is successful in reproducing the exact absorption line shape. Also the present theory was improved from an existing approximate theory, time-averaged approximation approach.

• 한국유체기계학회 논문집
• /
• 제9권3호
• /
• pp.7-13
• /
• 2006

Shape optimization of a rotor blade in a single-stage transonic axial compressor has been performed using a response surface method and three-dimensional Navier-Stokes analysis. Two shape variables of the rotor blade, which are used to define a blade skew, are introduced to increase an adiabatic efficiency. Throughout the shape optimization of a rotor blade, the adiabatic efficiency is increased to about 2.2 percent compared to that of the reference shape of the stator. The increase in efficiency for the optimal shape of the rotor is due to the pressure enhancement, which is mainly caused by moving the separation position on the suction surface of rotor blade to the downstream direction.

• 소성∙가공
• /
• 제10권7호
• /
• pp.579-583
• /
• 2001

Shape changes of a workpiece in an Eulerian Finite Element analysis for the steady state, three-roll-stand shape rolling are modelled. Although an Eulerian analysis has many advantages for the steady state rolling problems, it necessitates an assumption about the unknown shape of the control volume. In almost all cases, the assumed control volume does not match the final shape and the control volume should be updated. This update can be accomplished by performing a free surface correction. The final shape of a material point, which has a spherical shape at the inlet, can be also predicted by integrating a deformation gradient along a stream line. Analyses of three-roll-stand shape rolling are performed and the results are discussed in detail.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.328-331
• /
• 2001

Shape changes of a workpiece in an Eulerian Finite Element analysis for the steady state. three-roll-stand shape rolling are modelled. Although an Eulerian analysis has many advantages for the steady state rolling problems, it necessitates an assumption about the unknown shape of the control volume. In almost all cases. the assumed control volume does not match the final shape and the control volume should be updated. This update can be accomplished by performing a free surface correction. The final shape of a material point, which has a spherical shape at the inlet, can be also predicted by integrating a deformation gradient along a stream line. Analyses of three-roll-stand shape rolling is in detail examined.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.946-950
• /
• 2003

In this paper, a computer-vision based pipe shape inspection algorithm is developed. The algorithm uses the modified Hough transformation and a line-scanning approach to identify the edge line and radius of the pipe image, from which the eccentricity and dimension of the pipe-end is calculated. Line and circle detection was performed using Laplace operator with input image, which are acquired from the front and side cameras. In order to minimize the memory usage and the processing time, a clustering method with the modified Hough transformation for line detection. The dimension of inner and outer radius of pipe is calculated by proposed line-scanning method. The method scans several lines along the X and Y axes, calculating the eccentricity of inner and outer circle. by which pipes with wrong end-shape can be classified removed.

• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.108-118
• /
• 1994

By using a concept of interrelation vector between line segments a new algorithm for partial shape recognition of two-dimensional objects is introduced. The interrelation vector which is invariant under translation rotation and scaling of a pair of line segments is used as a feature information for polygonal shape recognition. Several useful properties of the interrelation vector are also derived in relation to efficient partial shape recognition. The proposed algorithm requires only small space of storage and is shown to be computationally simple and efficient.