• Journal of Korea Multimedia Society
• /
• v.6 no.2
• /
• pp.224-229
• /
• 2003

In this paper, an effective skeleton method is proposed in order to obtain an enhanced digital image of skeleton line. The edge-detection method is applied in the preprocessing stage and after that, the modified Parallel method is applied to obtain the improved image of skeleton line. The existing parallel methods are Zhang, Lu and Wang, and Paul methods. Firstly, a parallel process method Is applied, and the proposed method is applied that the original is compared with the four neighbor pixels and four corner pixels of mask. In conclusion, the proposed method shows an improved connectivity and quality of skeleton line.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.16-24
• /
• 1999

본 논문은 불확정 시스템의 견실한 이상검출기법의 적용을 위한 실시간 이상검출기법에 대하여 다루며 대상 시스템은 산업용보일러 시스템이다. 본 논문에서 기술된 이상검출기법은 Kwon (1994) 등에 의하여 이미 제시된바 있는 견실한 이상검출기법의 오프라인 배치 처리 알고리즘을 실시간 적용을 위해 확장된 것이며 모델링 오차에 의한 불확실성, 비선형 시스템을 특정 동작점에서 선형화 하는 과정에서 발생하는 선형화 오차, 잡음 등을 고려하였고, 보일러 시스템을 대상으로 한 모의 실험을 통해 본 알고리즘의 우수성을 보였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.118-123
• /
• 1999

Hough transform is well employed to retect or recognize the lines in image processing or in computer vision. Curve of the logarithm of ranges against the bearing does not change its shape according to data trints. This fact suggests that calculation cost can be remarkably reduced. An effective line detection algorithm is represented.sented.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.3
• /
• pp.212-216
• /
• 2011

Fault detection technique for photovoltaic power systems is significant to dramatically reduce economic damage in industrial fields. This paper presents a novel fault detection approach using Fourier neural networks and stochastic decision making strategy for photovoltaic systems. We achieve neural modeling to represent its nonlinear dynamic behaviors through a gradient descent based learning algorithm. Next, a general likelihood ratio test (GLRT) is derived for constructing a decision malling mechanism in stochastic fault detection. A testbed of photovoltaic power systems is established to conduct real-time experiments in which the DC power line communication (DPLC) technique is employed to transfer data sets measured from the photovoltaic panels to PC systems. We demonstrate our proposed fault detection methodology is reliable and practicable over this real-time experiment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.376-382
• /
• 2014

E-Actuator is an essential part of an eVGT, it receives the command from the main ECU and controls the vane. An e-Actuator failure can cause an abrupt change in engine output and it may induce an accident. Therefore, it is required to detect anomalies in the e-Actuator in real time to prevent accidents. In this paper, an e-Actuator fault detection method using on-line parameter identification is proposed. To implement on-line fault detection algorithm, many constraints are considered. The test input and sampling rate are selected considering the constraints. And new recursive system identification algorithm is proposed which reduces the memory and MCU power dramatically. The relationship between the identified parameters and real elements such as gears, spring and motor are derived. The fault detection method using the relationship is proposed. The experiments with the real broken gears show the effectiveness of the proposed algorithm. It is expected that the real time fault detection is possible and it can improve the safety of eVGT system.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.88-94
• /
• 2007

This study deals with on-line fault detection and diagnosis for heat exchanger of variable speed refrigeration system. Conventional studies about fault of heat exchanger in refrigeration system have used temperature and pressure information. The temperature and pressure are able to be used valuably for faults detection of constant speed refrigeration system. However in case of variable speed refrigeration system, the temperature and pressure are no longer useful information for fault detection due to compensation effect of feedback controller. While current information is possible to detect faults of variable speed refrigeration system. The current information was detected in an inverter, it was used after transforming rms value. The faults of variable speed refrigeration system are divided into electrical faults and mechanical faults. We performed fault detection and diagnosis about heat exchanger among mechanical faults such as condenser fouling and evaporator fan fouling through some experiments.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.612-615
• /
• 2003

In this paper, a design of radiation detector for gamma column scanner is introduced. Distillation column is important unit in Petro-chemical industries, and its on-line diagnose is very important. To get density profile measured by the radiation transmitted through column is well method for on-line diagnose as gamma scanning. For this purpose radiation detection circuit, radiation source and mechanical system for moving source and detector are required. Conventional radiation detection circuit for this application is sensitive to electric noise because of interface between the radiation circuit and the controller for mechanical system. The radiation detection system introduced here is using loop coil instead of slip ring to remove contact noise. Radiation detection system designed here for gamma scanning consist of BGO detector, high voltage circuit, PHA circuit and FSK modem. The BGO detector is used as radiation sensor, high voltage circuit and peak height analysis circuit is essential to process the signal generated from BGO detector. Micro controller convert measured data into ASCII data. FSK modem transmit ASCII data. Transmitted ASCH data is picked up in antenna coil and processed for combined function with mechanical system. This method gives good result by isolating the controlling circuit of mechanical system from radiation detecting circuit which is sensitive to noise.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.177-180
• /
• 2005

Three dimensional shaded images are standard visualization method for CAD models on the computer screen. Therefore, much of the effort in the visualization of CAD models has been focused on how conveniently and realistically CAD models can be displayed on the screen. However, shaded 3D CAD data images captured from the screen may not be suitable for some application areas. Technical document, either in the paper or electronic form, can more clearly describe the shape and annotate parts of the model by using projected 2D line drawing format viewed from a user defined view direction. This paper describes an efficient method for generating such a 2D line drawing data in the vector format. The algorithm is composed of silhouette line detection, hidden line removal and cleaning processes.

• Journal of Computing Science and Engineering
• /
• v.8 no.2
• /
• pp.119-128
• /
• 2014

The appearance of retinal blood vessels is an important diagnostic indicator of serious disease, such as hypertension, diabetes, cardiovascular disease, and stroke. Automatic segmentation of the retinal vasculature is a primary step towards automatic assessment of the retinal blood vessel features. This paper presents an automated method for the enhancement and segmentation of blood vessels in fundus images. To decrease the influence of the optic disk, and emphasize the vessels for each retinal image, a multidirectional morphological top-hat transform with rotating structuring elements is first applied to the background homogenized retinal image. Then, an improved multiscale line detector is presented to produce a vessel response image, and yield the retinal blood vessel tree for each retinal image. Since different line detectors at varying scales have different line responses in the multiscale detector, the line detectors with longer length produce more vessel responses than the ones with shorter length; the improved multiscale detector combines all the responses at different scales by setting different weights for each scale. The methodology is evaluated on two publicly available databases, DRIVE and STARE. Experimental results demonstrate an excellent performance that approximates the average accuracy of a human observer. Moreover, the method is simple, fast, and robust to noise, so it is suitable for being integrated into a computer-assisted diagnostic system for ophthalmic disorders.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.131-137
• /
• 2005

This paper describes a new approach to the algorithm and fundamental characteristics of the device for monitoring the leakage currents flowing through zinc oxide (ZnO) surge arresters. In order to obtain a technique for a new on-line monitoring device that can be used in the deterioration diagnosis of ZnO surge arresters, the new algorithm and on-line leakage current detection device for extracting the resistive and capacitive currents using the phase shift addition method were proposed. The computer-based on-line monitoring device can sense accurately the power frequency leakage currents flowing through ZnO surge arresters. The on-line leakage current monitoring device of ZnO surge arresters proposed in this work has the high sensitivity compared to the third harmonic leakage current detection devices. As a consequence, it was found that the proposed leakage current monitoring device would be useful for forecasting the defects and degradation of ZnO surge arresters.