• 한국산학기술학회논문지
• /
• 제7권5호
• /
• pp.887-894
• /
• 2006

본 논문은 런 길이를 이용해 필기체 한글 문자에서 자획의 교점을 검출하는 새로운 방법을 제안한다 이를 위해 첫째로, 수평 런 길이와 수직 런 길이를 이용해 필기체 한글 문자의 자획 두께를 구하고, 둘째로, 자획 두께를 이용해 입력 문자의 자소를 수평 성분과 수직 성분으로 분리하며, 마지막으로, 자획의 수평 성분과 수직 성분을 이용해 자획의 교점을 구하는 기술을 제안한다. 수평 성분과 수직 성분 분석은 각도와 관계없이 자획 두께와 런 길이의 변화량만을 이용해 구한다. 자획의 교점은 오프라인 필기체 한글 인식을 위한 요소 기술 중 하나인 자소 분리를 위한 분리점 후보가 되며 분리된 자획은 필기체 한글 인식을 위한 특징을 나타낸다.

• 제어로봇시스템학회논문지
• /
• 제11권6호
• /
• pp.518-523
• /
• 2005

Strip off-center is one of the major problems in hot strip mill line. The key to good centering is having good equipment, modern control systems, excellent maintenance and an understanding of milling process. Therefore, this study aims to develop a system that is useful for quantitative analysis of strip off-center. In this study, the measuring method of strip off-center was thoroughly studied and the exclusive control board to line scan camera were designed. Also, the manipulated type housing for line scan camera was developed to adjust initial parameters for strip width and center line. In order to check the accuracy and usefulness of the developed system, FM stand in $\#2$ Hot Strip Factory in Pohang Steel Works was targeted.

• 스마트미디어저널
• /
• 제4권3호
• /
• pp.44-49
• /
• 2015

Text line segmentation is a preprocessing step in OCR, which can significantly influence the accuracy of document analysis applications. This paper proposes a novel methodology for the text line segmentation of handwritten documents. First, the average width of the connected components is used to form a 1-D Gaussian kernel and a smoothing operation is then applied to the input binary image. The adaptive binarization of the smoothed image forms the final text lines. In this work, the segmentation method involves two stages: firstly, the large connected components are labelled as a unique text line using text line area mapping. Secondly, the final refinement of the segmentation is performed using the Euclidean distance between the text line and small connected components. The group of uniquely labelled text candidates achieves promising segmentation results. The proposed approach works well on Korean and English language handwritten documents captured using a camera.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.329-332
• /
• 2006

To study the effect of the macroscopic TVLEM(Three Vertical Line Element Model) which is developed in 2D, a bearing wall system is selected and 2D and 3D pushover analyses are carried out. In 2D model, the participating width of a flage wall to lateral resistance is modelled based on Paulay's effective width. From the comparisons of roof displacements, 2D model which uses the effective width of flange wall has better prediction and less analysis time than 3D model which has intrinsically the full width of the flange that causes higher stiffness and strength and shorter deformation capacity than 2D model.

• 대한전자공학회논문지
• /
• 제25권5호
• /
• pp.495-500
• /
• 1988

The effectiveness of tri layer resist (TLR) technique is compared with that of single layer resist (SLR) technique in order to make a 0.8um pattern with the linewidth deviation of 10 percents. SLR technique is not appropriate to shape the micro-pattern on oxide and aluminum steps because of the standing wave effect and the light scattering effect in shaping the resist pattern. On the contrary, the uniform line with a width of 0.8um on oxide and aluminum steps can be formed by TLR technique, reducting such effects. The planarization and the light absorption coefficient of the bottom layer resist in TLR are optimized by exposing it to ultra violet light after baking it for 30min at 230\ulcorner. An uniform line with a width of 0.8um on oxide step is defined with the light absorption coefficient of 0.85 whereas that on aluminum step is defined with 0.95.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.867-868
• /
• 2004

The maximum width of HAZ of SA508치.3 steel produced by overlay RPV cladding was approximately 10 mm and it was composed of variety of microstructures with various grain size and precipitates. In addition, along the weld fusion line there formed a heavy carbide precipitation zone in the width of $20{\sim}30\;{\mu}m$. 2. As the specimen sampling position approached to the weld fusion line, the increase in yield and tensile strength was approximately 90 and 40 MPa, respectively. Meanwhile, the plastic fracture strain reduced from 14 to 8 percent. 3. The lowest SP energy and the highest ductile to brittle transition temperature in the HAZ were observed at the coarse- and fine-grained HAZ.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.99-110
• /
• 1995

An industrial robot needs a simple and robust control algorithm obtaining high precision control performance in spite of disturbance and parameter's change. In this paper, for solving this problem, a new sliding mode control algorithm is proposed and applied to the trajectory control of a SCARA type robot. The proposed algorithm has diminished the chattering occurring in sliding mode by setting a dead band along the switching line on the phase plane. It shows that we can easily obtain a simple switching control input satisfying sliding mode in spite of regarding nonlinear terms of a manipulator and servo system as disturbance. A guideline for selection of dead-band width is determined by optimal value of cost function presenting magnitudes of chattering and error. By this algorithm, we can expect the high performance of the trajectory tracking of an industrial robot which needs a robust and simple algorithm.

• 한국표면공학회지
• /
• 제29권1호
• /
• pp.60-72
• /
• 1996

A photoetching process is widely used for small and high precision parts in machinery, electronic and semi-conductor industries. One of the high precision parts, grid is very important part of digitron which use electron display, and it is fabricated by only photoetching process because of high precision. In this study, to develop high precision digitron grid, characteristics of etching solution were investigated with electrochemical test, that was potentiodynamic test and immersion test in the ferric chloride solution and added some additives. Based on the electrochemical etching test, grid was fabricated by continuous photoetching process at various etching condition. From the result of measured line width and etching depth under-cut and etching factor were calculated. For the fabrication of 25$\mu\textrm{m}$ line width, optimal etching condition was etching temperature 40~$45^{\circ}C$, spray pressure 1.5kg/$\textrm{cm}^2$ and etching time 3~4min.

• Journal of Magnetics
• /
• 제17권4호
• /
• pp.255-260
• /
• 2012

In this study, we determine that the electron paramagnetic resonance line-width (EPRLW) is axially symmetric about the c-axis and analyze the spin Hamiltonian with an isotopic g-factor of 1.9920 at a frequency of 9.5 GHz. It should be noted that the electron paramagnetic resonance signals are Lorentzian. Our findings show that the EPRLW decreases exponentially with an increase in the temperature; i.e., its temperature dependence in the range 300-400 K obeys Arrhenius behavior, this kind of temperature dependence indicates an off-center a motional narrowing of the spectrum when $Mn^{2+}$ impurity ions substitute for $Nb^{5+}$ ions. The specific heats follow a linear dependence suggesting a simple Debye $T^3$ behavior.

• 대한전자공학회논문지
• /
• 제13권1호
• /
• pp.31-34
• /
• 1976

본 논문에서는 특성임피이던스가 선형적으로 변화하는 불균일박송선로의 특성, 특히 임피이던스정합특성을 해석하고 아울러 특성임피이던스 및 스트립의 폭이 선형적으로 변화하는 하는 불균일 마이크로스트립의 정합특성을 실험적으로 고찰하였다. In this paper, the characteristics, especially impedance matching behavior of linearly tapered transmission line which impedance is varied linearly is analyzed. Also impedance matching of nonuniform microstrip which characteristic impedance or width of strip is varied linearly are experimentally investigated.