• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2006년도 춘계 학술발표회 논문집 제3권1호(통권3호)
• /
• pp.205-213
• /
• 2006

Membrane structures, a kind of lightweight soft structural system, are used for spatial structures. The design procedure of membrane structures are needed to do shape finding, stress-deformation analysis and cutting pattern generation, because the material property has strong axial stiffness, but little bending stiffness. The problem of cutting pattern is highly varied in their size, curvature and material stiffness. So, the approximation inherent in cooing pattern generation methods is quite different. Therefore the ordinary computer software of structural analysis & design is not suitable for membrane structures. In this study, we develop the program for cutting pattern generation using geodesic line, and investigate the result of example's cutting pattern in detail.

• 한국전기전자재료학회논문지
• /
• 제30권12호
• /
• pp.776-781
• /
• 2017

In this study, we investigated the effect of electrode pattern design on the thermal shock resistance and temperature uniformity of a ceramic heater. A cordierite substrate with a low thermal expansion coefficient was fabricated by tape casting, and a tungsten electrode was printed and used as a heating element. The temperature distribution of the ceramic heater was calculated by a finite-element method (FEM) by considering various electrode patterns, and the tensile stress distribution due to the thermal stress was calculated. In the electrode pattern with a single-line width, the central part of the ceramic heater was heated to the maximum temperature, and the position of the ceramic heater having a double-line width was changed to the maximum temperature, depending on the position of the minimum line width pattern. The highest tensile stress was found along the edges of the ceramic heater. The temperature gradient at the edge determined the tensile stress intensity. The smallest tensile stress was observed for electrode pattern D, which was expected to be advantageous in resisting thermal shock failures in ceramic heaters.

• 한국레이저가공학회지
• /
• 제13권2호
• /
• pp.1-5
• /
• 2010

A high speed laser texturing method that relies on laser scanner conditions, to form pattern shapes with micro-narrow surface detail such as dotted line features is demonstrated and analyzed. For example, this method may be used to piston ring and gear part for automotive. Data on friction characteristics of two laser patterns employed for STD61 steel will be shown. Comparison of pattern depths obtained by repetition overlapping process with laser scanner to the results on friction coefficient will be provide. It will be shown that friction characteristic in dotted line patterns can significantly depend upon interaction with the lubrication and laser pattern conditions. Laser pattern processing into a shallow depth provides only slight improvement in friction, while work into a deep shape indicates a significant improvement.

• 제어로봇시스템학회논문지
• /
• 제9권11호
• /
• pp.937-942
• /
• 2003

We present a self-localization method for mobile robots using vertical line features of indoor environment. When a 2D map including feature points and color information is given, a mobile robot moves to the destination, and acquires images from the surroundings having vertical line edges by one camera. From the image, vertical line edges are detected, and pattern vectors meaning averaged color values of the left and right regions of the each line are computed by using the properties of the line and a region growing method. The pattern vectors are matched with the feature points of the map by comparing the color information and the geometrical relationship. From the perspective transformation and rigid transformation of the corresponded points, nonlinear equations are derived. Localization is carried out from solving the equations by using Newton's method. Experimental results show that the proposed method using mono view is simple and applicable to indoor environment.

• 대한전자공학회논문지
• /
• 제24권6호
• /
• pp.1013-1019
• /
• 1987

This paper proposes the four directional line segmentation method to transform the size of dot patterns such as character dot patterns, line drawings and so on, while maintaining the quality of original pattern. At the first, this method extracts three kinds of line segmentm, namely horizontal, vertical line and slant line, and then transforms dot patterns using the each rules which are appricable to each kind of extracted line segments. Our experimental results show that transformation of dot patterns can be succeed in good quality without implementing some kinds of smoothing processes, covering the continuous transforming ratio of 0.5 to N times.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.918-920
• /
• 2011

본 논문에서는 이진화 결과 임펄스 노이즈 형태가 나타나는 영상에서 직선 성분을 검출할 때 사용되는 에지 패턴 분리 방법을 제안한다. 임펄스 노이즈가 발생하면 직선형태의 에지 패턴이 왜곡되어 복잡한 형태의 에지 형태가 된다. 왜곡된 상태에서 직선 검출 알고리즘을 적용하면 노이즈로 왜곡된 직선을 검출하지 못하기 때문에 전체 영상의 에지 성분을 방향성을 이용하여 분리하여야 한다. 본 논문에서는 4 방향에 대해서 에지 성분을 분리하였고, 분리한 각 영상에 대해서 겹쳐진 직선 패턴을 분리하여 직선을 검출하였다. 실험 결과는 제안하는 방법이 간단하면서도 정확하게 직선을 검출함을 보여준다.

• 전기학회논문지P
• /
• 제53권1호
• /
• pp.1-6
• /
• 2004

In this paper, we present the new method for joint aspect inspecting system. We use the image processing and laser maker for light source. We can find the matrial joint status through processing the line pattern which is made by laser maker. To get the line pattern, in first, we did the preprocess of threshold. If the shape of line had over two segments, then the joint status is abnormal. We show our system efficency by experiment on tire facility.

• International Journal of Quality Innovation
• /
• 제2권1호
• /
• pp.30-49
• /
• 2001

This paper considers a recent environment in the manufacturing process in which data in large amounts can be obtained on-line in real-time. Under this environment an on-line real-time Statistical Process Control (SPC) scheme equipped with detection of a process change, change-point estimation, and recognition of the change pattern is proposed. The proposed SPC scheme is composed of a Cusum chart, filtering methods and Akaike Information Criterion (AIC). We examine the performance of this scheme by Monte Carlo simulation and show its usefulness.

• 한국의류학회지
• /
• 제26권11호
• /
• pp.1502-1513
• /
• 2002

The purpose of this study was to find relations between construction factors and adaptability on the 5 available raglan sleeve patterns through the drafting method. Also it was to suggest a functional sleeve pattern according to appearance and adaptability test. Three women in her twenties who have standard figure was selected as subjects. Raglan sleeves of 5 experimental clothes were rated by the appearance test and adaptability test. The major conclusions of this study are as follows. 1. The construction factors of the raglan sleeve are sleeve slant, sleeve cap height, biceps line, breast width. Bicep lines increased and sleeve cap height decreased as the sleeve slant decreased. The higher adaptability scores of raglan sleeves were, the lower sleeve slants were. 2. According to the appearance evaluation, B type was recorded the highest score 3. According to the adaptability scores, A type was recorded the highest score. In the pulled length of the waist-line, A type was the lowest movements among the pattern type. In the pulled length of the sleeve-line, A type was the lowest movements among the pattern types. Therefore A type was evaluated by the bort functional sleeve pattern type. Through the experiments, it was known that appearance and adaptability of the raglan sleeve patterns were effected by construction factor.

• 한국공간구조학회논문집
• /
• 제12권1호
• /
• pp.109-119
• /
• 2012

막 구조물은 일반적인 설계와는 달리 형상해석, 응력변형해석 및 재단도 과정을 수행하여야만 설계가 가능하다. 처음 두 과정과는 달리 재단은 3차원 곡면을 최소 오차를 가진 평면 스트립을 형성하는 과정이다. 경제적인 이유로 재단 선은 주로 측지선을 이용하여 작성된다. 그러나 일반적으로 측지선은 초기 형상탐색에서 구성된 삼각형 요소의 정보에서 추출됨으로 부드러운 곡선이 아니며, 불규칙한 직선이다. 그러므로 어떻게 불규칙한 직선을 곡선으로 표현할 것인가가 중요하다. 따라서 본 연구에서는 스플라인 함수를 이용한 보간 방법을 재단도 생성에 적용하였다. 이를 위해서 삼차 스플라인 함수, B-스플라인 함수 및 최소자승 스플라인 함수의 세 가지 경우에 대해서 고찰하고, 단순 모델 및 카테나리 모델을 대상으로 재단도 작성 결과를 검토하였다. 단순모델의 해석요소수와 추출된 불연속 절점 수에 따른 보간 곡선 비교결과는 요소수가 큰 경우 추출된 절점의 수가 적은 것이 효과적이며, 최소자승 보간이 다른 방법보다 더 부드러운 재단 경계선을 제공한다.