• 한국의류산업학회지
• /
• 제6권4호
• /
• pp.497-502
• /
• 2004

The mechanical properties of jean slacks to the type of cutting lines in knee region and the bending time, after doing bending 0 times, 500 times, and 1500 times, the effects of whether or not cutting line, the fabric direction of the cutting area, and the number of cutting lines were investigated for tensile, shearing, compression, and mixing value of mechanical properties. The results are as follows: EM to bending times were larger in order of weft

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.627-643
• /
• 1995

The resistance to fracture of the restored tooth may be influenced by many factors, among these are the cavity dimension and the physical properties of the restorative material. The placement of direct composite resin restorations has generally been found to have a strengthening effect on the prepared teeth. It is the purpose of this investigation to study the relationship between the cavity isthmus and the fracture resistance of a tooth in composite resin restorations. In this study, MO cavity was prepared on the maxillary left first molar and then filled with composite resin. Three dimentional model with 3049 nodes and 2450 8-node blick elements was made by the serial photographic method and isthmus (1/4, 1/3, 1/2 and 2/3 of intercusplal distance between mesiobuccal cusp tip and mesiolingual cusp tip) was varied. Two types of model(B and R model) were developed. B model was assumed perfect bonding between the restoration and cavity wall and R model was left unfilled. A load of 1500N was applied vertically on the node from the lingual slope of the mesiobuccal cusp. The results were as follows : 1. There was a significant decrease of stress resulting in increase of fracture resistance in B model when compared with R model. 2. When it comes to stress distribution, the stress was concentrated in the facio-gingival line angle and the buccal side of the distal margin of the cavity in both Band R model. 3. With the increase of the isthmus width, the stress decreased in the area of the facio-gingival line angle, and increased in the area of facio-gingival line angle as well as the buccal side of the distal margin of the cavity in B model. In R model, the stress increased both in the area of facio-gingival line angle and the buccal side of the distal margin of the cavity, therefore the possibility of crack increased. 4. As the width of cavity increased, in B model, the direction of crack moved from horizontal to vertical on the facio-gingival line angle and the facio-pulpal line angle. In R model, the direction of the crack was horizontal on the facio-gingival line angle and moved from horizontal to the $45^{\circ}$ direction on the facio-pulpal line angle.

• Computers and Concrete
• /
• 제14권3호
• /
• pp.263-277
• /
• 2014

This study investigated four electric field configurations of two-dimensional accelerate lithium migration technique (ALMT), including line-to-line, plane-to-line, contour-to-line and plane-to-plane, and analyzed the ion migration behavior and efficiency. It was found that the free ion distribution diagram and voltage distribution diagram were similar, and ions migrated in the power line direction. The electrode modules were used for the mortar specimen with w/c ratio of 0.5. The effectively processed areas accounted for 14.1%, 39.0%, 49.4% and 51.4% of total area respectively on Day 28. Larger electrode area was more advantageous to ion migration. In addition, it was proved that the two-dimensional electric field could be divided into different equifield line active regions, and regarded as affected by one-dimensional electric field, and the ion migration results in various equifield line active regions were predicted by using the duration analysis method based on the theoretical model of ion migration obtained from one-dimensional test.

• 대한전자공학회논문지
• /
• 제24권6호
• /
• pp.1013-1019
• /
• 1987

This paper proposes the four directional line segmentation method to transform the size of dot patterns such as character dot patterns, line drawings and so on, while maintaining the quality of original pattern. At the first, this method extracts three kinds of line segmentm, namely horizontal, vertical line and slant line, and then transforms dot patterns using the each rules which are appricable to each kind of extracted line segments. Our experimental results show that transformation of dot patterns can be succeed in good quality without implementing some kinds of smoothing processes, covering the continuous transforming ratio of 0.5 to N times.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.302-307
• /
• 2004

When trains run over a snow-covered track at high speed, the snow accereted under car bodies may drop during train running. The dropped snow/ice lumps scatter the ballast on the track damaging the car body and the environment along the track in snowy regions. In this study, the snow-fall condition in winter around the Seoul-Busan high-speed line has been investigated to yield the countermeasure for the high-speed line. The climate near Japanese and French high-speed line as well as the relationship between the climate and countermeasure has also been investigated and the direction of countermeasure for Seoul-Busan high-speed line has been deduced. Consequently, the amount and frequency of snow-fall near Seoul-Busan high-speed line is less than that of Japan and France, so the speed restriction could be the fundamental countermeasure for Seoul-Busan high-speed line, and additional measure on rolling stock and infrastructure should be followed.

• 한국인터넷방송통신학회논문지
• /
• 제18권4호
• /
• pp.97-104
• /
• 2018

기존의 방향탐지는 지상에서 높은 위치에 안테나를 설치하여 신호 수신환경을 최대한 LOS(Line of Sight)의 환경으로 목표물의 위치를 탐지하지만 이러한 환경을 구성하기 위해선 높은 비용과 설치 시간이 필요하다. 군사적 용도로 사용되었던 무인항공기인 드론이 민간 상업용으로 시장이 확대되면서 활용 영역이 넓어지고 있기 때문에 본 논문에서는 방향탐지에서 드론을 활용하고자 TDOA(Time Difference of Arrival)기법을 활용하여 4대의 드론을 이용해 방향탐지 시뮬레이션을 구성하였다. 또한 추가적인 신호처리 테일러 급수와 Exact Iteractive Algorithm을 이용하여 드론과 TDOA 방향탐지 기법 기반의 시뮬레이션을 구성하였다. 시뮬레이션은 지상 방향탐지의 측정 데이터의 GPS정보를 이용하여 800MHz Path-Loss Model을 활용하여 수신 Power를 정의하였으며 TDOA기법과 테일러급수, Exact Iteractive Alogrithm을 적용하여 보정을 실시하였을 때 위치추정 성능을 분석하였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.287-290
• /
• 2000

In this paper we have presented approach to automatic the direction feature vectors detection, which detects the ridge line directly in gray scale images. In spite of a greater conceptual complexity, we have shown that our technique has less computational complexity than the complexity of the techniques which require binarization and thinning. Afterwards a various direction feature vectors is changed four direction feature vectors. In this paper used matching method is four direction feature vectors based matching. This four direction feature vectors consist feature patterns in fingerprint images. This feature patterns were used for identification of individuals inputed multilayer Neural Networks(NN) which has capability of excellent pattern identification.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1660-1663
• /
• 2005

Unwanted vibrations are inevitably induced in other directions when pure unidirectional vibration motion is desired for the vertical scratching mechanism. Pure vertical vibration motion of the scratching machine can be obtained by driving identical two motors with symmetrically positioned eccentric unbalance masses. The desired optimal condition for driving pure vertical vibration for the scratching machine is assumed to be the resonance condition in that direction. Imposing the flexibility of the scratching machine in the horizontal direction, we can find out the amount of horizontal vibration component while maintaining the resonance in vertical direction. The desired stiffness in horizontal direction which produces the minimum vibration in horizontal direction are defined which can be used as a guide line to design the supporting structure of the scratching machine.

• 한국군사과학기술학회지
• /
• 제10권2호
• /
• pp.170-179
• /
• 2007

This paper introduces the optimal disposition of direction finder using EM(Electro-magnetic) wave propagation analysis which is based on LR(Longley-Rice) propagation model and the characteristics of direction finder, emitter and terrain. Initial model is simulated and modified to minimize propagation error as a result of the field trials. Proposed analysis used line-of-sight analysis and mountain-top extraction algorithm to optimize the disposition in the assigned area and the result can be displayed in the 3D map in order of the percentage coverage for direction finding possibility area.

• 대한전자공학회논문지
• /
• 제27권3호
• /
• pp.116-123
• /
• 1990

3D computer vision에서 일치성 문제를 해결하기 위한 많은 논문이 epipolar line이 수평하다는 가정을 사용한다. 그러나 실제로 그러한 상황을 만들기에는 어려운 점이 있다. 본 논문은 epipolar line이 수평하지 않은 상태에서 적용할 수 있으며 line matching에 근거를 둔 binocular-stereo matching 알고리듬을 제안한다. 본 논문의 방법은 주어진 line segment 의 끝점에서의 epipolar line 들과 그점에서 maximum disparity에 의해서 결정되어지는 line searching window를 사용한다. 정합시에는 line segment들의 방향과 edge의 세기, cross-correlation들을 사용하였으며. 실험에 의해서 일치성 문제를 해결하기 위한 유용한 방법임을 알 수 있었다.