• Journal of Korean Society of Forest Science
• /
• v.42 no.1
• /
• pp.74-82
• /
• 1979

Pinus densiflora S. et Z. which has the widest distribution and highest stock at present in Korea and has used as materials for fuel, house construction, furniture and many other purposes for several hundred years, is considered as one of major species of economic importance, although there are a few epidemic insect injuries and silvicultural difficulties in regeneration. However, since disorderly cutting has been conducted for long time, the valuable local stands have disappeared. Therefore immediate attempts should be taken on the gene conservation and genetic studies including heritabilities and genetic gains of desirable characters. One hundred and twently five plus trees have so far been selected from the nationwide area and kept for the purpose of seed orchard establishment and other theoretical studies. In this study, the wind pollinated seeds of grafted stocks of 13 plus trees in clone bank located in Suweon and the seeds of 4 Japanese plus trees were collected and their progenies were used for heritability study. As indicated in figure 1, thirteen plus trees are from the middle part of Korea and two experimental plantations were laid out in ]972 (1-1 stock) by the randomized block design with five replications, consisting of 10 trees line plots of each family in each replication. Tree height, root collar diameter and branch diameter at 1cm apart from the main stem were measured. The results are summarized as follows 1. The rank of height growth of each plus tree progenies by age was greatly changed under age 3 and it was affected more in poor site than good site. 2. The heritabilities of height growth were estimated to be 7.2% at age 3, negative sign at age 4, 9.4% at age 5, 13.0% at age 6, 8.1% at age 7 and abrupt increase of 63.8% at age 8. The heritabilities were generally increased with increase of age. 3. The heritabilities of root collar diameter and branch diameter (average of the three biggest branches) was 3.2% and 11.8% at age 8 respectively. 4. The genetic gain was largest at age 8 and it was 46.6% when a selection intensity, 1/500 was taken. It, therefore, seems to be reasonable that selection should not be made under age 7.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1461-1464
• /
• 2019

In this paper, we propose the development of embedded board for integrated radiation exposure protection fireman's life-saving alarm capable of location tracking and radiation measurement. The proposed techniques consist of signal processing unit, communication unit, power unit, main control unit. Signal processing units apply shielding design, noise reduction technology and electromagnetic wave subtraction technology. The communication unit is designed to communicate using the wifi method. In the main control unit, power consumption is reduced to a minimum, and a high performance system is formed through small, high density and low heat generation. The proposed techniques are equipment operated by exposure to poor conditions, such as disaster and fire sites, so they are designed and manufactured for external appearance considering waterproof and thermal endurance. The proposed techniques were tested by an authorized testing agency to determine the effectiveness of embedded board. The waterproof grade has achieved the IP67 rating, which can maintain stable performance even when flooded with water at the disaster site due to the nature of the fireman's equipment. The operating temperature was measured in the range of -10℃ to 50℃ to cope with a wide range of environmental changes at the disaster site. The battery life was measured to be available 144 hours after a single charge to cope with emergency disasters such as a collapse accident. The maximum communication distance, including the PCB, was measured to operate at 54.2 meters, a range wider than the existing 50 meters, at a straight line with the command-and-control vehicle in the event of a disaster. Therefore, the effectiveness of embedded board for embedded board for integrated radiation exposure protection fireman's life-saving alarm has been demonstrated.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.2
• /
• pp.229-240
• /
• 1999

Background: The impact of the immune response on cancer gene therapy using viral vectors to deliver a "suicide gene" is currently unclear. A vigrous immune response targeted at viral proteins or transgene may enhance the efficacy of tumor destruction and even augment responses to tumor antigens. These responses may involve the release of cytokines and stimulation of tumor specific cytotoxic T-lymphocytes that enhance therapeutic efficacy. On the other hand, a vigorous rapid cellular immune response may destroy cells expressing the therapeutic gene and attenuate the response to therapy. Furthermore, development of neutralizing antibody responses may prevent readministration of virus, a potentially significant limitation. Evaluating the significance of these limitations in animal models and developing solutions are therefore of obvious importance. Methods: After retroviral transduction of mouse mesothelioma cell line(AB12) with Herpes Simplex Virus thymidine kinase (HSVtk) gene in vitro, subcutaneous flank tumors were established. To study the effect of intact immune system on efficacy of tumor erradication, the ability of the HSVtk/ganciclovir system to inhibit tumor growth was compared among normal Balb/c mice, immunodeficient Balb/c-nude and SCID mice, and Balb/c mice immunosuppressed with cyclosporin. Results: Ganciclovir treatment resulted in greater inhibition of tumor growth in Balb/c mice compared with immunodeficient Balb/c-nude mice and SCID mice(in immunodeficient mice, there were no growth inhibition by ganciclovir treatment). Ganciclovir treatment resulted in greater inhibition of tumor growth in noncyclosporin (CSA) treated Balb/c mice compared with CSA treated Balb/c mice. On day 8, mean ganciclovir-treated tumor volume were 65% of control tumor volume in Balb/c mice versus 77% control tumor volume in CSA-treated Balb/c mice. This effect was still evident during therapy (day 11 and 13). On day 13, non-CSA treated tumor volume was 35% of control tumor volume versus 60% of control tumor volume in CSA treated Balb/c mice. Duration of expression of HSVtk was not affected by the immunosuppression with CSA. Conclusion: These results indicate that the immune responses against retrovirally transduced cells enhance the efficacy of the HSVtk/ganciclovir system. These findings have important implications for clinical trials using currently available retrovirus vectors as well as for future vector design.

• Korean Journal of Poultry Science
• /
• v.17 no.4
• /
• pp.296-302
• /
• 1990

This study was conducted to investigate the interaction of aflatoxin B$_1$($AFB_1$) and vitamin D$_3$($VD_3$) in broiler chicks. The 336 broiler chicks(Hubbard line) of equally mixed sex were allocated to triplicate 8(2$\times$4 factorial) treatment groups. The 0 or 1ppm of AFB$_1$and 0, 500, 1,000 or 1,500IU/kg of VD$_3$ were supplemented to the basal diet Fourteen broilers of equally mixed sex were allocated to each replica and 24 groups were arranged in a randomized block design After 3 weeks of feeding the metatarsus were collected from the right and left legs of 4 chicks (2 for each sex) per group. The bone ash and minerals were measured. 1. In respect to the fresh weight of metatarsus bone no significant difference was found between 0 and 1ppm $AFB_1$ treatments, however, decreasing trend was recognized when fed increasing level of $VD_3$(P＜.01). 2. The ash content in non－fat dry metatarsus bone decreased when fed 1ppm $AFB_1$(P＜.01). However, that increased according to the increasing amount of $VD_3$(P＜.01). Although there was no interaction between $AFB_1$ and $VD_3$ it was shown that the 1500IU/kg of $VD_3$ was neccessary to cover the decrease in ash content of metatarsus. when fed 1ppm of $AFB_1$. 3. The Ca contents in metatarsus were not influenced by feeding $AFB_1$ but an increasing trend was verified by feeding increasing levels of $VD_3$(P＜.05). 4. The P content decreased as $AFB_1$ was fed(P＜.01), while no response was found when fed'different levels of $VD_3$ 5. The Cu content decreased when fed $AFB_1$(P＜.05). 6. The Na, Mg, K, Zn, Fe and Mn contents were not affected by feeding $AFB_1$ and /or $VD_3$.

• Proceedings of the Technology Innovation Conference
• /
• 1998.06a
• /
• pp.116-127
• /
• 1998

The Necessity of Cyber University. Within the rapidly changing environment of global economics, the environment of higher education in the universities, also, has been, encountering various changes. Popularization on higher education related to 1lifetime education system, putting emphasis on the productivity of education services and the acquisition of competitiveness through the market of open education, the breakdown of the ivory tower and the Multiversitization of universities, importance of obtaining information in the universities, and cooperation between domestic and oversea universities, industry and educational system must be acquired. Therefore, in order to adequately cope wi th these kinds of rapid changes in the education environment, operating Cyber University by utilizing various information technologies and its fixations such as Internet, E-mail, CD-ROMs, Interact ive Video Networks (Video Conferencing, Video on Demand), TV, Cable etc., which has no time or location limitation, is needed. Using informal ion and telecommunication technologies, especially the Internet is expected to Or ing about many changes in the social, economics and educational area. Among the many changes scholars have predicted, the development and fixations of Distant Learning or Cyber University was the most dominant factor. In the case of U. S. A., Cyber University has already been established and in under operation by the Federate Governments of 13 states. Any other universities (around 500 universities has been opened until1 now), with the help of the government and private citizens have been able to partly operate the Cyber University and is planning on enlarging step-by-step in the future. It could be seen not only as U. S. A. trying to elevate its higher education through their leading information technologies, but also could be seen as their objective in putting efforts on subordinating the culture of the education worldwide. UTRA University in U. S. A., for example, is already exporting its class lectures to China, and Indonesia regions. Influenced by the Cyber University current in the U.S., the Universities in Korea is willing .to arrange various forms of Cyber Universities. In line with this, at JUNAM National University, internet based Cyber University, which has set about its work on July of 1997, is in the state of operating about 100 Cyber Universities. Also, in the case of Hanam University, the Distant Learning classes are at its final stage of being established; this is a link in the rapid speed project of setting an example by the Korean Government. In addition, the department of education has selected 5 universities, including Seoul Cyber Design University for experimentation and is in the stage of strategic operation. Over 100 universities in Korea are speeding up its preparation for operating Cyber University. This form of Distant Learning goes beyond the walls of universities and is in the trend of being diffused in business areas or in various training programs of financial organizations and more. Here, in the hope that this material would some what be of help to other Universities which are preparing for Cyber University, I would 1ike to introduce some general concepts of the components forming Cyber University and Open Education System which has been established by JUNAM University. System of Cyber University could be seen as a general solution offered by tile computer technologies for the management on the students, Lectures On Demand, real hour based and satellite classes, media product ion lab for the production of the multimedia Contents, electronic library, the Groupware enabling exchange of information between students and professors. Arranging general concepts of components in the aspect of Cyber University and Open Education, it would be expressed in the form of the establishment of Cyber University and the service of Open Education as can be seen in the diagram below.

• Radiation Oncology Journal
• /
• v.28 no.3
• /
• pp.177-183
• /
• 2010

Purpose: Simulation using computed tomography (CT) is now widely available for radiation treatment planning for breast cancer. It is an important tool to help define the tumor target and normal tissue based on anatomical features of an individual patient. In Korea, most patients have small sized breasts and the purpose of this study was to review the margin of treatment field between conventional two-dimensional (2D) planning and CT based three-dimensional (3D) planning in patients with small breasts. Materials and Methods: Twenty-five consecutive patients with early breast cancer undergoing breast conservation therapy were selected. All patients underwent 3D CT based planning with a conventional breast tangential field design. In 2D planning, the treatment field margins were determined by palpation of the breast parenchyma (In general, the superior: base of the clavicle, medial: midline, lateral: mid - axillary line, and inferior margin: 2 m below the inframammary fold). In 3D planning, the clinical target volume (CTV) ought to comprise all glandular breast tissue, and the PTV was obtained by adding a 3D margin of 1 cm around the CTV except in the skin direction. The difference in the treatment field margin and equivalent field size between 2D and 3D planning were evaluated. The association between radiation field margins and factors such as body mass index, menopause status, and bra size was determined. Lung volume and heart volume were examined on the basis of the prescribed breast radiation dose and 3D dose distribution. Results: The margins of the treatment field were smaller in the 3D planning except for two patients. The superior margin was especially variable (average, 2.5 cm; range, -2.5 to 4.5 cm; SD, 1.85). The margin of these targets did not vary equally across BMI class, menopause status, or bra size. The average irradiated lung volume was significantly lower for 3D planning. The average irradiated heart volume did not decrease significantly. Conclusion: The use of 3D CT based planning reduced the radiation field in early breast cancer patients with small breasts in relation to conventional planning. Though a coherent definition of the breast is needed, CT-based planning generated the better plan in terms of reducing the irradiation volume of normal tissue. Moreover it was possible that 3D CT based planning showed better CTV coverage including postoperative change.

• Journal of Science of Art and Design
• /
• v.7
• /
• pp.5-63
• /
• 2005

Generally, the meanings of destruction are related in the meaning of demolition, breakdown, into fragments ... and so on, and the similar meanings are twist, crush, demolish, split, cut, into pieces , break up ... etc. Further, it has related in the cruelty and destructive heart which are linked with orgy, Sadism, Necrophilia and so on. The meanings are also expressed by the initial , which are deprivation, deface, defame, deform, degrade, delegitimize, denounce , deride, destroy, devalue, as well as debase, debunk, declaim, declassify, decry, delete, denigrate, deprecate, despise or detract ...and so on. Dario Gamboni has discussed the meaning in his book as two categories Iconoclasm and Vandalism. And the similar meanings could be found in the words which has the initial of , like abase, abate, abhor, abjure, abolish, abridge, abuse ...and so on. Even though the distinct meanings of Iconoclasm and Vandalism, it is not easy to distinguish clearly between the differences when the results are accomplished in contemporary paintings because of the similarity of the results. In korean vocabulary there are no similar words to distinguish between the meanings of destruction and deconstruction, and the deconstruction is not recorded in the general dictionaries. However the meaning of is diminishing, separation, contrast and so on. So the unification of the word as do-construction is not construct, minus construction, reverse construction. And Vincent Ditch explained that there are the meaning of destroy the text. From Jacques Derrida, the deconstruction strategy is to criticise the world of traditional metaphysics and logocentrism, and not to reconstruire the philosophical meaning of texts but $d\'{e}construire$ them. And Saussure emphasized that the signifers could have more meaning that there can be more signified in traditional texts in the art. as a result, deconstruction is explained that there are many signified meanings in a signifer. In this thesis , from using the meanings of destruction and deconstruction, to distinguish the expressive skills in contemporary art works are arising. Therefore, special methods which are linked in the destruction styles are selected. As a result, the two different purposes of destruction is arising, one is enmity destruction and the other is self destruction another word, auto destruction or destruction to create The enmity destruction can be distinguished by the two category Iconoclasm and Vandalism. They come from the moment of different historical aspect is arising and want to attack the Icon or masterpiece this concept is from the study of John Philips and especially iconoclasm is linked with religious and artistic heart, but Vandalism is come from the political attack. Sometime, this distinguish is not clearly arising, because the two aspects are co-related in the attack. As a result, firstly, the Iconoclastic controversy had arisen in the methods of Dadaism which has developed by Man Ray, Francis Picabia and Marcel Duchamp. They want to attack the pre-established master-pieces and painting spaces, and they had 'non-artistic attitude' not to be art. Since 1980, the German artist Anselm Kiefer adapted the methods and made them his special skills so he had tried to paint tough brush strokes and draw with hugh pallette image line and fire and water images , they can be the image attack as the Iconoclasm. secondly, the model of vandalism is to be done by hammer, drill, canon and so on. the method is to attack the content of painting. Further, the object of destruction is bound by cords and iron lings to demolish or to declare the authority of pre-statues; it symbolize the pre-authority is gone already. Self-destruction based paintings are clearly different in the purpose of approaching the art work. First of all, they can be auto-destruction, creative destruction and metamorphosis destruction, which is linked with the skill the material aspect and basic stature, and sign destruction or signifier destruction, which is link with the inner meaning destruction that is considered as the Semiotical destruction in post-modern paintings. Since 1960, the auto destruction is based on the method of firing, melting, grinding and similar skills, which is linked with Neo-Dada and reverse-assemblage. Metamorphosis destruction is strongly linked with the basic inner heart price and quality, so it can be resulted in the changedness of expectation and recognition. Tony Cragg has developed the skills to metamorphose the wood as stone or iron as cloth and stone as sponge and rubber and so on. The researcher has developed the same style in the series of since 2003. The other self-destructive methods are found in the skill of sign destruction. In the methods the meaning of the art is not fixed as one or two, but is developed multi-meaning and differ from original starting situation, so Jacques Derrida called the difference meaning in deconstruction. It is the destruction of textes. These methods are accomplished by David Salle, Francesco Clemente, and recently Tracy Emin, who has developed the attacking heart in the spectators' emotion. Sometime in the method of self-destruction, it is based on horror and shock, the method is explored by Demian Hirst and Jakes and Dinos Chapman. Their destructive styles stimulate ambivalent heart and destroy original sign of girl and animals.

• Asia pacific journal of information systems
• /
• v.19 no.2
• /
• pp.43-72
• /
• 2009

Recently, user-created content (UCC) have emerged as popular medium of on-line participation among users. The Internet environment has been constantly evolving, attracting active participation and information sharing among common users. This tendency is a significant deviation from the earlier Internet use as an one-way information channel through which users passively received information or contents from contents providers. Thanks to UCCs online users can now more freely generate and exchange contents; therefore, identifying the critical factors that affect content-generating activities has increasingly become an important issue. This paper proposes a set of critical factors for stimulating contents generation and sharing activities by Internet users. These factors were derived from the theories of folklores such as tales and songs. Based on some shared traits of folklores and UCC content, we found four critical elements which should be heeded in constructing UCC contents, which are: context of culture, context of situation, skill of generator, and response of audience. In addition, we selected three major UCC websites: a specialized contents portal, a general internet portal, and an official contents service site, They have different use environments, user interfaces, and service policies, To identify critical factors for generating, sharing and transferring UCC, we traced user activities, interactions and flows of content in the three UCC websites. Moreover, we conducted extensive interviews with users and operators as well as policy makers in each site. Based on qualitative and quantitative analyses of the data, this research identifies nine critical factors that facilitate contents generation and sharing activities among users. In the context of culture, we suggest voluntary community norms, proactive use of copyrights, strong user relationships, and a fair monetary reward system as critical elements in facilitating the process of contents generation and sharing activities. Norms which were established by users themselves regulate user behavior and influence content format. Strong relationships of users stimulate content generation activities by enhancing collaborative content generation. Particularly, users generate contents through collaboration with others, based on their enhanced relationship and specialized skills. They send and receive contents by leaving messages on website or blogs, using instant messenger or SMS. It is an interesting and important phenomenon, because the quality of contents can be constantly improved and revised, depending on the specialized abilities of those engaged in a particular content. In this process, the reward system is an essential driving factor. Yet, monetary reward should be considered only after some fair criterion is established. In terms of the context of the situation, the quality of contents uploading system was proposed to have strong influence on the content generating activities. Among other influential factors on contents generation activities are generators' specialized skills and involvement of the users were proposed. In addition, the audience response, especially effective development of shared interests as well as feedback, was suggested to have significant influence on contents generation activities. Content generators usually reflect the shared interest of others. Shared interest is a distinct characteristic of UCC and observed in all the three websites, in which common interest is formed by the "threads" embedded with content. Through such threads of information and contents users discuss and share ideas while continuously extending and updating shared contents in the process. Evidently, UCC is a new paradigm representing the next generation of the Internet. In order to fully utilize this innovative paradigm, we need to understand how users take advantage of this medium in generating contents, and what affects their content generation activities. Based on these findings, UCC service providers should design their websites as common playground where users freely interact and share their common interests. As such this paper makes an important first step to gaining better understand about this new communication paradigm created by UCC.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.245-252
• /
• 2004

Experiment was carried out to find the fertilizing effects of 8 different application rates of swine compost fermented with sawdust(SCS) including Chemical fertilizer(CF) on forage yield and soil chemical characteristics of mixed pastures sown in Sep. 1993 at National Livestock Research Institute, RDA., in Suwon during low years. It was arranged in a randomized complete block design with three replicates. Dry matter yield were shown at similar among treatments except Control and $50\%$ SCS of standard amount plot. In botanical composition, the legume and weeds percentages of each treatment were increased as advancing year. The final year's legume percentage were high in line with SCS fertilizing plots($39\%{\sim}43\%$), SCS + CF plots($30\%{\sim}41\%$) and CF plot($32\%$). In productions of TDN, NE and crude protein yield, SCS or SCS($75\%$) + CF($25\%$) were nearly same comparing those of CF, respectively. Phosphate, potassium, magnesium contents and K/(Ca + Mg) except calcium contents of those SCS fertilizing plots in plant were generally high with comparing CF. Those contents were proportional according to the fertilizing amount These result indicate the possibility to substitute chemical fertilizer for SCS($75\%$, 25ton/ha) + CF, $25\%$) as manure-N 210 kg/ha, but might be considered accumulation phosphate in the soil.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.3-36
• /
• 2015

As of end of 2014, the population engaging in aviation activities for leisure has reached approximately 13 million, where approximately 356 cases involve a general aircraft, 200 cases involve light aircraft, and 636 cases involve an ULM. The industry for leisure has become a very promising industry in line with rapidly rising living standards which are expected to further increase in the future. The demand for such services is expected to increase over time. The purpose of this paper is to review the development and site selection of airfields in anticipation of these developments in the industry. While the government also has experience in the review of airfield location and candidate sites, it is not the government that carries out the actual construction. As such, the feasibility of the site needs to be verified in terms of actual construction. This study identified factors for Site Selection of factors through a review of related documents and existing research reports. A questionnaire was also used to collect the views of experts in the field, which was then analyzed. The Research model was confirmed in the layered form for an AHP analysis. The factors for Site Selection were identified as the technical / operational factors and economic / political elements for a two-stage configuration. The third step consisted of technical and operational elements. The final step is was constructed a total of 11 elements (weather, surface conditions, obstacle limitation surface, airspace conditions, operating procedures, noise problems, environmental issues, availability of facilities, construction and investment costs, contribution to the local economy, accessibility, demand / the proximity of demand). The surveys are conducted for more than 10 General and light aircraft pilots, professionals, and instructor. The analysis results showed a higher level in the technical / operating elements (73.2%) in the first step, while the next step sawa higher level of the operational elements (30.9%) than the other. The factors for Site Selection were any particular elements did not appear high, the weather conditions (17.5%), noise problems (19.8%), the proximity of demand (6%), accessibility (5.7%), environmental issues (11.1%), availability of facilities (8%), airspace conditions (7.9%), obstacle limitation surface (12%), construction and investment costs (4.2%) and to operating procedures (4.9%), contribution to the local economy (3.8%).