• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2171-2176
• /
• 2007

The 3-omega (3-${\omega}$) method is utilized to measure the thermal conductivity of nanofluids. A metal line heater on a silicon nitride membrane bridge structure is microfabricated by a bulk silicon etching method. Localized measurement of the thermal conductivity within the nanofluids droplet is possible by the fabricated 3-${\omega}$ sensor. Time varying AC temperature amplitudes and thermal conductivities are measured to check the stability of the nanofluids containing multi-wall carbon nanotubes (MWCNTs). Stabilities of MWCNT nanofluids prepared with different chemical treatments are compared. Acid treated MWCNT showed best dispersion stability in water while MWCNTs dispersed in water with surfactants such as Gum Arabic and Sodium dodecyl benzene sulfate showed clear sign of gravity dependence.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.680-695
• /
• 1998

The objective of this study is to optimize the responses of the creep feed ceramic grinding process simultaneously by an off-1ine multicriteria optimization methodology. The responses considered as objectives are material removal rate, flexural strength, normal grinding force, workpiece surface roughness and grinder power. Alumina material was ground by the creep feed grinding mode using superabrasive grinding wheels. The process variables optimized for the above objectives include grinding wheel specification, such as bond type, mesh size, and grit concentration, and grinding process parameters, such as depth of cut and feed rate. A weighting method transforms the multi-objective problem into a single-objective programming format and then, by parametric variation of weights, the set of non-dominated optimum solutions are obtained. Finally, the multi-objective optimization methodology was tested by a sensitivity analysis to check the stability of the model.

• Journal of the Korean Home Economics Association
• /
• v.40 no.8
• /
• pp.167-182
• /
• 2002

The purpose of this study is to observe the meaning of Minimalism and the characteristics in modem fashion design. The Minimalism appeared in 1960's has affect on fashion design which are simple miniskirt or Courrage look of those days. It leads a fashion system to the simple style goes with the life style of modem persons although the characteristics are somewhat different the styles in 1960's with those of 1990's. Minimal style is not just simple style but abbriviate expression constrained at the minimum. The styles appeared to be an undecorated simple line which are a sleeveless onepiece, a simple suit with no pocket and no collar and narrow shoulder. Colors are monochrome coordination and pursue a simplicity which is monotone variation. Patterns also appeared to be a geometric or abstract pattern for example check and stripe, which intend to minimum expression. Matirials are hightech glossy coating textures which have a futuristic image. In conclusion, the Minimalism in 1990's appeared to be a post-minimalism associated with postmodernism and a hightech-minimal under the technology development.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.05a
• /
• pp.125-130
• /
• 2001

We evaluated structured web site contents construct method. The method for construction web contents was considered. The construction procedure is as follows. Elicit "user requirement" and the web management side needs. Mark a check where each line and row corresponds to clarify the relation between both in the matrix by which user requirements and the purposes are arranged in lines and rows. To understand the systematic feature of the web site itself, "grasping information" and "structuring" are necessary. We actually constructed web site contents of a theatrical company using this method. and we got the construction of existing web site contents of another theatrical company. We compared our constructed web site contents with the existing web site contents. Finally, we evaluated this method and testified that this method is useful.

• 한국IT서비스학회:학술대회논문집
• /
• 2008.11a
• /
• pp.246-249
• /
• 2008

본 연구는 기존의 셀 생산라인에서 관리자가 직접 체크하기 힘들었던 부분인 표준작업시간의 측정을 USN ( Ubiquitous Sensor Network ) 환경을 통해서 측정하여 셀 생산라인의 표준작업시간 측정 방법을 개선하는 것이 목적이다. 측정 방법의 개선 방안으로는 셀 생산라인 내 Sensor Network 및 웹 기반 관리 시스템을 도입하는 것이다. 이 시스템은 USN 환경을 통해서 작업시간을 측정하고 측정된 데이터는 서버로 전송되어 관리자는 웹을 통해 확인, 관리 하는 시스템이다. 본 연구를 통해서 작업시간 및 불량품 데이터를 실시간으로 확인하는 시스템 체계를 구축할 수 있었다. 이를 통해서 생산 관리 부분에 정보 시스템을 도입하여 관리 수준을 향상 시킬 수 있을 것이다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.118-126
• /
• 2003

Digital Manufacturing is a technology facilitating effective developments and agile productions of the product via digital computer models representing physical and logical schema and the behavior of the real manufacturing systems including manufacturing resources, environments and products. For the successful application of this technology, a digital factory as a well-designed and an integrated environment is essential. In this paper, we constructed the sophisticated digital factory of a Korean automotive company's body shop, and conducted precise simulations of unit cell, lines and the whole factory for the collision check, the production flow analysis and the off-line programming. We expect that this digital factory of the body shop helps us achieve great savings in time and cost for many manufacturing preparation activities of the new car development.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.2
• /
• pp.201-205
• /
• 2004

During the routine survey, the mortality of mulberry seedlings was noticed due to damping-off disease. The disease recognized by rotting of emerged seedlings near the soil line (just below the soil level) resulting in collapse of the seedlings. Two fungi were isolated from affected samples and identified as Alternaria alternata (Fr.) Keissler and Fusarium solani (Mart.) Sacc. Both the fungi were found to be responsible in causing pre and post emergence damping-off of seedlings in mulberry. For management of the disease, an experiment was conducted using fungicides. These fungicides were applied as seed treatment; soil drenching and foliar spray alone and in combination. Among the different treatments, integration of seed treatment and soil application of Dithane M-45 (Mancozeb 75% WP) + Bavistin (Carbendazim 50% WP) followed by foliar spray of these fungicides (after 35 days of sowing) resulted in better survivability of seedlings (93.3 %) on $90^th$ day and controlled the pre and post emergence damping off by 100 and 89.5%, respectively over the check.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.2
• /
• pp.54-59
• /
• 2010

The flight deck crew must manage complexity during daily flight operations. The Airline may obtain data regarding threats and errors through LOSA(Line Operations Safety Audits) on normal flights as predictive safety tool in Safety Management System of the Airline to actively improve the systems such as SOP(Standard Operation Procedure), training, evaluation and the TEM(Threat and Error Management) for the flight deck crew. The flight deck crew make errors when they fail managing threats. The crew mismanage around ten percent of threats and commit errors. The major mismanaged threats are aircraft malfunction, ATC(Air Traffic Communication), and wether threats. The effective countermeasures of TEM for manageing threats are leadership, workload management, monitor & cross check, Vigilance, communication environment and cooperation of the crew. It is important that organizations must monitor for the hazards of threats and improve system for the safer TEM environments.

• IE interfaces
• /
• v.15 no.4
• /
• pp.356-363
• /
• 2002

Virtual Manufacturing is a technology to facilitate effective product development and agile production by computer models representing the physical and logical schema and the behavior of real manufacturing systems including manufacturing resources, environments and products. For the successful application of this technology, a virtual factory as a well-designed and integrated environment is essential. In this research, we constructed a sophisticated virtual factory model of an automotive company's paint shop, and performed precise simulations of unit cells, lines and whole plant operations for collision check and off-line programming. It is expected that this virtual paint shop is useful for achieving time and cost savings in many manufacturing preparation and planning activities of new car development processes.

• Journal of Multimedia Information System
• /
• v.5 no.3
• /
• pp.179-188
• /
• 2018

In order to overcome the problems of contact palmprint recognition, a non-contact palmprint recognition system is developed on personal computer (PC) platform. Three methods, namely "double-line-single-point" (DLSP), "double-assistant-crosshair" (DAC) and "none-assistant-graphic" (NAG), are implemented for the palmprint localization to solve the severe technical challenges, including the complex background, variant illuminations, uncontrollable locations and gestures of hands. In NAG, hand segmentation and the cropping of region of interest are performed without any assistant graphics. The convex hull contour of hand helps detect the outside contour of little finger as well as the valley bottom between thumb and index finger. The three methods of palmprint localization have good operating efficiency and can meet the performance requirements of real-time system. Furthermore, an attendance system on PC platform is designed and developed based on non-contact palmprint recognition.