• 한국안전학회지
• /
• 제17권4호
• /
• pp.146-152
• /
• 2002

The steel shows plastic deformation after the yield point exceeds. Because of overloads, the plastic deformation occurs at the interior support of a continuous bridge. The plastic deformation is concentrated at the interior support, and the permanence deformation at the interior support remains after loads pass. Because local yielding causes the positive moment at the interior support, it is called "auto moment". Auto moment redistributes the elastic moment. Because of redistribution, auto moment decreases the negative moment at the interior support of a continuous bridge. In this paper, the moment-rotation curve from Schalling is used. The Plastic rotation is computed by using Beam-line method, and auto moment is calculated based on the experiment curve. The design example is presented using limit state criterion.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.59-61
• /
• 2002

This research investigates electron beam to specification energy to Module that was generalized and schematized difference of curved line after existing V-I efficiency characteristic curve and irradiation. And will analyze cause of Si crystal Solar cell's efficiency addition and subtraction by 80keV electron beam investigation.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.309-314
• /
• 1999

The major movement block of the containers is range between apron and designation points on yard in container terminal. The yard tractor operated by human takes charge of it's movement in conventional container terminal. In unmanned container terminal, UCT(unmanned container transporter) has charge of the yard tractor's role and the navigation path is ordered from upper level control system. The unmanned container terminal facilities must have docking system that guided landing line to have high speed travelling and precision positioning in unmanned container terminal. The general method for docking uses the vision system with CCD camera, infra red, and laser. This paper describes the investigation for the developed docking method in view point of merit and demerit and introduces 속 result of developing the docking system with LSB(laser slit beam).

• Structural Engineering and Mechanics
• /
• 제17권6호
• /
• pp.829-862
• /
• 2004

This paper presents a method for the nonlinear analysis of beam elements subjected to the cyclical combined actions of torsion, biaxial flexure and axial forces based on an extension of the disturbed compression field (DSFM). The theoretical model is based on a hybrid formulation between the full rotation of the cracks model and the fixed direction of the cracking model. The described formulation, which treats cracked concrete as an orthotropic material, includes a new approach for the evaluation of the re-orientation of both the compression field and the deformation field by removing the restriction of their coincidence. A new equation of congruence permits evaluating the deformation of the middle line. The problem consists in the solution of coupled nonlinear simultaneous equations expressing equilibrium, congruence and the constitutive laws. The proposed method makes it possible to determine the deformations of the beam element according to the external stresses applied.

• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.41-46
• /
• 2022

This study is a Ku-band array antenna for the manufacture of low-orbit satellite communication terminals, designed to have miniaturization, high gain, and wide beam width. The transmission of low-orbit satellite communication has a right-rotating circularly polarized wave, and the reception has a left-rotating circularly polarized wave. The 4×8 array antenna was separated for transmission and reception, and it was combined with the RF circuit part of the transmitter and receiver, and was terminated in the form of a waveguide for RF signal impedance matching in the form of a transition from the microstrip line to the waveguide. The 30° beam width of the receiver maximum gain of 19 dBi and the 29° beam width of the transmitter maximum gain of 18 dBi are shown. Through this antenna configuration, the system was configured to suit the low-orbit satellite transmission/reception characteristics.

• 한국전자파학회논문지
• /
• 제12권5호
• /
• pp.795-801
• /
• 2001

본 논문은 브랜치 선로 결합기를 소형화하는 방법에 대해 기술하였다. 이 방법은 덮개층이 있는 선로를 이용한 방법이다. 덮개층이 있는 선로의 주파수 변화에 따른 특성(분산 및 특성임피던스)을 해석하기 위해 스펙트럴 영역에서의 Immittance 방법과 선분할법(Method of Line)을 이용하였다. 덮개층이 있는 선로에 관한 스펙트럴 영역에서의 Green 함수를 구하고 이를 이용하여 수치적인 결과를 얻었다. 이 결과를 이용하여 덮개층을 갖는 브랜치 선로 하이브리드를 중심주파수 2 GHz에서 설계하고 제작하였다. 실험 결과 유전율 10.2dls 덮개층을 갖는 경우 기존 단일 마이크로스트립 선로로 구현된 결합기보다 31.4% 크기가 줄어들었음을 확인할 수 있었다. 이 방법은 앞으로 이동통신 빔형성 안테나의 급전선인 Butler Matrix의 크기를 줄이는 방법으로 사용 가능하리라 사료된다.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.972-980
• /
• 2010

In this study, we introduce the design methodology of an optimized type-2 fuzzy cascade controller with the aid of hierarchical fair competition-based genetic algorithm(HFCGA) for ball & beam system. The ball & beam system consists of servo motor, beam and ball, and remains mutually connected in line in itself. The ball & beam system determines the position of ball through the control of a servo motor. Consequently the displacement change of the position of the moving ball and its ensuing change of the angle of the beam results in the change of the position angle of a servo motor. The type-2 fuzzy cascade controller scheme consists of the outer controller and the inner controller as two cascaded fuzzy controllers. In type-2 fuzzy logic controller(FLC) as the expanded type of type-1 fuzzy logic controller(FLC), we can effectively improve the control characteristic by using the footprint of uncertainty(FOU) of membership function. The control parameters(scaling factors) of each fuzzy controller using HFCGA which is a kind of parallel genetic algorithms(PGAs). HFCGA helps alleviate the premature convergence being generated in conventional genetic algorithms(GAs). We estimated controller characteristic parameters of optimized type-2 fuzzy cascade controller applied ball & beam system such as maximum overshoot, delay time, rise time, settling time and steady-state error. For a detailed comparative analysis from the viewpoint of the performance results and the design methodology, the proposed method for the ball & beam system which is realized by the fuzzy cascade controller based on HFCGA, is presented in comparison with the conventional PD cascade controller based on serial genetic algorithms.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.257-264
• /
• 2007

MM22 마이크로트론은 1986년도 11월부터 2006년 2월까지 암 환자를 위한 방사선 치료 장비로 사용되었다. 장비의 노후로 치료 장비에서 연구 및 교육용으로 전환하기 위해 방사선의학연구센터로 이전 설치하였다. 본 논문에서는 이전 설치 한 후 빔 인출을 수행하기 위해 마이크로트론의 동작원리, 시스템을 구성하는 각 장치의 특성을 분석하여 보았고 주요 부분의 파라메타인 펄스구조의 특징을 살펴보았다. 실제, 각 주요 시스템의 펄스를 측정하였고 빔 인출부, 빔 라인 및 최종단인 타겟에서 빔 인출 기법을 통하여 빔 인출 및 빔 측정을 수행하였다. 이전 설치 후 10 MV X-선의 경우 최종 단 치료기에서 30 mA 타겟 전류를 인출하였고, 필름을 SSD 100 cm, $10{\times}10cm^2$ 조사면에 놓고 100 MU 방사선을 조사하였다. 조사면의 방사선분포의 평탄도 측정 결과 3%이내로 안정적인 빔을 인출하여 이전설치가 성공적으로 수행되었음을 확인할 수 있었다.

• 한국정보통신학회논문지
• /
• 제19권11호
• /
• pp.2689-2696
• /
• 2015

방사선 진단에 사용되는 방사성동위원소 중 사이클로트론을 이용해 생산되는 방사성동위원소는 사이클로트론에서 인출된 양성자 빔이 타겟에 조사될 때 빔의 크기와 모양, 조사되는 위치에서 빔 균일 정도에 따라 생산 수율에 영향을 받는다. 이에 본 논문에서는 사이클로트론 빔 라인에서 빔의 단면을 측정할 수 있는 BPM(Beam Profile Monitor)장치를 개발하였다. LabView로 BPM장치를 원격 제어할 수 있도록 구성하였으며 BPM 프로그램을 이용하여 X축과 Y축으로 텅스텐 와이어를 스캔하면서 얻은 빔의 수치 정보를 2차원 그래프와 3차원 빔 분포 그래프로 표시하여 해석을 쉽게 모니터링 할 수 있도록 하였다. 빔을 측정하는 데 걸리는 시간은 스텝 모터 구동 속도가 2000pps일 때 37초가 걸린다는 것을 확인 할 수 있었다. 측정된 빔 분포정보를 기반으로 빔 재조정을 통해 빔 분포를 최적화함으로써 방사성동위원소 생산 수율을 극대화 시킬 수 있고 공급 안정화에도 기여하리라 본다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권1호
• /
• pp.11-16
• /
• 2014

Objectives: The aim of this study was to evaluate the pattern of lingual split line when performing a bilateral sagittal split osteotomy (BSSO) for asymmetric prognathism. This was accomplished with the use of cone-beam computed tomography (CBCT) and three-dimensional (3D) software program. Materials and Methods: The study group was comprised of 40 patients (20 males and 20 females) with asymmetric prognathism, who underwent BSSO (80 splits; n=80) from January 2012 through June 2013. We observed the pattern of lingual split line using CBCT data and image analysis program. The deviated side was compared to the contralateral side in each patient. To analyze the contributing factors to the split pattern, we observed the position of the lateral cortical bone cut end and measured the thickness of the ramus that surrounds the mandibular lingula. Results: The lingual split patterns were classified into five types. The true "Hunsuck" line was 60.00% (n=48), and the bad split was 7.50% (n=6). Ramal thickness surrounding the lingual was $5.55{\pm}1.07$ mm (deviated) and $5.66{\pm}1.34$ mm (contralateral) (P =0.409). The position of the lateral cortical bone cut end was classified into three types: A, lingual; B, inferior; C, buccal. Type A comprised 66.25% (n=53), Type B comprised 22.50% (n=18), and Type C comprised 11.25% (n=9). Conclusion: In asymmetric prognathism patients, there were no differences in the ramal thickness between the deviated side and the contralateral side. Furthermore, no differences were found in the lingual split pattern. The lingual split pattern correlated with the position of the lateral cortical bone cut end. In addition, the 3D-CT reformation was a useful tool for evaluating the surgical results of BSSO of the mandible.