• Journal of Astronomy and Space Sciences
• /
• 제11권2호
• /
• pp.232-249
• /
• 1994

Since we finished the purchase of the cooled Schottky diode mixer receiver made by Radiometer Physics Co. for the 120-170GHz range in October 1991, we have not prepared the PPL hardware and software for this receiver and the ellipsolidal mirror for beam guiding. After these problems were solved, this receiver was installed at the 14m telescope in late December 1993, and used for the confirmation of a spectral line detection and the measurement of the beam efficiency. The beam efficiency is about 36% at 146 GHz.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.892-898
• /
• 2013

A field emission projection microscope was constructed to investigate the atomic and chemical-bonding structure of molecules using electron in-line holography. Fringes of carbon nanotube images were found to be interferograms equivalent to those created by the electron biprism in conventional electron microscopy. By exploiting carbon nanotubes as the filament of the electron biprism, we measured the transverse coherence length of the electron beam from tungsten field emitters. The measurements revealed that a partially coherent electron-beam was emitted from a finite area.

• 한국광학회지
• /
• 제5권4호
• /
• pp.453-456
• /
• 1994

Variations in the amplitude and phase distributions of an incident Gaussian beam are derived analytically when it propagates through a photorefractive crystal in the presence of another strong beam and resulting photorefractive grating that is phase shifted by other than 90.deg. relative to the intensity grating. In the presence of the photorefractive grating the beam is shown to propagate along a straight line in a new direction with an increased wave number.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권4호
• /
• pp.50-55
• /
• 2007

Stereolithography (SLA) is a technique using a laser beam to cure a photopolymer liquid resin with three-dimensional computer-aided design (CAD) data, The accuracy of the prototype, the build time, and the cured properties of the resins are controlled by the SLA process parameters such as the size of the laser beam, scan velocity, hatch spacing, and layer thickness, In particular, the size of the laser beam is the most important parameter in SLA, This study investigated the curing properties of photopolymers as a function of the laser beam size, The cure width and depth were measured either on a single cure line or at a single cure layer for various hatch spacings and laser beam sizes, The cure depth ranged from 0.23 to 0.34 mm and was directly proportional to the beam radius, whereas the cure width ranged from 0.42 to 1.07 mm and was inversely proportional to the beam radius, The resulting surface roughness ranged from 1.12 to $2.23{\mu}m$ for a ratio of hatch spacing to beam radius in the range 0.5-2.0 at a beam radius of 0.17 mm and a scan velocity of 125 mm/sec.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1416-1422
• /
• 2010

모노레일은 그동안 과좌식과 현수식으로 분류 되어 왔으나 세계 최초로 도입한 중앙 안내 방식의 인천 월미은하레일은 신개념의 Y Beam을 가이드 레일로 사용한 새로운 형식의 모노레일이라 할 수 있다. Y Beam은 안내륜을 통해 모노레일의 수평 하중을 전달하는 역할을 담당하고 있기 때문에 수직 하중을 타이어를 통해 전달 받는 콘크리트 바닥 및 강재 Beam과 함께 모노레일의 주행 안전에 없어서는 안 될 가장 중요한 구조물이다. 본 연구에서는 수평 하중을 감당하고 있을 뿐만 아니라 모노레일의 안정과 안내를 함께 보장 하면서 급전선을 지지하는 역할도 동시에 담당하고 있는 Y Beam과 Y Beam을 고정하는 클램프의 특성과 안전성에 대해 고찰하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1763-1766
• /
• 2003

Millimeter-wave networking is composed of narrow beam link. it is very substantial that beam connecting point to point is fixed in right direction. It is major requirement in the beam network to keep the beam in best direction. In this paper, We propose the method to find a best suited direction of the antenna's beam using the Genetic Algorithm (GA) in point-to-point link. Proposed method presume that each station knows his direction ${\theta}_1$ , ${\theta}_2$ at every step of GA, then it can be expected that GA is possible to search the ideal solution. Intensity of the received signal is evaluated by the multiplication of lengths to the point which the lobe meets with the horizontal line.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.274-277
• /
• 2003

Millimeter-wave networking is composed of narrow beam link. High directivity of the beam provides either advantage or disadvantage in comparison with conventional wide-lobe microwave communications. In such networks, it is very substantial that beam connecting point to point is fixed in right direction. It is major requirement in the beam network to keep the beam in best direction. In this paper, We propose the method to find a best suited direction of the antenna's beam using the Genetic Algorithm in point-to-point link. Proposed method presume that each station knows his direction $\theta$$_1$,$\theta$$_2$ at every step of Genetic Algorithm, then it can be expected that GA is possible to search the ideal solution. Intensity of the received signal is evaluated by the multiplication of lengths to the point which the lobe meets with the horizontal line.

• Nuclear Engineering and Technology
• /
• 제38권8호
• /
• pp.793-802
• /
• 2006

The design concept of a bending magnet to be installed in the KSTAR NBI system is presented. It is the function of a bending magnet that removes unconverted ions from the main beam stream and produces an 8 MW, 120 keV deuterium neutral beam. In order to determine the proper size and shape of the bending magnet, a parametric study on the B-field pattern was carried out by changing the dimensions of the pole face model. In addition, the detailed trajectories of the dominant ion species produced in the beam line were calculated. The electrical and cooling parameters of the coil assembly were also estimated.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.76-84
• /
• 2003

Stereolithography is the technique using a laser beam to cure a liquid resin, a photopolymer, with three dimensional computer-aided design (CAD) data. The build parameters of stereolithography such as beam size, scan velocity. hatch spacing, layer thickness and etc. are determined by the accuracy of prototype, the build time and the cured properties of the resin. In particular, beam size is important processing parameter fur the other parameters. Therefore, this study observed the cured property to beam size. For this purpose, according to hatch spacing and beam size, the cure width and depth were measured on single cured line. Also, the cure width and depth were measured at single cured layer As a result of experiments. cure depth which varied from 0.23mm to 0.34mm was directly proportioned to beam radius. on the other hand, cure width which varied from 0.42mm to 1.07mm was inversely proportioned to beam radius. Surface roughness varied from 1.12 to 2.23 m for the ratio of hatch spacing to beam radius.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3692-3699
• /
• 2023

The Rare isotope Accelerator complex for ON-line experiments in Korea houses several accelerator complexes. Among them, the µSR facility will be initially equipped with a 600 MeV and 100 kW proton beam to generate surface muons, and will be upgraded to 400 kW with the same energy. Accelerated proton beams lose approximately 20% of the power at the target, and the remaining power is concentrated in the beam direction. Therefore, to ensure safe operation of the facility, concentrated protons must be distributed and absorbed at the beam dump. Additionally, effective dose levels must be lower than the legal standard, and the beam dumps used at 100 kW should be reused at 400 kW to minimize the generation of radioactive waste. In this study, we introduce a tailored method for designing beam dumps based on the characteristics of the µSR facility. To optimize the geometry, the absorbed power and effective dose were calculated using the MCNP6 code. The temperature and stress were determined using the ANSYS Mechanical code. Thus, the beam dump design consists of six structures when operated at 100 kW, and a 400 kW beam dump consisting of 24 structures was developed by reusing the 100 kW beam dump.