• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제20권4호
• /
• pp.309-332
• /
• 2016

Finite element method has been applied to solve the fundamental governing equations of natural convective, electrically conducting, incompressible fluid flow past an infinite vertical plate surrounded by porous medium in presence of thermal radiation, viscous dissipation, Soret and Dufour effects. In this research work, the results of coupled partial differential equations are found numerically by applying finite element technique. The sway of significant parameters such as Soret number, Dufour number, Grashof number for heat and mass transfer, Magnetic field parameter, Thermal radiation parameter, Permeability parameter on velocity, temperature and concentration evaluations in the boundary layer region are examined in detail and the results are shown in graphically. Furthermore, the effect of these parameters on local skin friction coefficient, local Nusselt number and Sherwood numbers is also investigated. A very good agreement is noticed between the present results and previous published works in some limiting cases.

• 한국전기전자재료학회논문지
• /
• 제25권3호
• /
• pp.236-240
• /
• 2012

Limiting thermal exposure time using rapid thermal processing(RTP) has emerged as promising simplified process for manufacturing of solar cell in a continuous way. This paper reports the simplification of co-firing using RTP. Actual temperature profile for co-firing after screen printing is a key issue for high-quality metal-semiconductor contact. The plateau time during the firing process were varied at $450^{\circ}C$ for 10~16 sec. Glass frit in Ag paste etch anti-reflection layer with plateau time. Glass frit in Ag paste is important for the Ag/Si contact formation and performances of crystalline Si solar cell. We achieved 17.14% efficiency with optimum conditions.

• 청정기술
• /
• 제10권2호
• /
• pp.53-59
• /
• 2004

환경 친화적 대체 에너지로 연료전지가 많이 연구되고 있다. 그 중 높은 에너지밀도와 휴대성 때문에 직접 메탄올 연료전지(DMFC)에 대해 많은 관심을 가지고 연구중에 있다. 그러나 성능을 저하시키는 메탄올 crossover, 음극의 과전압 등과 같은 풀어야 할 문제들이 있다. 본 연구에서는 이러한 문제를 이해하기 위해 전기화학 반응식인 Tafel 식과 한계전류밀도식을 적용하여 전류-전압 곡선식을 해석적으로 구하였다. 운전변수를 변화시켜 해석적 해를 계산하여 DMFC의 거동을 분석하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.274-274
• /
• 2013

We fabricate encapsulation-layer of OLED panel from organic-inorganic hybrid thin film by atomic layer deposition (ALD) molecular layer deposition (MLD) using Al2O3 as ALD process and Adipoyl Chloride (AC) and 1,4-Butanediamine as MLD process. Ellipsometry was employed to verify self-limiting reaction of MLD. Linear relationship between number of cycle and thickness was obtained. By such investigation, we found that desirable organic thin film fabrication is possible by MLD surface reaction in monolayer scale. Purging was carried out after dosing of each precursor to eliminate physically adsorbed precursor with surface. We also confirmed roughness of the organic thin film by atomic force microscopy (AFM). We deposit AC and 1,4-Butanediamine at $70^{\circ}C$ and investigated surface roughness as a function of increasing thickness of organic thin film. We confirmed precursor's functional group by IR spectrum. We calculated WVTR of organic-inorganic hybrid super-lattice epitaxial layer using Ca test. WVTR indicates super-lattice film can be possibly use as encapsulation in flexible devices.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1292-1293
• /
• 2006

A non-equilibrium powder metallurgy processing such as an MA/SPS (Mechanical Alloying / Spark Plasma Sintering) process is examined in a Ti-48moll%Al. TiAl intermetallic compound is a potential light-weight/high-temperature structural material. One of the major problems, however, limiting the practical use of the material is its poor workability. From this point, the powder metallurgy (PM) processing route has been attractive alternative of the conventional processing for such material The MA/SPS process is able to apply to a LIGA process. Optimization of the pseudo-superplasticity enables to fabricate micro-parts made of fine grained ceramics composites of TiAl by the LIGA process.

• KSBB Journal
• /
• 제13권2호
• /
• pp.119-124
• /
• 1998

Twelve bacterial strains capable of growing on phenol minimal medium were isolated from iron foundry activated sludge by enrichment culture, and amount them, one isolate which was the best in cell growth and phenol degradation was selected and identified as Acinetobacter junii POH. The optimal temperature, initial pH and phenol concentration in the above medium were 3$0^{\circ}C$, 7.5 and 1000 ppm, respectively. Cell growth of Acinetobacter junii POH dramatically increased 20 hrs cultivation-time and reached a almost stationary phsae 40 hrs cultivation-time then phenol was degraded about 98%. Cell growth was inhibited y phenol at concentrations over 1500 ppm. The isolate was resistant to several antibiotics as well as various heavy metal ions. The growth-limiting log P value of Acinetobacter junii POH on organic solvents was 2.9 in the LB medium. Therefore, it is suggested that Acinetobacter junii POH could be effectively used for the biological treatment of wastewater containing the presence of heavy metal ions and organic solvents.

• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.665-668
• /
• 2008

티타늄 함유 제올라이트 촉매 Ti-MCM-22를 이용하여 과산화수소를 산화제로 한 프로필렌 에폭시화반응을 수행하였으며, 반응 온도와 압력, 촉매량, 한계 반응물인 과산화수소의 농도, 산화프로필렌의 첨가, 용매 및 촉매 재생 효과를 조사하였다. Acetonitrile 용매 하에서 반응 실험을 수행한 결과, 99% 이상의 $H_2O_2$ 전화율과 100%에 근접하는 산화프로필렌 선택도를 보였다.

• 약학회지
• /
• 제31권5호
• /
• pp.286-295
• /
• 1987

The relationship between in vitro release and in vivo bioavailability of acetaminophen from suppositories was investigated. Effect of glycyrrhizin on the drug release and rectal absorption in rats was also examined. Suppositories containing 25mg of acetaminophen were prepared with Wecobee FS (fatty base) or PEG (water-soluble base) bases. The release from the suppositories were determined with USP rotating basket dissolution apparatus and with the suppository release tester. The temperature of the dissolution medium was very critical for the dissolution of acetaminophen from Wecobee FS suppositories. The bioavailability of acetaminophen was calculated from the plasma concentration-time curve after rectal administration of the suppositories to the rats. There were no significant differences in AUC following rectal administration of Wecobee FS and PEG suppositories, but the release and absorption from the Wecobee FS suppositories were faster than those from PEG suppositories. The dissolution rate obtained by the suppository release tester was better correlated with in vivo absorption rate constant than that by the USP dissolution apparatus. It suggests that the partitioning between rectal fluid and suppository base is the rate-limiting step in the rectal absorption of acetaminophen from suppositories. Glycyrrhizin was found not to affect in vitro dissolution and rectal absorption of acetaminophen.

• The Korean Journal of Ecology
• /
• 제21권5_2호
• /
• pp.491-499
• /
• 1998

An investigation was performed to establish the mathematical theories of a vibration for the plant growth and a wave distribution of a plant population on the boundary condition of a limiting factor in the environment. The mathematical theories of the plant growth vibration and wave distribution had been elucidated by the plant growth and the timber line on the middle slope of the west side of Mt. Paektu. The Betula ermaruii composes the timber line on about 2,060 m elevation of sea label, has a growth vibration on the ground surface and takes a wave distribution due to a boundary condition of alpine temperature gradient.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권1호
• /
• pp.27-31
• /
• 2000

This paper presents the performance evaluation of an HTS transformer. Numerical calculation by finite element method was used to evaluate the performance. BSCCO-2223 HTS tapes and double pancake winding were adopted in this design. Four double pancake windings were used in total. Among them two windings were connected in series for high voltage winding and two windings are connected in parallel for low voltage winding. Propertied of various type of the winding arrangement were examined. Characteristics of the transformer during the transient which was caused by sudden short were simulated. The current limiting effect, temperature rise and resistance growth of the superconducting winding were shown.