• 대한조선학회논문집
• /
• 제33권1호
• /
• pp.54-64
• /
• 1996

편저형 선형의 구상 선수에서 기포를 공급하면 기포가 선저 표면에 공급되고, 기포 공급의 효과로 물과 선저 표면이 직접 접촉하는 면적이 줄어들게 되어 선박의 마찰 저항을 감소시킬 수 있을 것이다. 이를 실험적으로 확인하기 위하여 구상 선수 선형에 대하여, 우선 선수 주변에서의 한계유선을 관측하고, 국부적 압력 분포 및 마찰 응력을 계측하였다. 다음으로, 기포 공급 조건을 바꾸며 실험한 결과, 국부 표면 마찰 저항의 감소를 확인 할 수 있었다. 또한, 기포 공급시 일어나는 운동량 변화가 저항 성분이 되는 것으로 확인되었다. 이러한 실험 결과는 실용 선형에서 기포법으로 저항 감소를 얻어내기 위한 기초적 연구가 될 수 있을 것으로 판단된다.

• 대한조선학회논문집
• /
• 제53권6호
• /
• pp.456-464
• /
• 2016

To design the modified hull form with relatively unfavorable dimensions and constraints than the parent ship the stepwise design was applied. In each design step the resistance characteristics was estimated by numerical calculations using CFD programs as Wavis 1.4, Wavis 2.1 and Fluent 12.1. The wave profiles along hull surface by potential flow calculations were investigated to improve wave resistance by modifying the bow shapes. To improve the stern shapes with a point of viscous form resistance the pressure distributions on hull surface and the limiting streamlines are investigated by viscous flow calculations. The design objectives such as shortening the LBP, enlarging the propeller tip clearance, moving forward of the LCB location and increasing the displacement were applied by stepwise to develop the new hull form of DWT 75,000 product oil carrier. Finally a new hull form was developed without the resistance performance loss compared with the parent ship.

• 한국가시화정보학회지
• /
• 제22권1호
• /
• pp.49-60
• /
• 2024

The purpose of this study establishes the deep neural network (DNN) and Decoder models to predict the flow and thermal fields of three-dimensional wavy wings as a passive flow control. The wide ranges of the wavy geometric parameters of wave amplitude and wave number are considered for the various the angles of attack and the aspect ratios of a wing. The huge dataset for training and test of the deep learning models are generated using computational fluid dynamics (CFD). The DNN and Decoder models exhibit quantitatively accurate predictions for aerodynamic coefficients and Nusselt numbers, also qualitative pressure, limiting streamlines, and Nusselt number distributions on the surface. Particularly, Decoder model regenerates the important flow features of tiny vortices in the valleys, which makes a delay of the stall. Also, the spiral vortical formation is realized by the Decoder model, which enhances the lift.

• 대한기계학회논문집B
• /
• 제29권8호
• /
• pp.948-955
• /
• 2005

A three-dimensional computation was conducted to understand effects of the inlet boundary layer thickness on the internal flow in a low-speed axial compressor operating at the design condition($\phi=85\%$) and near stall condition($\phi=65\%$). At the design condition, the flows in the axial compressor show, independent of the inlet boundary layer thickness, similar characteristics such as the pressure distribution, size of the hub comer-stall, tip leakage flow trajectory, limiting streamlines on the blade suction surface, etc. However, as the load is increased, the hub corner-stall grows to make a large separation region at the junction of the hub and suction surface for the inlet condition with thick boundary layers at the hub and casing. Moreover, the tip leakage flow is more vortical than that observed in case of the thin inlet boundary layer and has the critical point where the trajectory of the tip leakage flow is abruptly turned into the downstream. For the inlet condition with thin boundary layers, the hub corner-stall is diminished so it is indistinguishable from the wake. The tip leakage flow leans to the leading edge more than at the design condition but has no critical point. In addition to these, the severe reverse flow, induced by both boundary layer on the blade surface and the tip leakage flow, can be found to act as the blockage of flows near the casing, resulting in heavy loss.

• 한국항해항만학회지
• /
• 제38권6호
• /
• pp.585-591
• /
• 2014

본 논문의 주 목적은 프루드 수가 0.5 이상인 중형 경비정의 속도성능을 모형시험 이전에 CFD 결과를 바탕으로 기존의 모형시험자료를 활용하였다. 모형시험 이전에 CFD를 이용하여 선속 별로 추정된 제동마력이 주어진 엔진마력을 만족하는지를 평가 하였다. 대상선박은 선미가 서로 다른 두 가지 선형을 선정하였다. 점성 유동장 계산은 상용 CFD 코드인 STAR-CCM+를 사용하였으며, 자유수면과 자세 변화(동적 트림)를 모두 고려하였다. 알몸 선체의 저항 값은 CFD를 이용하여 추정되었다. 점성 유동 해석을 통해 두 가지 선형의 자유수면 파형, 압력분포, 한계유선 그리고 프로펠러 면에서의 속도분포를 비교하였다. 점성 유동 해석 결과를 바탕으로 두 가지 선형에 대한 유효마력 즉, 저항성능을 평가하였다. 부가물 부착에 따른 저항 증가량과 준추진효율 계수(ETAD, ${\eta}_D$)는 모형시험 자료를 활용하였다. 중형 경비정과 같은 고속선박에 관한 속도성능 추정법이 CFD와 기존 시험자료를 이용하여 개발되었다.

• Journal of Ship and Ocean Technology
• /
• 제10권4호
• /
• pp.12-23
• /
• 2006

In this paper, a numerical study is carried out to investigate the turbulent flow around a twin-skeg container ship model with rudders including propeller effects. A commercial CFD code, FLUENT is used with body forces distributed on the propeller disk to simulate the ship stem and wake flows with the propeller in operation. A multi-block, matching, structured grid system has been generated for the container ship hull with twin-skegs in consideration of rudders and body-force propeller disks. The RANS equations for incompressible fluid flows are solved numerically by using a finite volume method. For the turbulence closure, a Reynolds stress model is used in conjunction with a wall function. Computations are carried out for the bare hull as well as the hull with appendages of a twin-skeg container ship model. For the bare hull, the computational results are compared with experimental data and show generally a good agreement. For the hull with appendages, the changes of the stem flow by the rudders and the propellers have been analyzed based on the computed result since there is no experimental data available for comparison. It is found the flow incoming to the rudders has an angle of attack due to the influence of the skegs and thereby the hull surface pressure and the limiting streamlines are changed slightly by the rudders. The axial velocity of the propeller disk is found to be accelerated overall by about 35% due to the propeller operation with the rudders. The area and the magnitude of low pressure on the hull surface enlarge with the flow acceleration caused by the propeller. The propellers are found to have an effect on up to the position where the skeg begins. The propeller slipstream is disturbed strongly by the rudders and the flow is accelerated further and the transverse velocity vectors are weakened due to the flow rectifying effect of the rudder.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권1호
• /
• pp.1-13
• /
• 2010

A comparative study between a computation and an experiment has been conducted to predict the performance of a Pod type waterjet for cm amphibious wheeled vehicle. The Pod type waterjet has been chosen on the basis of the required specific speed of more than 2500. As the Pod type waterjet is an extreme type of axial flow type waterjet, theoretical as well as experimental works about Pod type waterjets are very rare. The main purpose of the present study is to validate and compare to the experimental results of the Pod type waterjet with the developed CFD in-house code based on the RANS equations. The developed code has been validated by comparing with the experimental results of the well-known turbine problem. The validation also extended to the flush type waterjet where the pressures along the duct surface and also velocities at nozzle area have been compared with experimental results. The Pod type waterjet has been designed and the performance of the designed waterjet system including duct, impeller and stator was analyzed by the previously mentioned m-house CFD Code. The pressure distributions and limiting streamlines on the blade surfaces were computed to confirm the performance of the designed waterjets. In addition, the torque and momentum were computed to find the entire efficiency and these were compared with the model test results. Measurements were taken of the flow rate at the nozzle exit, static pressure at the various sections along the duct and also the nozzle, revolution of the impeller, torque, thrust and towing forces at various advance speed's for the prediction of performance as well as for comparison with the computations. Based on these measurements, the performance was analyzed according to the ITTC96 standard analysis method. The full-scale effective and the delivered power of the wheeled vehicle were estimated for the prediction of the service speed. This paper emphasizes the confirmation of the ITTC96 analysis method and the developed analysis code for the design and analysis of the Pod type waterjet system.