• 제목/요약/키워드: Limiting Oxygen Index

검색결과 43건 처리시간 0.021초

무안반도 연안수질의 시ㆍ공간적 변동과 소규모 방조제의 영향 (Temporal and Spatial Fluctuations of Coastal Water Quality and Effect of Small Tide Embankment in the Muan Peninsula of Korea)

  • 이대인;조현서;이규형;이문옥
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제6권4호
    • /
    • pp.24-36
    • /
    • 2003
  • 본 연구는 무안반도 주변 연안수질의 계절별, 조석별 변동과 방조제의 수문개방시 시간에 따른 수질에 미치는 영향을 평가하였다. 주요 수질인자 중 용존산소는 하계의 대부분 정점과 추계 썰물시 저층에서 불포화상태를 나타내었지만, 다른 조사시기에서는 대부분 포화상태를 나타내었는데, 광합성에 의한 영향보다는 기후변동에 크게 영향을 받는 것으로 사료되었으나 생물성장에는 악 영향을 미치지 않는 범위였다. 화학적 산소요구량은 춘계 밀물시와 추계의 밀물과 썰물시에 표층과 저층 모두 평균 2㎎/L이상의 고농도를 나타내고 있어 해역수질환경 기준 II등급을 초과하였는데, 이것은 이 지역이 매우 낮은 Chl. a농도로 보아서 식물플랑크톤에 의한 유기물보다는 이 시기에 증가된 저층교란에 의한 부유물질과 담수유입의 영향이라 판단되었다 용존무기질소는 전 조사기간에 걸쳐 0.11~8.63㎍-at/L의 변동범위로 하계와 추계에서 다소 높고, 조석별 차는 뚜렷하지 않았으며 저층에서 놀게 나타났다. 용존무기인은 ND~2.08㎍-at/L의 변동범위를 보였으며 춘계를 제외하고는 평균 0.30㎍-at/L이상의 다소 높은 값을 보였다. N/P비는 대부분 16이하로 조사해역은 질소가 식물플랑크톤 등의 기초생산자에 대한 성장을 제한하고 있는 것으로 판단되었다. 부영양화 지수는 대부분 1이하였으나, 추계에는 밀물시 방조제 지선 주변해역에서 1이상의 부영양화 현상을 나타내었고 썰물시에는 남부해역에서 부영양화 현상을 나타내었다. 추계 강우시 방조제 수문을 약 12분 동안 개방으로 인해 담수가 방류된 후 조석류에 따라서 방조제와 지선 주변해역에서 COD, DIN, DIP 등의 농도가 1시간 내지 2시간 안에 일시적으로 급증하였으나 그 후 다시 감소하여 방류전의 농도로 회복하는 특성을 보여 주었다. 따라서 본 해역의 지속적 건강성을 위해서는 간석지 매립에 의해 조성된 방조제를 통한 방류량 및 오염부하량을 효과적으로 관리해야 하는 것으로 평가되었다.

  • PDF

인과 염소 함유 변성폴리에스터/이소시아네이트 가교 폴리머의 PU 난연도료에의 적용 (Application of Isocyanate and Modified Polyester Containing Phosphorous and Chlorine to Crosslinked PU Flame-Retardant Coatings)

  • 박홍수;김송형;안성환;유규열;함현식
    • 한국응용과학기술학회지
    • /
    • 제24권2호
    • /
    • pp.124-139
    • /
    • 2007
  • In order to obtain the maximum flame retardancy with the minimal deterioration of physical properties of PU flame-retardant coatings, chlorine and phosphorous functional groups were introduced into the pre-polymer of modified polyesters. In the first step, the tetramethylene bis(orthophosphate) (TBOP) and neohexanediol dichloroacetate (DCA-adduct) intermediates were synthesized. In the second step, 1,4-butanediol and adipic acid monomers were polymerized with the two kind of intermediates to obtain copolymer. The modified polyesters containing chlorine and phosphorous (ATBA-10C, -20C, and -30C) were synthesized by adjusting the contents of chlorine compound (dichloroacetic acid, 10, 20, 30 wt%) with fixed the content of phosphorous compound (2 wt%). The PU flame-retardant coatings (TTBAH -10C, -20C, and -30C) were prepared using the synthesized ATBAs and HDI-trimer as curing agent at room temperature. The physical properties of PU flame-retardant coatings with chlorine and phosphorous were inferior to those with phosphorous only and the properties were getting worse with increasing chlorine content. Flame retardancy was tested with three methods. With the vertical method, Complete combustion time of ATBAHs were $259^{\sim}347$ seconds, which means that the prepared coatings are good flame-retardant. With the $45^{\circ}$ Meckel burner method, char lengths of the three prepared coatings were less than 2.9 cm, which indicates that the prepared coatings are 1st grade flame retardancy. With the limiting oxygen index (LOI) method, the LOI values of the three prepared coatings were in the range of $30^{\sim}35%$, which proves good flame retardancy of the prepared coatings. From the results of flame retardancy tests of the specimens that contain the same amounts of flame retarding compounds, it was found that the coatings containing both phosphorous and chlorine show higher flame retardancy than the coatings containing phosphorous alone. This indicates that some synergy effect of flame retardancy exists between phosphorous and chlorine.

HDPE/EPDM/Boron Carbide/Triphenyl Phosphate 블렌드의 상용화제 첨가에 따른 난연성 및 기계적 물성 연구 (A Study on Flammability and Mechanical Properties of HDPE/EPDM/Boron Carbide/Triphenyl Phosphate Blends with Compatibilizer)

  • 신범식;정승태;전준표;김현빈;오승환;강필현
    • 폴리머
    • /
    • 제36권5호
    • /
    • pp.549-554
    • /
    • 2012
  • 난연제 triphenyl phosphate는 HDPE(high-density polyethylene)/EPDM(ethylene-propylene diene monomer)/boron carbide 내에서 miscibility가 좋지 못하여 고분자의 기계적 물성을 크게 저하시킨다. HDPE/EPDM/boron carbide/triphenyl phosphate 블렌드의 분산성을 향상시키기 위해서 상용화제로 PE-g-MAH(polyethylene-graft-maleic anhydride)를 사용하여 블렌딩하였다. Triphenyl phosphate 함량이 증가할수록 인장강도를 크게 저하시킴을 확인하였다. 하지만 상용화제 첨가로 인하여 기계적 물성이 향상되는 것을 확인하였다. Triphenyl phosphate의 분산성의 향상은 SEM 분석을 통해서 확인하였다. HDPE/EPDM/boron carbide/triphenyl phosphate의 내열성과 난연성을 측정하기 위해서 TGA 분석과 LOI 분석을 진행하였다. 분산성이 향상됨에 따라서 triphenyl phosphate 첨가제의 기본적인 특성인 내열성과 난연성이 향상되었으며, 그 결과로 자기 소화성인 21% 이상의 한계산소지수(LOI)를 가지는 HDPE/EPDM/boron carbide/triphenyl phosphate 블렌드를 얻을 수 있었다.