• Journal of the Korean Wood Science and Technology
• /
• v.22 no.3
• /
• pp.32-38
• /
• 1994

The methods in wood processing are so limited at present that a scope of its utilization is restricted. This often makes wood itself less valuable as a material comparing with other materials, that is, plastics, metals, and glass. Such differences are due to a lack of plasticity in wood, i.e. it cannot be melted, dissolved, or softened sufficiently for molding. However, once plastic properties are added to wood, it becomes more useful material. This further broadens the method in wood processing to a variety of fields. In this way, wooden material which is limited in use can be modified into a high quality product with additional value. Furthermore, utilization of wastes from wood, for example, would be made viable. In this study, thermoplasticization was carried out by benzylation of wood(sawdust). Various factors those affect the reaction were tested to produce benzylated wood with different degrees of substitution. Reaction temperature and time were the quite important factors. Optimum reaction temperature was 110$^{\circ}C$, and weight percent gains(WPG) of final products increased gradually with the increase of reaction time. The pretreatment (or preswelling) of wood with alkaline solution had a critical effect on benzylation. and the concentration of alkaline solution should be above 30% to obtain high weight percent gain. The thermal flow temperature of the benzylated wood decreased with the increase in weight percent gain, that of 80% weight percent gain is about 200$^{\circ}C$.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.115-120
• /
• 2010

Products companies, which manufactures finished goods with modular parts, will expect that the proper parts should be delivered to assembly line not only just in time (JIT) but also just in sequence (JIS) and also expect that faulty goods will not be produced due to the delivery of wrong parts. In order to satisfy the above requirements, recently Smart Pallet based Parts Delivery system (SPPD) was proposed. SPPD system can overcome the drawback of bar code based part delivery system in which much time for checking proper and in sequence parts is wasted due to labors' working in hand as well as the drawback of RFID based part delivery system in which recognition distance of RFID is very limited. In the paper, a PDA system is proposed and further implemented to maximize the efficiency of SPPD's operation as well as to manage the limited power of smart pallets efficiently.

• Smart Structures and Systems
• /
• v.22 no.2
• /
• pp.201-207
• /
• 2018

This paper proposes a line laser thermography scanning (LLTS) system for multiple crack evaluation on a concrete structure, as the core technology for unmanned aerial vehicle-mounted crack inspection. The LLTS system consists of a line shape continuous-wave laser source, an infrared (IR) camera, a control computer and a scanning jig. The line laser generates thermal waves on a target concrete structure, and the IR camera simultaneously measures the corresponding thermal responses. By spatially scanning the LLTS system along a target concrete structure, multiple cracks even in a large scale concrete structure can be effectively visualized and evaluated. Since raw IR data obtained by scanning the LLTS system, however, includes timely- and spatially-varying IR images due to the limited field of view (FOV) of the LLTS system, a novel time-spatial-integrated (TSI) coordinate transform algorithm is developed for precise crack evaluation in a static condition. The proposed system has the following technical advantages: (1) the thermal wave propagation is effectively induced on a concrete structure with low thermal conductivity of approximately 0.8 W/m K; (2) the limited FOV issues can be solved by the TSI coordinate transform; and (3) multiple cracks are able to be visualized and evaluated by normalizing the responses based on phase mapping and spatial derivative processes. The proposed LLTS system is experimentally validated using a concrete specimen with various cracks. The experimental results reveal that the LLTS system successfully visualizes and evaluates multiple cracks without false alarms.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.4 s.32
• /
• pp.55-59
• /
• 2004

Recently the wireless-internet has been spreading extensively. People are spending a large part of their time gaining access to information using a mobile device. However. limited process speed. low bandwidth, the low battery capacity of mobile devices and a high rate of wireless network errors brings out many overheads during service time with server for service. In this paper, we suggest an autonomous service delivery system. which provides mobile agent capability to users that can not maintain a connection. We have developed the system based on java mobile agent technology. Using this system, we can provide more effective services to users when the user is sending requirements of service through a mobile device that has limited resources and can manage the contact server dynamically when new services are added.

• Textile Coloration and Finishing
• /
• v.17 no.5 s.84
• /
• pp.53-60
• /
• 2005

Fusing press m/c is used for heating and pressing the specimens that are fed into between the two moving belts. Therefore the belt movement, belt temperature, and the pressure between belts must be kept constant. Especially, the belts should move in a limited operation range. When the belts run far out of the operation point, the machine has to be stopped, which results in a product defect because the fusing conditions, e.g., temperature and pressure, change during the transient process time period. It is important to avoid the belt stopping by maintaining the belt movement in a limited range. This study reports about the movement of the endless fusing belt in a long-span roller fusing m/c. The belt position changes as the 1st-order system does; if the roller axes are slanting each other with a certain angle, the belt running around the two rolls shows a dynamic behavior with the time that deviates fastly at the beginning from the initial condion and slows down. Then it reaches at a final position. The skewer the axes, the greater the position change. The inital change rate of the belt becomes large as the skewness of the axes between the two rollers increases.

• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.609-616
• /
• 2005

A high ammonia nitrogen ($NH_3-N$) concentration has been recursively observed every winter season in Geum River, which hindered chemical treatment processes at a water treatment plant. A flushing discharge from Daecheong Dam was often considered to dilute $NH_3-N$, but information on the quantitative effect of flushing on the downstream water quality was limited. In this study, the impact of a short-term reservoir flushing on the downstream water quality was investigated through field experiments and unsteady water quality modeling. On November 22, 2003, the reservoir discharge was increased from $30m^3/sec$ to $200m^3/sec$ within 6 hours for the purpose of the experiment. The results showed that flushing flow tends to reduce downstream $NH_3-N$ concentrations considerably, but the effectiveness was limited by flushing amount and time. An unsteady river water quality model was applied to simulate the changes of nitrogen concentrations in response to reservoir flushing. The model showed very good performance in predicting the travel time of flushing flow and the effect of flushing discharge on the reduction of downstream $NH_3-N$ concentrations at Maepo and Geumnam site, but a significant discrepancy was observed at Gongju site.

• Speech Sciences
• /
• v.11 no.2
• /
• pp.181-192
• /
• 2004

This paper presents an efficient speech interactive agent rendering smooth car navigation and Telematics services, by employing embedded automatic speech recognition (ASR), distributed speech recognition (DSR) and text-to-speech (ITS) modules, all while enabling safe driving. A speech interactive agent is essentially a conversational tool providing command and control functions to drivers such' as enabling navigation task, audio/video manipulation, and E-commerce services through natural voice/response interactions between user and interface. While the benefits of automatic speech recognition and speech synthesizer have become well known, involved hardware resources are often limited and internal communication protocols are complex to achieve real time responses. As a result, performance degradation always exists in the embedded H/W system. To implement the speech interactive agent to accommodate the demands of user commands in real time, we propose to optimize the hardware dependent architectural codes for speed-up. In particular, we propose to provide a composite solution through memory reconfiguration and efficient arithmetic operation conversion, as well as invoking an effective out-of-vocabulary rejection algorithm, all made suitable for system operation under limited resources.

• Nuclear Engineering and Technology
• /
• v.45 no.5
• /
• pp.589-596
• /
• 2013

In a pressurized heavy water reactor, following loss of the primary coolant, severe core damage would begin with the depletion of the liquid moderator, exposing the top row of internally-voided fuel channels to steam cooling conditions on the inside and outside. The uncovered fuel channels would heat up, deform and disassemble into core debris. Large inventories of water passively reduce the rate of progression of the accident, prolonging the time for complete loss of engineered heat sinks. The efficacy of available backup and ultimate heat sinks, available in a CANDU 6 reactor, in mitigating the consequences of a prolonged station blackout scenario was analysed using the MAAP4-CANDU code. The analysis indicated that the steam generator secondary side water inventory is the most effective heat sink during the accident. Additional heat sinks such as the primary coolant, moderator, calandria vault water and end shield water are also able to remove decay heat; however, a gradually increasing mismatch between heat generation and heat removal occurs over the course of the postulated event. This mismatch is equivalent to an additional water inventory estimated to be 350,000 kg at the time of calandria vessel failure. In the Enhanced CANDU 6 reactor ~2,040,000 kg of water in the reserve water tank is available for prolonged emergencies requiring heat sinks.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.5
• /
• pp.1-9
• /
• 2017

Recently, flash memory has been in a great demand from embedded system sectors for storage devices. However, program/erase (P/E) cycles per block are limited on flash memory. For the limited number of P/E cycles, many wear leveling techniques are studied. They prolonged the life time of flash memory using information tables. As one of the techniques, block erase table (BET) method using a bit array table was studied for embedded devices. However, it has a disadvantage in that performance of wear leveling is sharply low, when the consumption of memory is reduced. To solve this problem, we propose a novel wear leveling technique using Sampling-based Block Erase Table (SBET). SBET relates one bit of the bit array table to each block by using exclusive OR operation with round robin function. Accordingly, SBET enhances accuracy of cold block information and can prevent to decrease the performance of wear leveling. In our experiment, SBET prolongs life time of flash memory by up to 88%, compared with previous techniques which use a bit array table.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.713-718
• /
• 2012

Lumber spine range of motion has been used to measure of physical and functional impairment by various tools from a ruler to 3D kinematic devices. However, pre-existing tools have problems in either movement or accuracy and reliability limitations. Accurate devices are limited by fixed space whereas simple devices are limited in measuring complex movements with less accuracy. In order to solve the location, movement and accuracy limitations at once, we have developed a novice measurement device equipped with accelerometer sensor and gyroscope sensor for getting three-dimensional information of motion. Furthermore, Kalman filter was applied to the algorithm to improve accuracy. In addition, RF wireless communication was added for the user to conveniently check measured data in real time. Finally, the measurement method was improved by considering the movement by a reference point. An experiment was conducted to test the accuracy and reliability of the device by conducting a test-retest reliability test. Further modification will be conducted to used the device in various joints range of motion in clinical settings in the future.