• 대한기계학회논문집B
• /
• 제31권1호
• /
• pp.51-61
• /
• 2007

This paper presents numerical and theoretical studies of acoustic wave interactions in slightly compressible liquids within piezoelectrically driven inkjet print heads. The interconnected flow channels may cause jet crosstalk, resulting in poor printing quality. It should be reduced by modifying the channel structure with the acoustic wave interactions considered. Compressible gas flow driven by the sudden movement of a top wall in the channel is calculated using Flow3D and is validated with the narrow gap theory. Limited compressibility model of the Flow3D is employed to calculate pressure waves of slightly compressible ink flow. It is found that reducing restrictor width can damp out the jet crosstalk by inhibiting the pressure wave propagation. The degree of crosstalk has been quantified using the maximum values of cross-correlations between neighboring channels and a critical channel dimension for acceptable crosstalk has been proposed. This finding is verified by drop visualization experiments using silicon-micromachined piezo inkjet print heads that are fabricated by our group.

• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.140-147
• /
• 2008

This paper describes a Neural Network based PD control scheme for motion control of pneumatic servo cylinder. Pneumatic systems have inherent nonlinearities such as compressibility of air and nonlinear frictions present in cylinder. The conventional linear controller is limited in some applications where the affection of nonlinear factor is dominant. A self-excited oscillation method is applied to derive the dynamic design parameters of linear model. Based on the parameters thus identified, a PD feedback compensator is designed first and then a neural network is incorporated. The experiments of a trajectory tracking control using the proposed control scheme are performed and a significant reduction in tracking error is achieved by comparing with those of a PD control.

• 대한기계학회논문집A
• /
• 제30권2호
• /
• pp.105-111
• /
• 2006

This paper describes a Neural Network based PID control scheme for pneumatic NC axes. Pneumatic systems have inherent nonlinearities such as compressibility of air and nonlinear frictions present in cylinder. The conventional PID controller is limited in some applications where the affection of nonlinear factor is dominant. A self-excited oscillation method is applied to derive the dynamic design parameters of linear model. The gains of PID controller are determined using a self tuning scheme. The experiments of a trajectory tracking control using the proposed control scheme are performed and a significant reduction in tracking error is achieved by comparing with those of a PID control.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.367-374
• /
• 2005

In order to construct the farm road in Shi-Hwa project, coarse soils excavated from hillsides have been used as road materials for reclamation. Suitable borrow pits available in land are now limited and also they bring about environmental problems when soils are excavated at the borrow pits and transported to the site. When using fine and wet materials as fill, however, many engineering problems can be encountered. Usually, the materials have high water contents, low strength, and high compressibility. In order to use them, we need research that can improve the inherent properties of those materials. In order to tackle with the problems, researches on soil improvement involve mixing lime geo-cement to the fine wet soils. A lab model test is necessary to verify effectiveness and comparison of those techniques. A field test is also required to show applicability and to find problems that may exist in the design and construction stages.

• 대한화학회지
• /
• 제31권5호
• /
• pp.375-381
• /
• 1987

trans-[Cr(tn)$_2Cl_2]^+$ 및 trans-[Cr(en)(tn)Cl$_2]^+$ 이온의 수화반응속도를 분광광도법을 이용하여 온도의 압력을 변화시켜 가면서 측정하였다. 활성화부피는 모두 음의 값을 가졌으며. 이들 착이온의 경우 그 범위는 -1.7 ∼ -2.9cm$^3$mol$^{-1}$이었다. 활성화엔트로피 및 활성화압축류 계수는 작은 음의 값을 가졌다. 이러한 열역학적 결과로부터 이들 착이온의 수화반응은 교환회합 메카니즘으로 진행됨을 추정할 수 있다. 한편 각중첩모형 체제내에서 가상적 중간체의 총 안정화에너지를 고려하여 반응경로와 전이상태의 구조에 대한 정보를 얻을 수 있는데 추정한 메카니즘과 실험적으로 관찰된 결과가 일치함을 알았다.