• Safety and Health at Work
• /
• v.2 no.3
• /
• pp.243-249
• /
• 2011

Objectives: Cement contains hexavalent chromium, which is a human carcinogen. However, its effect on cancer seems inconclusive in epidemiologic studies. The aim of this retrospective cohort study was to elucidate the association between dust exposure in the cement industry and cancer occurrence. Methods: The cohorts consisted of male workers in 6 Portland cement factories in Korea. Study subjects were classified into five groups by job: quarry, production, maintenance, laboratory, and office work. Cancer mortality and incidence in workers were observed from 1992 to 2007 and 1997-2005, respectively. Standardized mortality ratios and standardized incidence ratios were calculated according to the five job classifications. Results: There was an increased standardized incidence ratio for stomach cancer of 1.56 (27/17.36, 95% confidence interval: 1.02-2.26) in production workers. The standardized mortality ratio for lung cancer increased in production workers. However, was not statistically significant. Conclusion: Our result suggests a potential association between cement exposure and stomach cancer. Hexavalent chromium contained in cement might be a causative carcinogen.

• Explosives and Blasting
• /
• v.22 no.2
• /
• pp.1-11
• /
• 2004

일반적으로 국내 석회석 광산에서의 발파는 20ms나 25ms 시차를 가지는 지발발파로 시행되어지고 있다. 국외에서는 전자뇌관을 사용하여 암반의 지질학적인 특성에 따라 지발 시차를 사용자의 현장에 따라 선정하여, 주변 보안 물건에 따른 진동 및 소음을 경감하면서, 1회 발파의 생산량을 증대할 수 있으며, 2차 파쇄 비용 및 적재비용을 절감하는 최적의 시차를 적용하여 발파 규모를 줄이지 않는 발파패턴을 적용하고 있다. 본 연구는 해외에서 사용되고 있는 전자뇌관을 국내 현장 석회석 광산(단양)에 적용함으로 최적지연시차를 찾아내는 방법과 초시의 오차에 따른 문제점과 향후 국내 적용성을 판단하고자 하였다. 대규모 석회석 광산을 대상으로 최적시차를 판단하고자 동일 패턴에서 시차를 6ms ~ 30ms로 시험발파를 시행하여 4가지 요소 발파진동속도, 주 주파수특성, 파쇄입도, 암석 이동 및 버력의 상태를 분석하여 각 시차에 따른 배점을 두어, 당 현장에 요구되는 개별 가중치를 선정하여 분석하였다. 분석 결과 당 현장에서의 발파결과에 따른 요소별 가중치를 발파진동속도(20), 주 주파수 특성(20), 파쇄입도(40), 암석 이동(10) 및 버력의 상태(10)로 하여 분석한 결과 15ms가 최적시차로 나타냈다. 향후 각 현장에 적합한 요소별 가중치를 선정하여 현장별 최적시차를 도출한다면 최적의 발파효과를 있을 것으로 판단된다.

• Tunnel and Underground Space
• /
• v.8 no.2
• /
• pp.118-129
• /
• 1998

A three dimensional boundary element method-BEAP3D was applied to the stability analysis of the mine openings not only to improve the stability during mining operations but also to serve the evaluation of the mine openings for further utilization. Stability analysis on the stability of the room-and-pillar stopes underneath of the old mine openings and the openings to be created by the newly proposed sublevel stoping method at the Nowhado Pyrophyllite Mine, showed that rock mass around the old and new stopes would be stable. Six stopes of a sublevel stoping designed for the Choongmu Limestone Quarry would be stable, too. A sublevel stoping method consisting of six stopes was similarly suggested for the Keumpyung Quartzite Mine. The stability can be guaranteed through out six stopes. Since mining starts from the bottom 1st sublevel to the uppermost sublevel, the safety of the stopes will improve together with the mining process. It would highly be recommended to investigate in-situ rock properties and the rock stresses for future studies. Even though the rock around the uppermost part and bottom of all the stopes have a very high factor of safety, spot reinforcements such as rock bolting would be recommended to mitigate the intermediate and minor principal stresses acting in a tensile mode.

• The Journal of Engineering Geology
• /
• v.1 no.1
• /
• pp.2-10
• /
• 1991

Some geotechnical considerations might be suggested to the construction performance from the school and the housing projects in Tripoli sub-region, Libya. The subsurface informations were compiled from the site investigation reports, for which more than 700 borings and lots of laboratory test had been conducted from 1984 to 1986. Most subsurface of 10 meter depth in the Jafara plain consists of medium dense silty sand. Some ground in the plain have poor top soil with interbedded calcarenite or limestone. The shallow subsurface is found to be very poor soil in the southern mountain range. Weak soil is hardly found except in the sabkha area. In general, natural silty sand layer may have a presumed bearing capacity of more than 150kN/$m^2$, where spread or strip footing is applied. Proper fine aggregate and natural coarse one are restricted in Tripoli sub-region. Coarse aggregate is generally supplied from the dolomite quarry.

• Economic and Environmental Geology
• /
• v.51 no.1
• /
• pp.49-65
• /
• 2018

The lime-soil mixture on tomb barrier (LSMB) is a type of tomb in Joseon Dynasty, which made with so-called 'Sammul' (three material compound) that mixture of lime, fine sand and yellow ocher. This study divided the tombs of the Gungri Site from Joseon Dynasty with layered wall and integrated wall according to the manufacturing types, and investigated on the basis of analysis to material characteristics and making techniques. Analytical samples were classified with lime-soil mixtures and soils, and interpreted the mixing characteristics of Sammul based on types of tomb barrier. The tomb barrier which is directly effect to control the inner environment was made with high content of lime. But the finishing or bottom layer were made with low content of lime. Overall the LSMB with integrated wall has higher content of lime and physical property than the LSMB with layered wall. The soil which was compounded as a Sammul and collected near the Gungri Site had similar with mineralogical and geochemical characteristics. Therefore, it is presumed that the fine sand and yellow ocher that made as a Sammul, were used with soil that was distributed around the site. Meanwhile, large scale limestone quarry is distributed near the site. Especially, Gungri Site has a possibility of material supply through water transport, due to the sea route from Asan bay is connected near the site. Thus, there is the possibility of transportation of lime materials from nearby quarry.

• Geomechanics and Engineering
• /
• v.36 no.5
• /
• pp.465-474
• /
• 2024

Uniaxial compressive strength (UCS) is a critical geomechanical parameter that plays a significant role in the evaluation of rocks. The practice of indirectly estimating said characteristics is widespread due to the challenges associated with obtaining high-quality core samples. The primary aim of this study is to investigate the feasibility of utilizing the gene expression programming (GEP) technique for the purpose of forecasting the UCS for various rock categories, including Schist, Granite, Claystone, Travertine, Sandstone, Slate, Limestone, Marl, and Dolomite, which were sourced from a wide range of quarry sites. The present study utilized a total of 170 datasets, comprising Schmidt hammer (SH), porosity (n), point load index (Is(50)), and P-wave velocity (Vp), as the effective parameters in the model to determine their impact on the UCS. The UCS parameter was computed through the utilization of the GEP model, resulting in the generation of an equation. Subsequently, the efficacy of the GEP model and the resultant equation were assessed using various statistical evaluation metrics to determine their predictive capabilities. The outcomes indicate the prospective capacity of the GEP model and the resultant equation in forecasting the unconfined compressive strength (UCS). The significance of this study lies in its ability to enable geotechnical engineers to make estimations of the UCS of rocks, without the requirement of conducting expensive and time-consuming experimental tests. In particular, a user-friendly program was developed based on the GEP model to enable rapid and very accurate calculation of rock's UCS, doing away with the necessity for costly and time-consuming laboratory experiments.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.555-568
• /
• 2004

The demand of aggregate resources in Korea has been increased with a rapid economic growth since the 1980s. About 25% of the total aggregate production is derived from riverine aggregates, 20% to 25% from marine sands, 40% to 45% from crushed aggregate and the rest 5% to 15% from old fluvial deposits. The abundance of crushed coarse aggregates varies in the uniform distribution of country, but in general it can be concentrated in the most densely populated areas, five main cities. Typical rock types of the Korean crushed stones are classified as plutonic rocks of 27%, metamorphic rocks of 32%, sedimentary rocks and volcanic rocks of 18%, respectively. The most abundant coarse aggregate used in the country is obtained from granite (25% of total) and subordinately gneiss (20%), sandstone (10%) and andesite (10%). Although rock types using as dimension stone are only fifteen, those as aggregate amount up to twenty nine rocks. These rocks consist of plutonic rocks such as granite, syenite, diorite, aplite, porphyry, felsite. dike and volcanic rocks such as rhyolite, andesite, trachyte, basalt, tuff, volcanic breccia and metamorphic rocks such as gneiss, schist, phyllite, slate, meld-sandstone, quartzite, hornfels, calc-silicate rock, amphibolite. And sandstone, shale, mudstone, conglomerate, limestone, breccia, chert are main aggregate sources in tile sedimentary rocks. The abundance of plutonic rocks is the highest in Chungcheongbuk-do, and decreases as the order of Jeollabuk-do, Gangwon-do and Gyeonggi-do. In Jeollanam-do, volcanic aggregates occupy above 50%, on the contrary sedimentary aggregates are above 50% in Gyeongsangnam-do.