• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.4
• /
• pp.426-433
• /
• 1988

A pot experiment was conducted to find out the effects of application of slacked lime and fused super-phosphate on the lead uptake of upland crops in a lead added soil. Lead concentration of the soils were adjusted to 0, 150, 300mg/kg respectively. The slacked lime was applied at the equivalent amount of lime requirement with extra 150kg/10a, and 2 times for the fused superphosphate. The results obtained were as follows: 1. Lead contents in crops increased in the order: sesame > maize > potato > sweet potato > soybean > green perilla > peanut > red bean. 2. Lead contents in parts of crops were increased in the order; root > stem > leaf > grain. 3. Increasing lead concentration in soils, lead content in the plant was increased and crops yield were decreased. 4. Lead contents in soybean and green perlilla were decreased in slacked lime application treatment. 5. The lead contents in leaf and grain of soybean and green perllila decreased with decreasing in the ratio of Pb/Ca+Mg equivalent in soil. 6. Grain yield were increased in slacked lime, but were decreased in fused superphosphate application treatment. 7. With increasing the soil Pb contents, calcium and phosphate contents were increased in leaf and stem, but calcium was decreased in roots. 8. $1N-NH_4$ OAC soluble Pb contents in soil were 26-50 ppm and 42-70 ppm, respectively, for 150mg/kg and 300mg/kg lead treatments. 9. The soil pH was increased in the order of slacked lime, fused superphosphate and nontreatment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.219-224
• /
• 1991

An acid tolerant R. meliloti "YA03" which was characterized through both acidified tube and pot soil experiment, was examined on its inoculation effect to alfalfa[Medicago sativa (L.)]cv. Vernal on hilly acid soil. It was conducted for 2 years to evaluate inoculation residual effect and there were two-fertilizer factors of nitrogen(0.8kg/10a) and lime(0,162kg/10a)as urea and $Ca(OH)_2$, respectively. The results obtained were summarized as follows : 1. In the 1st-year experiment, YA03 inoculated without nitrogen and lime application showed higher symbiotic effectiveness than check strains, YA026 and Rm2011 in nodule mass, $N_2$-fixing activity, and dry matter yield, but with N 8kg/10a application lower effectiveness than Rm2011. 2. In the 2nd-year experiment, Alfalfa dry matter yield by YA03 inoculation with N application(without lime) was 74% higher than that(276 kg/10a) in the 1st year, and the value showed 166%, 20%, and 21% increments as compared with noninoculated control(180kg/10a). YA026(399kg/10a), and Rm2011(397kg/10a), respectively. 3. In the 2nd-year experiment of N applicated plote(without lime), especially, YA03 showed higher shoot nitrogen(7.7kg N/10a/Yr.) fixed and soil rhizobial population($1{\times}10^4\;cells/g.\;soil$) than check strains. 4. On the basis of lime application, application effect of three major fertilizers with YA03 inoculation on alfalfa yield and soil rhizobial population was in the order of $N+P_2O_5+K_2O>P_2O_5+K_2O>P_2O_5+K_2O$. 5. On the whole, alfalfa yield by acid tolerant R. meliloti YA03 inoculation on hilly acid soil was enhanced with nitrogen application, and besides it appeared 44% higher with lime than without lime.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.529-536
• /
• 2011

In this study, we confirmed that the SWRO(Sea Water Reverse Osmosis) production water has more hard corrosiveness than the tap water by fundamental experiment. According to the result, the target of this study was aimed at developing maintenance and anti-corrosion method. In the early stages of the research, batch tests using mild steel coupons and electrochemical experiments were applied to compare the corrosiveness between SWRO production water and the tap water. After then, two corrosion control methods for SWRO production water were applied. Liquid lime($Ca(OH)_2$) and Carbon Dioxide($CO_2$) were inserted and compared with the combination of liquid lime with phosphate corrosion inhibitor and carbon dioxide. The water qualities were evaluated through LSI(Langelier Saturation Index) and proper injection ratio was deduced by the result. Since then, simulated loop system test were performed to evaluate anti-corrosion effect depending on corrosion inhibitors. Subsequently, carbon steel pipes equipped at the loop system were detached for SEM, EDX and XRD analysis to acquire quantitative and qualitative data of the major corrosion products inside the pipes. In conclusion, the controled groups with anti-corrosion techniques applied were effective by appearing 97.4% and 90.9% of improvements in both case of liquid lime and the liquid lime with a phosphate corrosion Inhibitor. furthermore, major components of scale were iron oxides, on the other hand, protective effect of film formation by calcium carbonate($CaCO_3$) could be confirmed.

• Korean Journal of Materials Research
• /
• v.23 no.10
• /
• pp.599-605
• /
• 2013

CSA, a cement mineral compound that is mainly composed of $3CaO{\cdot}3Al_2O_3{\cdot}CaSO_4$, generates ettringite as a hydration product after a reaction with glass (lime), gypsum and water to speed up the hardening process and enhance the strength and degree of expansion. When used as a cement admixture, there is increased production of ettringite, which can improve the initial strength in the first three days and ameliorate the reduction in the initial strength caused by the use of fly ash in particular. In this study, a hydrate analysis was performed using XRD and SEM after substitution with fly ash (30%) and CSA (8%) with the goal of observing the effect of CSA on the initial strength of a cement mixture containing fly ash. The results of the analysis showed that an addition of CSA promoted the production of ettringite and improved the initial strength, resulting in the generation of hydrates, which can effectively enhance the long-term strength of these materials.

• Journal of the Korean Ceramic Society
• /
• v.51 no.2
• /
• pp.132-137
• /
• 2014

The study was performed with low-grade limestone, which is used to make cement or is disposed of due to its low CaO content. In this study, the optimal condition of limestone with which to manufacture precipitated calcium carbonate (PCC) and limestone in fiber was determined through in-situ reactions. The best firing condition is with slaked lime with rapid cooling after 2 h of firing at $1000^{\circ}C$. In addition, the content of CaO can be increased by sorting the low-grade limestone using a 200 mesh filter, and the optical quality of old newspaper (ONP) was similar when using both low-grade and high-grade limestone. Also, controlling the particle size of PCC is an important factor pertaining to the optical characteristics of paper.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.4
• /
• pp.640-647
• /
• 1996

It has been found that an white precipitates at the inside surface is a common characteristics of soda-lime-silica glasses which have not undergone special surface treatments during hot weather season. In this study, the white deposits were examed using by solution method, surface analysis etc., and the dependence of weathering on the atmospheric condition was also investigated. As a results, the white precipitates on the glass surface was discorved as carbonates like $Na_2CO_3{\cdot}H_2O,CaCO_3$. Coming to atmosphere-dependence, it was shown that the glass made and stored at sea shore province had 3 times much severe weathering than that at land province.

• Korean Journal of Metals and Materials
• /
• v.46 no.7
• /
• pp.437-442
• /
• 2008

The synthesis and hydration of Calcium Sulfo Aluminate[$3CaO{\cdot}3Al_2O_3{\cdot}CaSO_4(C_4A_3{\overline{S}})$, CSA cement utilizing secondary steelmaking refining slags is studied for recycling the discarded steel plant wastes to meet the environmental requrations imposed on the steel industry. Raw materials of secondary refining slag, lime sludge, gypsum and bauxite were prepared to be sintered at $1,250^{\circ}C$. The sintered samples were hydrated for 1, 3 and 7 days to evaluate the mineralogical and physico-mechanical properties. The hydration products evaluated with the aid of SEM and XRD analyses confirmed the formation and the continuing growth of ettringite phase with the further hydration times, which plays a role in developing the early strength and the expansion properties of cements. The physico-mechanical properties of hydrated CSA products employing the recycled steelmaking refining slags determined in terms of compressive strength and linear expansion of hydrated products are found to be superior to those of the Ordinary Portland Cement(OPC) or the other commercial CSA cements.

• Resources Recycling
• /
• v.30 no.5
• /
• pp.10-16
• /
• 2021

In this study, a clinker was prepared using raw materials with CaCl₂. The characteristics of the chlorine-added clinker and cement were analyzed. The clinker modulus were set to Lime Saturation Factor (LSF) 92, Silica modulus (SM) 2.5, and Iron Modulus (IM) 1.5. The physical properties of cement using the chlorine-containing clinker were characterized. As the chlorine content increased, the free-CaO content in the clinker decreased, and that in the 2000 ppm clinker was reduced by approximately 40% compared to that in the 0 ppm clinker. There was an increase in the amount of chlormayenite, with a content of up to 3.4% present in the 2000 ppm clinker. The amounts of alite and belite also slightly increased. The compressive strength of mortar at 3 days and 7 days increased as the chlorine content increased. This trend was presumed to arise from the effect of hydration, which was promoted by the presence of chlorine. The compressive strength of 1000 ppm mortar increased by approximately 20% compared to that of 0 ppm mortar.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.445-458
• /
• 2010

The deterioration and structural damage such as exfoliation, cracks, and separation of painted layer on the wall paintings of Maitreya Hall in Geumsan-sa temple have been accelerated since it was re-positioned to the original place after the dismantling from the building in 1993. The examination of which result and analysis described in this study, is a preliminary survey for establishing conservation plan of the wall paintings. It aimed at the understanding of the physical and chemical characteristics of the materials applied in the 1993 conservation. The research focused on the south walls which displayed the worst condition compared to other walls. Samples for the examination for the understanding of micro-structure, chemical composition, cristalisation, and particle distribution, were collected for finishing, middle, and consolidated layers of the walls between pillars and the ones between brackets. Those samples were collected from separated fragments of the walls. The sample analysis displayed that: 1. the 1993 conservation used the similar type of weathered soil as the original for the finishing layer, and such soil and sand for the middle layer; 2. those walls are composed of a group of mineral particles which are relatively equal in size and shape and in their distribution; 3. the mineral particles were cohered forming solid aggregate due to the application of acrylic resin for the reinforcement on the wall. The main composition of crystalisation on the first and the second reinforcement layers of the back walls were lime plaster ($CaSO_4{\cdot}2H_2O$). The overall examination confirmed that the priority of the future conservation treatment should be given to the removal of the first and the second layers of reinforcement and the treatment on the back walls which were partially consolidated.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.2
• /
• pp.159-166
• /
• 1999

This study was conducted to investigate the effects of application of the dolomite particle and the shell powder on soil characteristics, dry matter yield and nutritive value of forages in loam soil at the experimental field of National Livestock Research Institute, Suwon, from 1994 to 1996. Application treatments were control, lime, dolomite 0.5, 2.0, 4.0mm, and shell powder in mixed pasture. Rate of dust occurrence was greatly decreased according to dolomite application and the dissolving rate in soil was highest in shell powder application among treatments. Although there was no significant difference, average dry matter yield of forages for 3 years was slightly increased with the application of lime, shell powder, dolomite 0.5mm, 4.0mm, 2.0mm and control in order. Both Ca and Mg contents of forages were no differences among treatments in 1994. However, all treatments were higher than those of control in 1995. And K and Na contents of forages were no differences among treatments. Lime requirement was greatly increased from 2,630 to 6,150kg per ha with the lapse of time. Although soil hardness was optimum level at first, it was likely to become hard little by little after treatments. Solid phase of soil was lowered a little except for control. Organic matter and available $P_2O_5$ contents of soil were highest in shell powder application among treatments, and K, Ca and Mg contents of soil were no differences among treatments. Ca content was increased a little in 1995, but decreased a little in 1996 compared to that of soil before treatments in 1994. AIso, Mg content was lowered than that of soil before experiment in 1995 and 1996. The results demonstrated that use of dolomite and shell powder as lime substitutes could be reduced dust problem and coast pollution as well as soil improvement. Therefore, it is desirable to apply the dolomite and the shell powder every 3 years in loam soil.