• Journal of the Korean Ceramic Society
• /
• v.34 no.5
• /
• pp.491-499
• /
• 1997

High flexible lightweight composites containing tobermorite as a main mineral is produced using various amorphous silicates, lime, cement and fibers. Here, Mechanical properties of the composites were studied by observing microstructures of hydrates and fibers. Amorphous silicates having better hydraulicity retarded the crystallization of tobermorite due to better formation of C-S-H gel in water bath curing, but, difficult conversion from C-S-H gel to tobermorite in hydrothermal reaction. In the low molar ratio of CaO/SiO2 (0.67), faster crystalization was observed dued to more impurities such as Al2O3 alkali, resulting in improving mechanical properties due to small crystal size and many contact points. It was identified that a lot of calcium silicate hydates formed at surface of pulps increase bonding strength and the crack-resistance of matrix in the composites, but decrease hardness and compressive strength. The choice of amorpous silicates having better hydraulicity, low CaO/SiO2 adding each fibers bellow about 5% in the raw mixs and lower molding pressure should be needed at improve mechanical properties of composites.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.2
• /
• pp.218-226
• /
• 2013

This experiment was conducted to evaluate the intake, nutrient apparent digestibility and the effect of total collection days (two and four days) on apparent digestibility estimates for lambs fed diets containing sugar cane treated with calcium oxide (CaO). Eight Santa In$\hat{e}$s castrated male lambs with a $16.6{\pm}1.8$ kg body weight were used. The lambs were distributed in two $4{\times}4$ Latin squares, with four experimental periods of 14 d each. The animals were kept in 1.2 $m^2$ individual pens, and the intake and digestibility evaluations were performed during the last four days of each period. The diets were formulated to be isonitrogenous, containing 14% crude protein (CP), and presenting 70% sugar cane treated with 0, 0.75, 1.5 or 2.25% of CaO (as-fed basis), corrected with 1% urea, and 30% concentrate. The sugar cane with added CaO was chopped, treated, and offered to the animals after 24 h of storage. The sugar cane with CaO increased the DM, OM, CP, NDF, NDFap, TC, NFCap and TDN intake (kg/d), when compared to natural sugar cane, and produced the same intake expressed as a percentage of body weight (% BW). The NFCap digestibility of the CaO-treated sugar cane was inferior to the NFCap digestibility in natural sugar cane. There was a linear increase in the DM intake with the CaO-added sugar cane, but the DM and NDF digestibility and the TDN content decreased linearly. The chemical treatment of sugar cane with CaO increases the intake but does not improve the nutrient digestibility. Two days of total fecal collection were found to be sufficient to estimate the total apparent digestibility in lambs.

• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.104-109
• /
• 2004

The characteristics and composition of the ancient glasses excavated at Songdong-ri, Sangju, Kyongsangbuk-do were analyzed using Scanning Electron Microscope attached with Energy Dispersive Spectrometer. As the results, the glass beads of Songdong-ri showed that there were changed the composition, the color and types according to the periods. There were appeared potash and soda glass group at A.D.4 century and potash and mixed alkali glass group at A.D. 17 century. The potash glasses of A.D. 4c. were colored blue and contained low $Al_2O_3$ and CaO composition as below $5\%$. The soda glasses of This period were colored blue and red, and contained $Al_2O_3$ composition as upper $5\%$. But the potash glasses of A.D.17c. showed the transparent yellow color and considerably higher CaO, $11.7\%$. 'Coil glasses' typed unique were colored yellow-brown, Cu-blue and colorless, were classified the mixed alkali glass as upper $5\%\;of\;Na_2O\;and\;K_2O$. The composition of coil glasses were presented first at this study.

• Resources Recycling
• /
• v.10 no.3
• /
• pp.37-42
• /
• 2001

Current iron and steelmaking operation was re-evaluated on the basis of slag engineering technology to optimize slag operations. In blast furnace process, increase in the basicity of slags (C/S) could obtain progressed fluidity and hot metal quality. COREX process would be stabilized in view of slag fluidity and hot metal quality by reducing input content of $SiO_2$and $A1_2$$O_3$In STS-AOD process, addition of small amount of lime could improve refining capacity of the slag; also calcium aluminate flux could be taken into account as a potential substitute for fluorspar, without degradation of operation efficiency and steel quality.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.497-508
• /
• 2017

This study was carried out to document and diagnose the conditions of the seated stone statue of Buddhist Master Seungga in Seunggasa temple immediately after its conservation treatment, which was found to be long covered in surface of white materials. The stone Halo was researched along with the Statue, and basic data was secured through precisely examination and nondestructive diagnosis. The result from the surface deterioration evaluation shows that both the Statue and Halo had a little bit of physical deterioration, although their level of chemical deterioration was proportionally higher due to discoloration. The physical property diagnosis using ultrasonic measurements on the Statue and Halo showed that the average ultrasonic velocity was found to be 3,570 m/s and 3,373 m/s, respectively, which corresponds to grade III, an indication of a favorable physical property. The surface covered materials were detected to be Ca, Ti, Pb, Fe, Al and Si, emanating from Hobun (Oster shell powder; $CaCO_3$) or lime ($CaO{\cdot}Ca(OH)_2$) and silicate minerals. Furthermore, Ti and Pb seems to be the component of the white coloring pigments, titanium white ($TiO_2$) and white lead ($2PbCO_2{\cdot}Pb(OH)_2$). Therefore, the seated stone statue of Buddhist Master Seungga is presumed to be painted with Hobun or lime and thereafter painted over with titanium white and white lead.

• Journal of Korean Society on Water Environment
• /
• v.26 no.6
• /
• pp.919-925
• /
• 2010

The features of precipitating reaction of fluoride have been examined by employing waste gypsum as a precipitant. The major component of waste gypsum was examined to be CaO with minor components of $SO_3$, $SiO_2$. In the experimental condition, the precipitating reaction of fluoride progressed rapidly within a few minutes after the reaction started and reached its equilibrium in 10 minutes. Kinetic analysis showed that the precipitating reaction of fluoride generally followed a first Oder and second Oder with decreasing rate constant with the initial dosage of precipitant. XRD analysis showed that the crystalline structure of precipitate was mainly $CaF_2$ with partly $Ca_5(PO_4)_3(OH)$.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.1
• /
• pp.82-90
• /
• 2011

Reactive reductants of cement/Fe(II) systems in dechlorinating chlorinated hydrocarbons have not been identified. The previous studies showed that a hematite/CaO/Fe(II) system had TCE degradation characteristics similar to those of cement/Fe(II) systems with regard to degradation kinetics and that lime (CaO) plays an important role in enhancing the reactivity for TCE dechlorination. The current study shows identified the formation of gypsum ($CaSO_4$) in the hematite/CaO/$FeSO_4$ system through the XRD analysis. The amounts of the gypsum increased with increment of the initial CaO dose. However, when CaO in the hematite/CaO/$FeSO_4$ system was replaced with gypsum, TCE degradation was not observed. Ca-removed Portland cement extracts (CPCX) in combination with $FeSO_4(CPCX/FeSO_4)$ showed no TCE degradation. On the other hands, the Portland cement extracts (PCX) in the presence of $FeSO_4(PCX/FeSO_4)$ and CPCX/CaO/$FeSO_4$ systems degraded 0.2 mM TCE within 5 days, indicating that CaO also played an important role dechlorination reactions in the systems. The pseudo-first-order rate constants (k) of the CPCX/CaO/$FeSO_4$ systems were 0.20, 0.24, and 0.72 $day^{-1}$, when the CaO dosages were 25, 50 and 75 g/L, respectively. The XRD analyses showed identified the common peaks having the d-values of 3.02, 2.27, and 1.87 in the reaction systems that showed TCE degradation. However, it was not possible to clearly identify the crystalline minerals having the three peaks from the references in JCPDS cards. This study reveals that the reactive agents in the cement/Fe(II) and the hematite/Fe(II) systems are likely to be those containing CaO and Fe(II).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.4
• /
• pp.431-438
• /
• 1983

Experiments were conducted to know the effects of 15 years successive application of fertilizers and organic matters on the soil properties, plant growth and yield of rice. Application of fertilizers and organic matters for 15 years in same plots were increased soil pH, OM, and CEC, but decreased $SiO_2$ and Ca content in paddy soil. Organic matter application for 15 years was increased OM about 0.5% compare to non-applied plot. Particulary lime application was increased soil pH, $SiO_2$, Ca and CEC in paddy soil. NPK+compost and NPK+straw application were increased number of panicles and number of spikelets per unit area, but decreased ripening ratio compare to NPK applied plot. Average grain yield for 15 years in the non-fertilized, -N, -P, -K, NPK+compost, NPK+straw and NPK+lime applied plot was 47, 51, 88, 95, 113, 117, and 106% of yield conpare to NPK applied plot, respectively.

• Journal of Conservation Science
• /
• v.8 no.1 s.11
• /
• pp.10-15
• /
• 1999

The chemical compositions and microstructure of the punch'ong excavated from Bokwangri, Kangnung were investigated by the scanning electron microscope (SEM) with an energy dispersive X-ray spectrometer (EDS), X-ray diffractometer (XRD), and dilatometer. The compositions of body were $SiO_2(73-78\%),\;Al_2O_3(13-16\%)$, $RO{\cdot}R_2O(4-5\%,\;R=Ca,\;Mg,\;Na,\;K),\;R_xO_y(3-6\%,\;R=Fe,Ti)$ in weight ratio, which were higher silica and flux $(RO{\cdot}R_2O)$ but lower alumina. Owing to the high content$(21-30\%)$ of calcium oxide the glaze is considered lime type. Firing temperature range for the ceramic was presumed to about $1150^{\circ}C$.

• Journal of Energy Engineering
• /
• v.27 no.1
• /
• pp.51-58
• /
• 2018

In this paper, we reported that the influence of advanced functional mineral filler calcium carbonate ($CaCO_3$) extracted from oyster shell waste, which are rich mineral sources of $CaCO_3$. Oyster Shells, available in abundance, have no eminent use and are commonly regarded as waste. Their improper disposal causes a significant level of environmental concern and also results in a waste of natural resources. Recycling shell waste could potentially eliminate the disposal problem, and also turn an otherwise useless waste into high value added products. Oyster shell waste calcination process to produce pure lime (CaO) which have good anti-microbial property for waste water treatment and then focuses on its current applications to treat the coffee waste and its effluents for biological treatment and utilization as a fertilizers.