• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.225-228
• /
• 2008

This study shows that lignocellulosic biomass saccharification work has been carried out with rice-straw by the extracellular enzyme from KMU001, and the enzymes produced in 5%(w/v) wood biomass were characterized by protein and various enzyme activity measurements. Several cellulases such as Endoglucanase(EG), $\beta$-D-1,4-Glucosidase(BGL), Cellobiohydrolase(CBH), and $\beta$-D-1,4-Xylanase (BXL) were detected. Saccharification of rice-straw by the enzyme yielded about 233mg/g of glucose after 48hrs.

• Journal of Forest and Environmental Science
• /
• v.36 no.2
• /
• pp.69-77
• /
• 2020

Lignocellulosic biomass has recalcitrant characteristics against chemical and biological conversion due to its structural heterogeneity and complexity. The pretreatment process to overcome these recalcitrant properties is essential, especially for the biochemical conversion of lignocellulosic biomass. In recent years, pretreatment methods using ionic liquids (ILs) and deep eutectic solvents (DESs) as the green solvent has attracted great attention because of their advantages such as easy recovery, chemical stability, temperature stability, nonflammability, low vapor pressure, and wide liquids range. However, there are some limitations such as high viscosity, poor economical feasibility, etc. to be solved for practical use. This paper reviewed the research activities on the pretreatment effect of various ILs including DESs and their co-solvents with organic solvents on the enzymatic saccharification efficiency of lignocellulosic biomass and the nanocellulose preparation from the pretreated products.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.864-871
• /
• 2016

This study was conducted to compare and analyze gross calorific values from measurement methods of lignocellulosic biomass and calculation data from calorific value prediction models based on the elemental content. The deviation of Liriodendron tulipifera (LT) and Populus euramericana (PE) was shown 7.7 cal/g and 7.4 cal/g respectively in palletization method, which are within repeatability limit 28.8 cal/g of ISO FDIS 18125. In the case of Thailand charcoal (TC), nontreatment method and palletization method was satisfied with repeatability limit as 22.8 cal/g and 8.8 cal/g respectively. Seowon charcoal (SC) was shown deviation of 11.4 cal/g in nontreatment method, because the density and chemical affinity of sample increases as the carbon content increases from heat treatment at high temperature in the case of TC and SC. In addition, after applying the elemental content of each of these samples to the calorific value prediction models, the study found that Model Equation (3) was relatively consistent with measured calorific values of all these lignocellulosic biomass. Thus, study about the correlation between the density and size of particle should be conducted in order to select the measurement method for a wide range of solid biofuels in the future.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.2
• /
• pp.241-252
• /
• 2016

Cellulose acetate is one of well-known industrial materials which have various commercial uses. We treated the lignocellulosic biomass using two-step (steam explosion-chemical) reaction followed by acetylation to get the cellulose acetate in this study. The two-step treatment was done to improve the yields of acetylation of the substrates. The yields of the cellulose acetate were about 88.4, 88.1, and 151.7% in barley straw, rice straw, and oak tree, respectively. Also the degree of substitution (DS) of the acetates was 2.1 to 2.5 in the biomass. We found that the biomass were valuable cellulosic sources, including their derivatives, in this study. This means that the biomass can be converted into the high-valued cellulosic stuff.

• Journal of computational fluids engineering
• /
• v.16 no.2
• /
• pp.94-101
• /
• 2011

The fast pyrolysis characteristics of lignocellulosic biomass are investigated for a bubbling fluidized bed reactor by means of computational fluid dynamics (CFD). To simulate multiphase reacting flows for gases and solids, an Eulerian-Eulerian approach is applied. Attention is paid for the primary and secondary reactions affected by gas-solid flow field. From the result, it is scrutinized that fast pyrolysis reaction is promoted by chaotic bubbling motion of the multiphase flow enhancing the mixing of solid particles. In particular, vortical flow motions around gas bubbles play an important role for solid mixing and consequent fast pyrolysis reaction. Discussion is made for the time-averaged pyrolysis reaction rates together with time-averaged flow quantities which show peculiar characteristics according to local transverse location in a bubbling fluidized bed reactor.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.3
• /
• pp.297-302
• /
• 1999

Simultaneous saccharification and fermentation (SSF) experiments were carried out with a lignocellulosic biomass. The effects of temperature on enzymatic saccharification and the ethanol fermentation were also investigated. The batch SSF process gave a final ethanol concentration of 10.44 g/l and equivalent glucose yield of 0.55 g/g, which was increased by 67％ or higher over the saccharification at 42℃. The optimal operating condition was found to vary in several parameters, such as the transmembrane pressure, permeation rate, and separation coefficient, related to the SSF combined with membrane system (semi-batch system). When the fermentation was operated in a semi-batch mode, the efficiency of the enzymes and yeast lasted three times longer than in a batch mode.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.12-12
• /
• 2023

Plant biomass, or lignocellulose, is one of the most abundant natural resources on earth. Lignocellulosic biomass, such as agricultural and forestry residue, serves as a renewable feedstock for microbial cell factories due to its low price and abundant availability. However, the recalcitrance of lignocellulosic biomass requires a pretreatment process prior to microbial fermentation, from which fermentable sugars including xylose and glucose are generated along with various inhibitory compounds. The presence of furan derivatives, such as 5-hydroxymethyl-2-furaldehyde and 2-furaldehyde (furfural), hampers the microbial conversion of lignocellulosic biomass into value-added commodities. In this study, furfural tolerance was improved by investigating the detoxification mechanism in non-model yeast. The genes encoding aldehyde dehydrogenases were overexpressed to enhance furfural tolerance and resulted in improving cell growth and lipid production that can be converted into biofuel. Taken together, this approach contributes to the understanding of the reducing toxicity mechanism of furfural by the aldehyde dehydrogenases and provides a promising strategy that the use of microorganism as an industrial workhorse to treat efficiently lignocellulosic biomass as sustainable plant derivatives.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2017

The production of high-value chemicals from natural resources as an alternative for petroleum-based products is currently expanding in parallel with biorefinery. The use of lignocellulosic biomass as raw material is promising to achieve economic and environmental sustainability. Filamentous fungi, particularly Aspergillus species, are already used industrially to produce organic acid as well as many enzymes. The production of lignocellulose-degrading enzymes opens the possibility for direct fungal fermentation towards organic acids such as itaconic acid (IA) and fumaric acid (FA). These acids have wide-range applications and potentially addressable markets as platform chemicals. However, current technologies for the production of these compounds are mostly based on submerged fermentation. This work showed the capacity of two Aspergillus species (A. terreus and A. oryzae) to yield both acids by solid-state fermentation and simultaneous saccharification and fermentation. FA was optimally produced at by A. oryzae in simultaneous saccharification and fermentation (0.54 mg/g wheat bran). The yield of 0.11 mg IA/g biomass by A. oryzae is the highest reported in the literature for simultaneous solid-state fermentation without sugar supplements.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.1-5
• /
• 2016

For obtain fermentable sugar, we conducted acid hydrolysis with lignocellulosic biomass without enzyme. The lignocellulosic biomass used pinus rigida and Palm residues (EFB; empty fruit bunches). In the acid hydrolysis, we consider the hydrolysis condition to reduce a denatured sugar. So this study was conducted 2-step acid hydrolysis. First-step hydrolysis used high concentration (72 wt%) sulfuric acid at $80^{\circ}C$. At the condition, we obtained 11.49 wt%, 32 wt% glucose conversion for pinus rigida and EFB. After the step, the liquor was dilute until 9~15 wt% acid concentration and conducted second hydrolysis at $50{\sim}120^{\circ}C$. In the second hydrolysis, we obtained maximum glucose conversion (pinus rigida 86.8 wt% (39 g/L) and EFB 95.3 wt% (32.4 g/L)) at 9 wt% acid concentration and $120^{\circ}C$ for 80 min. All samples through the process are analyzed on the basis of mass balance.

• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.135-144
• /
• 2016

Due to the high price volatility and environmental concern of petroleum, biofuels such as bioethanol produced from lignocellulosic biomass have attracted much attention. It is also expected that the amount of lignin residue generated from pretreatment of lignocellulosic biomass will increase as the volume of cellulosic bioethanol increases. Lignin is a natural aromatic polymer and has very complex chemical structures with chemical functional groups. Chemical modification of lignin such as oxypropylation and epoxidation has also been applied to the production of value-added bioplastics such as polyurethane and polyester with enhanced thermal and mechanical properties. In addition, lignin can be used for carbon fiber production in automobile industries. This review highlights recent progresses in utilizations and chemical modifications of lignin for the production of bioplastics, resins, and carbon fiber.