• Journal of The Korean Society of Grassland and Forage Science
• /
• v.30 no.1
• /
• pp.43-48
• /
• 2010

This study was conducted to compare the chemical composition, dry matter digestibility (DMD), dry matter intake, and utilization of nitrogen and energy of dairy goats (Saanen), when fed on imported timothy hay (IT), mixture grass hay (MG) and native grass hay (NG), respectively. The experimental trials were conducted from April, 2008 to December, 2008 at the environmental controlled barn of Chungnam National University. Twelve dairy goats (Saanen) were selected which had nearly the same body weight (24.2kg, male). The content of crude protein (CP) of MG hay was higher than that of other diets (p<0.05), but the contents of NDF, ADF, cellulose and lignin of IT and NG diet were higher than those of MG diet (p<0.05). The voluntary DM intake of dairy goats fed with herbage from MG diet (30.7/$BW_{kg}$/day) was higher than that of other diets, but no significant difference was observed between that of IT diet and NG diet (p>0.05). The DMD of MG diet (69.8%) was higher than that of NG diet (62.2%) and IT diet (60.8%) (p<0.05), but no significant difference was observed between that of IT diet and NG diet (p>0.05). In nitrogen utilization, the apparently digested N %, retained % and biological value of dairy goats fed with herbage from MG diet were higher and TG diet was lower (p<0.05). In energy utilization, digestible energy and the energy of apparently digested minus urinary losses of MG diet were higher than those of IT diet and NG diet (p<0.05), but no significant difference was found between IT diet and NG diet (p>0.05). Based on the results, the dry matter intake, DMD and utilization of nitrogen and energy of dairy goats of MG were higher than those of IT diet and NG diet (p<0.05), the DMD and biological value (%) of NG diet was higher than that of IT diet (p<0.05).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.4
• /
• pp.388-397
• /
• 1985

Forage productivity and sequential changes in forage quality of four rye and two triticale varieties were studied. All the observed characteristics were similar among rye or triticale varieties, but they were different between rye and triticale varieties. Early growth of rye was better compared to triticale varieties, but at heading stage yield in dry weight, digestible dry matter and percent dry matter of triticale were higher compared to rye varieties. Heading stage of rye was earlier than that of triticale by 11 - 14 days. Triticale had longer and broader leaf blades and a higher leaf blade/total dry weight ratio compared to rye. Protein content decreased as plant growth advanced and it was higher in rye before heading, but it was similar after heading compared to triticale. Cellulose and lignin contents of rye increased through 20 days after heading. However, in triticale cellulose increased until heading stage and it levelled off, but lignin content increased rapidly after heading. Among the crude fibers, only acid detergent fibers(ADF) was negatively correlated with in vitro dry matter digestibility(IVDMD) in both rye and triticale. IVDMD of rye decreased rapidly after heading, but it was maintained as high as heading stage up to 15 days after heading in triticale. Protein content and IVDMD in leaf blades were higher than those of culm + leaf sheath, hemicellulose was similar, and cellulose, lignin, and ADF in leaf blades were lower compared to culm + leaf sheath. In the early and middle part of April rye was superior to triticale as a soiling crop because of a better plant growth of rye under the low temperature conditions, but in the later part of April and early part of May triticale was superior to rye because of a rapid decreased in IVDMD of rye after heading and a late maturing characteristics of triticale. Planting both rye and triticale could prolong the utilization period of the soiling crops and increase in yield with better quality compared to a single crop of rye or triticale.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.3
• /
• pp.63-69
• /
• 2012

The rice husk is one of the major agricultural residue in KOREA. In this paper, the effects of various pulping conditions on the properties of rice husk pulp and handsheets made of rice husk fiber were evaluated in order to utilize the rice husk as an alternative source for wood pulp. Two typical alkali pulping, such as soda pulping and Kraft pulping were applied with various conditions of the pulping processes. The higher effective alkali and higher pulping temperature resulted in the higher efficiency in removal of lignin and ash, which leaded to the higher strength properties of handsheets made of rice husk fiber, but the lower yield of rice husk pulp. The better efficiency in production of rice husk pulp and the stronger handsheets were obtained by the Kraft pulping.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.2
• /
• pp.358-370
• /
• 1994

Plant cell walls consist of a variety of chemical constituents such as cellulose, humicelluloses, pertins, lignin, glycoproteins, etc. These components are strongly linked through hydrogen , covalent, ionic and hydrophobic bondings, which thus confers the self-protection capability on plants. Some processing by-products (hulls, brans, pomaces) of cereal, fruits and vegetables are very limited in further utilization due to their compact structural rigidity. In view of the fact that the plant cell walls are essentially composed of dietary fiber components , solubilization of the strong intermolecular linkage s can contribute to increasing the soluble dietary fiber content and thus diversifying the functional and physiological role of plant cell walls as dietary fiber sources. This article reviews the chemical constituents of cereals, fruits & vegetables and brown seaweeds with reference to their intermoleuclar linkages. An particular emphasis will be placed on the solubilizing phenomena of rigid plant cell walls by extrusion and the resulting change of functional properties. It is suggested that underutilized food resources, typically exemplified by various food processing by-products and surplus seaweeds, can be successfully modified toward improved functional performance by extrusion.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.3
• /
• pp.339-346
• /
• 2019

L-Arabinose, a five carbon sugar, has not been considered as an important bioresource because most studies have focused on D-xylose, another type of five-carbon sugar that is prevalent as a monomeric structure of hemicellulose. In fact, L-arabinose is also an important monomer of hemicellulose, but its content is much more significant in pectin (3-22%, g/g pectin), which is considered an alternative biomass due to its low lignin content and mass production as juice-processing waste. This review presents native and engineered microorganisms that can ferment L-arabinose. Saccharomyces cerevisiae is highlighted as the most preferred engineering host for expressing a heterologous arabinose pathway for producing ethanol. Because metabolic engineering efforts have been limited so far, with this review as momentum, more attention to research is needed on the fermentation of L-arabinose as well as the utilization of pectin-rich biomass.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.90-97
• /
• 1988

The rate of utilization of the oak cork (bark of Quercus variabilis Blume) ranges only 40-50%. Therefore, this study was carried out to investigate the chemical properties of the oak cork for increasing the utility. 1) The contents of alkali extractives, organic solvent extractives and ash in the oak cork are similar to those of other barks, but hot and cold water extractives and lignin contents are lower than those of the wood. The carbohydrate (cellulose and hemicellulose) content of the oak cork is similar to that of other barks. The suberin contents in the first and the second bark of the oak cork are 34.8 and 32.2% respectively, in the dry weight. 2) Inorganic component contents of the first bark are similar to those of the second. The pH of the first and the second bark are 3.9 and 4.2%. The caloric values of the first and second bark are 6,263 Kcal/kg, and 5,828 Kcal/kg, respectively, and these caloric values are higher than those of other barks. The sclerencymatous cell content of the first bark which is related to the quality of the oak cork is lower than that of second bark, the contents of the sclerenchymatous cell and lignin show the positive correlation. 3) In the dimension of the cross sectioned cork cell, the first bark is bigger than that of the second. The shape of the cork cell is globular shape in the early bark and discoid shape in the late bark. The cross and the radial section are the same shape, but the tangential section shows difference from the other section.

• Microbiology and Biotechnology Letters
• /
• v.5 no.3
• /
• pp.127-131
• /
• 1977

Various kinds of native herbage grasses like-Miscanthus sinensis, Arundinella hirta, Cymbopogen geirngii, Themeda japonica etc. are widely distributed in every Korean mountain. So we investigated the availability of native grass, Miscanthus sinensis as a substrate for the production of S. C. P. The results were obtained as follows. 1) At the alkali treatment, NaOH was the most effective with the exclusion of lignin, and pretreated Miscanthus with NaOH appeared to be a good substrate for the microbial growth. 2) When Miscanthus was treated with one to 10％ NaOH, the microbial growth increased in proportion to the increased alkali concentration. Beyond 4％ NaOH, a slight increase was observed. 3) Phosphoric acid, as a neutralizer, was the most effective in cell production after alkali treatment. 4) On the effect of incubation time, the productivity was best found at 60 hours, and the cell weight was 9.23 mg per 1 ml, and the microbial digestibility of substrate was 75.2％.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.4
• /
• pp.66-73
• /
• 2000

Alkaline sulfite-anthraquinone(AS-AQ) cooking process has been applied to unground pine bark. The properties of the spent liquor such as molecular weight distributions, sulfonic equivalent weights, degree of sulfonation, phenolic hydroxyl groups and kaolin dispersing ability have been investigated to evaluate the possibility of using this liquor as concrete additives or binders. In the case of ground bark meal, more than 90% delignification was achieved at the optimal cooking conditions. However, applying these conditions on unground bark the delignification was slightly retarded. The decrease in the degree of delignification may be attributed to less penetration and diffusion of chemicals during the cooking of the bark. Increasing the cooking temperature only by $5^{\circ}C$ improved the delignification of the bark and about 90% delignification can be achieved. These results indicate that bark can be used successfully during AS-AQ cooking without any mechanical or physical pretreatment. The properties of lignin or polyphenol sulfonates in the spent liquor after AS-AQ cooking of the bark were compared with Sunflo-R, which is commercial lignosulfonate(CLS) prepared from wood. The weight average molecular weights(Mws) estimated by gel-filteration chromatography was found to be ranging from 1,200~1,800. These are considerably lower than those in CLS. Lignin or polyphenol sulfonates in the spent liquor of bark and CLS have similar degree of sulfonation, but the phenolic hydroxyl group was 1.8 times higher than CLS. Moreover, the dispersing abilities of the spent liquors were better than that of CLS, especially after 0.1% addition to kaolin suspension.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.3
• /
• pp.30-36
• /
• 1993

Wood chips of oak (Quercus mongolica) and larch (Larix leptolepis) were treated with a relatively low pressure steam(10~20 kg/$cm^2$) for 10~20 min (first-stage),and then increased pressure up to 30kg/$cm^2$ for 30 second (second-stage), and steam pressure was released intentionally to air. Main components of exploded wood were separated with 1% NaOH and hot water-methanol. In this work, the more effective low pressure explosion condition and separation method of wood main component were investigated. The results can be summarized as follows; 1. The yields of exploded wood were generally decreased with increasing steam pressure and reaction time. 2. The proper condition of steam explosion in low pressure for the separation of wood main components was 15kg/$cm^2$-10 min, in oak wood and 20kg/$cm^2$-10 min., then 30kg/$cm^2$-0.5 min, in larch wood. 3. The 23% of elude hemicellulose was obtained from the exploded oak wood which was treated with optimal condition. 4. In the case of hot water-methanol extraction, the ratio of delignification was 14~23% in the exploded larch wood and 42~55% in the exploded oak wood. 5. The methanol was more effective than 1% sodium hydroxide solution for extraction of lignin from exploded wood.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.69-76
• /
• 2012

The bamboo fibers from three Korean bamboo species, Moso, Henon and Timber bamboo, were prepared by disintegration after thermal treatment. The samples were prepared according to the age of growth; bamboo shoots, 20 days and 50 days of growth. The fiber quality was also investigated by morphological and chemical analyses. There was no big difference in the dry mass of fibers among the three bamboo species. However, the dry mass of fibers from 50 days of growth was increased by 34%, whereas it was ranged in 9-20% in the case of fibers from bamboo shoots and 20 days of growth. In the results of morphological analysis, the fibers could be classified as the fibers from metaxylem, the fibers from parenchyma and the fines produced during disintegration. The fibers from 50 days of growth were separated from metaxylem, whereas the fibers from bamboo shoots and 20 days of growth were mainly consisted of fibers from metaxylem and parenchyma. The chemical analysis of fibers showed that the contents of carbohydrates, lignin and extractives were not much affected by thermal treatment.