• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.103-104
• /
• 2012

Lately, minimize of the heat loss and fuel consumption when heating so that suggested ways to reduce carbon emissions as a measures to reduce for increase of carbon emission and find a way to apply highly insulated concrete as the measures. In this study, as a comparative experiments on heat conduction of concrete with lots of porous, thermal conductivity of concrete using foamed, polystyrene beads, lightweight aggregates, air-entraining agent and concrete using crushed stone measure and thermal conductivity of concrete with lots of porous compare and evaluate.

• 한국건설순환자원학회지
• /
• 제12권3호
• /
• pp.28-32
• /
• 2017

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.47.2-47
• /
• 2003

• 한국건설순환자원학회지
• /
• 제13권4호
• /
• pp.54-60
• /
• 2018

• 한국건설순환자원학회지
• /
• 제18권4호
• /
• pp.56-63
• /
• 2023

• Steel and Composite Structures
• /
• 제7권6호
• /
• pp.457-468
• /
• 2007

Analytical and experimental investigation on dynamic properties of extra lightweight concrete sandwich beams reinforced with various lay ups of carbon reinforced epoxy polymer composites (CFRP) are discussed. The lightweight concrete used in the core of the sandwich beams was made up of extra lightweight aggregate, Lica. The density of concrete was half of that of the ordinary concrete and its compressive strength was about $100Kg/cm^2$. Two extra lightweight unreinforced (control) beams and six extra lightweight sandwich beams with various lay ups of CFRP were clamped in one end and tested under an impact load. The dimension of the beams without considering any reinforcement was 20 cm ${\times}$ 10 cm ${\times}$ 1.4 m. These were selected to ensure that the effect of shear during the bending test would be minimized. Three other beams, made up of ordinary concrete reinforced with steel bars, were tested in the same conditions. For measuring the damping capacity of sandwich beams three methods, Logarithmic Decrement Analysis (LDA), Hilbert Transform Analysis (HTA) and Moving Block Analysis (MBA) were applied. The first two methods are in time domain and the last one is in frequency domain. A comparison between the damping capacity of the beams obtained from all three methods, shows that the damping capacity of the extra lightweight concrete decreases by adding the composite reinforced layers to the upper and lower sides of the beams, and becomes most similar to the damping of the ordinary beams. Also the results show that the stiffness of the extra lightweight concrete beams increases by adding the composite reinforced layer to their both sides and become similar to the ordinary beams.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권5호
• /
• pp.22-29
• /
• 2015

현대의 구조물은 고층화, 대형화 되어가는 추세이다. 보통중량 콘크리트는 강도에 비해 질량이 크기 때문에 구조물의 자중을 증가시킨다는 단점이 있다. 그러므로, 추세에 맞는 콘크리트의 경량화가 필요한 실정이다. 콘크리트의 경량화 방법 중 하나가 경량골재를 사용한 경량골재 콘크리트이다. 하지만, 국내에서는 경량골재 콘크리트에 대한 인식부족으로 인하여 구조용 경량골재 콘크리트에 대한 연구가 부족한 실정이다. 경량골재 콘크리트에 사용되는 경량골재의 품질에 따라 콘크리트의 물성 및 강도에 대한 검증이 필요하다. 본 연구에서는 보통골재와 경량골재를 사용한 콘크리트를 제작하고 인장균열파괴실험을 통해 하중-CMOD곡선은 얻고, 이를 역해석하여 파괴에너지를 도출하였다.

• 한국건축시공학회지
• /
• 제7권1호
• /
• pp.115-121
• /
• 2007

Ordinary concrete uses aggregate sufficiently soaked with water, and is weighed, mixed with other materials and placed in accord with performances required in the construction field. Recently special concrete with high fluidity and durability is required but it is difficult to use top-quality concrete due to lack of high-quality aggregate, delayed transportation because of traffic jam, etc. In addition, sometimes the use of a remicon is inevitable just for small-sized concrete constructions or it is difficult for a remicon to reach remote construction places such as mountainous areas. To solve these problems, this study attempted to pack concrete materials. In other words, it is to instantize concrete. This study dried aggregate, a material of concrete, and compared the change of absorption phase of the aggregate in water and in paste in order to examine the effect of the dryness of aggregate on its absorption rate and, based on the absorption rate, decided water addition ratio necessary for the reduction of unit quantity caused by the use of dry aggregate in designing concrete mixture, and analyzed the properties of unhardened concrete according to water addition ratio in manufacturing concrete using aggregate in the state of absolute dryness and in the state of surface dryness.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.380-383
• /
• 2004

The coarse and fine aggregates that make up the majority of concrete are resources. But, the raw naturals that make up concrete are our earth's resources and there is not a replenishable stock. Also industrial waste and life waste leaped into a pollution source. Therefore, as construction continue, quarries are exhausted and new sources must be discovered. The purpose of this paper is to investigate an application of recycled coal ash plastics in the construction field. The study examined the physical and mechanical properties of recycled coal ash plastics aggregate. In the results, although the absorption and specific gravity of SLAs increases slightly as the fly ash content increases, the compressive strength and modulus of elastic of concrete made with SLAs remains relatively constant when mortar type and volume fraction are also held constant. These values are always lower than natural-weight aggregate concretes.

• 농업과학연구
• /
• 제24권2호
• /
• pp.182-193
• /
• 1997

본 실험은 세골재로 퍼라이트와 조골재로 인공 경량골 재인 팽창점토와 경석을 사용하여 제조된 인공경량골재 콘크리트의 물리 역학적 특성을 구명하여, 이의 실제 사용여부를 검토하기 위하여 실시되었으며, 실험을 통하여 얻어진 결과를 요약하면 다음과 같다. 1. 물-시멘트비는 조골재로 팽창점토를 사용한 경우는 47%로 나타났고, 경석을 사용한 경우는 56%로 크게 나타났는데, 이는 사용조골재의 흡수율 차이에서 기인된 결과라 하겠다. 2. 단위중량은 조골재로 팽창점토를 사용한 경우는 $1.622kgf/m^3$, 경석을 사용한 경우는 $1,596kgf/m^3$으로 상당히 경 량성이 있는 것으로 나타났다. 3. 흡수율은 팽창점토와 경석을 사용한 경우 똑같이 17%로 나타나, 강자갈을 사용한 경우의 14%보다 약간 증가하는 경향을 보였다. 4. 압축강도는 모두 $228kgf/cm^2$ 이상으로 비교적 큰 강도발현을 보였으며, 인장강도 및 휨강도도 $27kgf/cm^2$, $58kgf/cm^2$ 이상으로 크게 나타났고, 팽창점토 및 경석 사용에 의한 강도차이는 크게 나타나지 않았다. 5. 슈미트 햄머에 의한 반발도는 압축강도가 클수록 크게 나타났으며, 팽창점토 및 경석의 사용에 의한 반발도 차이는 크게 나타나지 않았다. 6. 정탄성계수는 조골재로 팽창점토를 사용한 경우는 $1.12{\times}10^5kgf/cm^2$, 경석을 사용한 경우는 $1.09{\times}10^5kgf/cm^2$으로 사용골재에 의한 차이는 크게 나타나지 않았다. 7. 응력-변형율곡선은 응력의 증가와 함께 변형율이 증가하여 최대응력에서 파괴된 후 감소하는 경향을 보였으며, 최대응력에서의 변형율은 $2.0{\times}10^{-3}$정도로 거의 유사하게 나타났다.