근래 우리나라 에서는 압화에 대한 관심이 증폭되고 있으며 그 예술성에 대한 지속적인 연구가 이뤄지고 있다. 실내디자인 압화는 압화의 예술적인 활동으로부터 실생활 용품으로 발전된 것이다. 실내 디자인이란 인간이 거주하는 실내공간을 목적에 맞게 기능적 조건과 정서적 조건을 모두 만족 시켜야 하는 종합디자인 활동이라 할 수 있다. 본 연구에서는 압화의 예술성을 실내 디자인에 적용 시키기 위해 기존 압화기법에 광매체와 빛 투과성이 우수한 양파 압화를 이용하여 감성적이고 세련된 광매체압화 조형물 제작 기법을 연구하고 이를 이용하여 실제 조형물을 제작 하였다. 여기에 사용된 무기전계 발광시크는 두께가 약 0.2mm의 얇은 발광판으로 저전력에서 고휘도의 빛을 발생시키면서도 열이 발성하지 않는 첨단 광매체로 압화와 무기전계발광시트의 접목으로 기존의 압화의 한계를 넘어서는 새로운 형태와 내러티브를 도입하는 것이 가능해 졌고, 이를 통해 절전형 조명 조형물을 만들 수 있게 되었다.
Recently, remote phosphor is reported for white LED enhancing of phosphor efficiency compared with conventional phosphor-based W-LED. In this study, Remote phosphor was produced by screen printing coating on glass substrate with phosphor contents rated paste and heat treatment. The paste consists of phosphor, lowest softening glass frit and organic binders. Remote phosphor can be well controlled by varying the phosphor content rated paste. After mounting remote phosphor on top of blue LED chip, CCT, CRI, and luminance efficiency were measured. The measurement results showed that CCT, CRI, and luminance efficiency were 6,645, 68, and 1,16l m/W in phosphor 80 wt.% remote phosphor sintered at $600^{\circ}C$.
This study is expected to provide some basic data on how to apply more economical and efficient eco-friendly factors to reduce the carbon emissions. It has been scrutinized and analyzed the environmental factors of passive eco-friendly elements along with active eco-friendly elements as more efficient factors for energy conservation based on the case of a newly constructed broadcasting building with the green building certification in Sangam-dong DMC area. The first analysis was the energy consumption trends in Korea and the necessity of energy saving. Secondly, it was examined the energy consumption in the current status of the broadcasting building. Thirdly, it was looked into the correlation between the eco-friendly design application factors applied to the broadcasting building and the energy consumption types. As a result of the analysis, the application of fan and feed pump inverter along with ventilation system of waste heat recovery ventilation system were more meaningful in accordance with the economic feasibility of broadcasting buildings rather than economical effect of passive elements such as rooftop garden, reinforcement of building insulation. Also, the application of lighting control had the economical feasibility. Therefore, when it is intended to change the green building certification energy related evaluation items of the similar broadcasting building types, it is necessary to change the direction of adding weight to the more economical active element items in the future.
본 논문은 최적의 모니터 효율성을 설계하기 위해 CCFL과 LED 모니터의 광효율을 비교 분석한다. LCD 디스플레이 광원으로 많이 사용이 되고 있는 냉음극관 램프(Cold Cathode Fluorescent Lamp, CCFL)은 초기 구동 시 1,200[V]이상의 고전압과 점등 후 400 ~ 800[V]의 일정한 정상전압을 공급한다. 또한 3 ~ 6[mA]의 전류를 안정화 시킬 수 있는 전원회로가 필요하다. 고전압을 인가를 하게 되면 인버터에 무리가 많이 가고 냉음극관 램프에 많은 열이 발생을 하여 BLU(Back Light Unit)에 상당한 손상을 주어 그을리는 현상 발생, 이로 인하여 화면 출력 시 화면이 정상적인 색상을 출력을 못하고 노란색 출력, 화면 어두워짐을 확인할 수 있었다. 이러한 증상을 미연에 방지를 하고자 LCD디스플레이의 광원을 냉음극관 램프(Cold Cathode Fluorescent Lamp, CCFL)를 대신하여 발광다이오드(Light Emitting Diode, LED)을 이용하면 효율을 증대할 수 있다. 결론적으로 CCFL 방식보다 LED방식의 효율이 좋다는 것을 증명한다.
The present study was conducted to estimate the NE values of corn, dried distillers grains with solubles (DDGS) and wheat bran (WB) for laying hens based on an indirect calorimetry method and nitrogen balance measurements. A total of 576 twenty-eight-wk-old Dwarf Pink-shell laying hens were randomly assigned to four groups fed a basal diet (BD) or a combination of BD with 50% corn or 20% DDGS or 20% WB, with four replicates each. After a 7-d adaptation period, each replicate with 36 hens were kept in one of the two respiration chambers to measure the heat production (HP) for 6 days during the feeding period and subsequent 3-d fasting. The equilibrium fasting HP (FHP) provided an estimate of NE requirements for maintenance (NEm). The NE values of test feedstuffs was estimated using the difference method. Results showed that the heat increment that contributed 35.34 to 37.85% of ME intake was not influenced by experimental diets (p>0.05) when expressed as Mcal/kg of DM feed intake. Lighting increased the HP in hens in an fed-state. The FHP decreased over time (p<0.05) with the lowest value determined on the third day of starvation. No significant difference between treatments was found on FHP of d 3 (p>0.05). The estimated AME, AMEn, and NE values were 3.46, 3.44 and 2.25 Mcal/kg DM for corn, 3.11, 2.79, and 1.80 Mcal/kg DM for DDGS, 2.14, 2.10, and 1.14 Mcal/kg DM for WB, respectively. The net availability of AME of corn tended to be numerically higher than DDGS and WB (p = 0.096). In conclusion, compared with corn, the energy values of DDGS and WB were overestimated when expressed on an AME basis.
본 연구에서는 옥내 조명 설비의 전원을 ON/OFF 하기 위해 사용되는 저압용 스위치의 구조 및 발열 메커니즘을 제시하고, 에너지원의 종류에 따라 스위치의 고정금구 및 가동 접점 등의 소손패턴을 제시함으로써 향후 예상되는 PL 분쟁의 판단 근거를 확보하는데 있다. 스위치에 인가된 일반 화염은 한국산업규격(KS)의 난연성 시험 방법을 적용하였다. 또한 스위치에 공급된 전류는 대전류공급장치(PCITS)를 이용하였다. 실험이 진행될 때 주위의 온도는 $22{\pm}2^{\circ}C$, 습도는 40~60%를 유지시켰다. 스위치의 발열은 배선과 클립의 접속 불량, 가동 접점의 절연 열화 및 접촉 불량 등에 의해서 생성되는 것으로 판단된다. 일반 화염에 의해 소손된 스위치는 표면이 균일하게 탄화되었으며, 화원을 제거하면 자연 소화되었다. 일반화염에 의해 탄화된 스위치를 분해한 결과 고정금구 및 가동 접점 등은 비교적 양호한 형태를 보였으나 외함, 클립 지지대, 가동 접점, 표시램프 등에서 탄화 및 변색을 확인할 수 있었다. 과전류에 의해 소손된 스위치는 배선을 연결하는 클립 및 클립 지지대 등은 소손의 흔적이 거의 없으나 고정금구, 가동 접점, 표시 램프 등은 심하게 탄화되었다. 즉 접촉 저항이 큰 부분에서 집중적으로 소손되었고 내부에서 외부로 탄화가 진행되는 패턴을 나타냈다. 따라서 소손된 스위치의 탄화 패턴 및 금속 금구류의 특성을 분석하면 최초의 에너지원 판정이 가능하다.
기존의 $SrGa_2S_4:Eu^{2+}$ 녹색 발광 형광체는 주로 CRT (Cathode Ray Tube)용이나 FED (Field Emission Display), 그리고 EL (Electroluminescence)용 발광소자로 많이 연구되어졌다. 현재는 장파장 영역의 여기 특성을 이용한 LED (Light Emitting Diode)용 형광체로 주목 되어지고 있다. $SrGa_2S_4:Eu^{2+}$ 형광체의 일반적 합성 방법은 Flux를 이용하여 인체에 유해한 $H_2S$나 $CS_2$ 기체를 사용할 뿐만 아니라 높은 합성온도, 긴 반응시간 및 공정이 복잡한 단점을 지니고 있다. 따라서 본 실험은 황화물계 원료인 SrS, $Ga_2S_3$ 그리고 EuS를 출발 물질로 하여 $H_2S$ 기체를 사용하지 않고 혼합 기체$(5% H_2/95% N_2)$를 사용해 환원 분위기 하에서 $SrGa_2S_4:Eu^{2+}$을 합성하였다. 그리고 다양한 합성 조건과 LED용으로 사용되기 위해 수세처리와 Sieving 과정을 거친 형광체의 발광특성을 검토하였다.
Anaerobic digestion(AD) has successfully been used for many applications that have conclusively demonstrated its ability to recycle biogenic wastes. AD has been successfully applied in industrial waste water treatment, stabilsation of sewage sludge, landfill management and recycling of biowaste and agricultural wastes as manure, energy crops. During AD, i.e. organic materials are decomposed by anaerobic forming bacteria and fina1ly converted to excellent fertilizer and biogas which is primarily composed of methane(CH4) and carbon dioxide(CO2) with smaller amounts of hydrogen sulfide(H2S) and ammonia(NH3), trace gases such as hydrogen(H2), nitrogen(N2), carbon monoxide(CO), oxygen(O2) and contain dust particles and siloxanes. The production and utilisation of biogas has several environmental advantages such as i)a renewable energy source, ii)reduction the release of methane to the atomsphere, iii)use as a substitute for fossil fuels. In utilisation of biogas, most of biogas produced from small scale plant e.g. farm-scale AD plant are used to provide as energy source for cooking and lighting, in most of the industrialised countries for energy recovery, environmental and safety reasons are used in combined heat and power(CHP) engines or as a supplement to natural. In particular, biogas to use as vehicle fuel or for grid injection there different biogas treatment steps are necessary, it is important to have a high energy content in biogas with biogas purification and upgrading. The energy content of biogas is in direct proportion to the methane content and by removing trace gases and carbon dioxide in the purification and upgrading process the energy content of biogas in increased. The process of purification and upgrading biogas generates new possibilities for its use since it can then replace natural gas, which is used extensively in many countries, However, those technologies add to the costs of biogas production. It is important to have an optimized purification and upgrading process in terms of low energy consumption and high efficiency giving high methane content in the upgraded gas. A number of technologies for purification and upgrading of biogas have been developed to use as a vehicle fuel or grid injection during the passed twenty years, and several technologies exist today and they are continually being improved. The biomethane which is produced from the purification and the upgrading process of biogas has gained increased attention due to rising oil and natural gas prices and increasing targets for renewable fuel quotes in many countries. New plants are continually being built and the number of biomethane plants was around 100 in 2009.
The fishing lamp is a fishing gear that gathers fish at night. But the cost of oil, which is used to light fishing lamp, has been risen significantly up to 30-40% of total fishing costs. Therefore it is very urgent to develop an energy economical fishing lamp in order to solve the business difficulties of fisheries. Under this background, this research aims at developing a fishing lamp for squid jigging and hairtail angling fishery using the LED, which has excellent energy efficiency and durability. The LED fishing lamp developed can be controlled to fix a fit direction of fish shoal deep because a fishing lamp can be adjustable up and down directions. One unit of fishing lamp has about an 80Watt capacity and the frame of fishing lamp is made of aluminium to emit generated heat of LED to outside. The LED lamp developed was highly durable, only 5.7% of emitting efficiency decreased for 18 months. The illuminance of a unit LED lamp was 2,070lux at 1m and 21lux at 10 m distance, and the intensity of LED lamp system emitted 2,580lux and 400lux at the respective distances. After development of this fishing lamp, 100 units are installed on operating fishing vessels. Experimental results show that energy consumption of squid jigging and hairtail angling was reduced by 40% and 87%, respectively. In conclusion, our methods showed elevated fishing power, compared with traditional fishing method: 37.7% for squid jigging and 24.5% for hairtail angling.
구조용 폼의 용도는 난연, 단열 기능이외에 구조적인 목적으로 공극부위를 충진시키는 용도로 사용되고 있다. 경량 소재 개발을 위해 CFRP와 구조용 폼이 이용되고 있으며, PUR, PIR, PVC, PET와 같은 대표적인 폼이 존재한다. 본 연구에서는 구조용 폼의 특성 중 강도 강화를 위한 목적으로 에폭시 폼을 개발하고자 하였다. 에폭시 조성 중 산무수물계 경화제는 기존의 폴리올과 반응을 하기 때문에 산무수물계 에폭시 수지에 발포제를 이용할 경우 폼이 형성되는지, 형성된다면, 압축특성과 포밍 형태를 관하는 연구를 진행하였다. 에폭시 폼을 형성시키기 위한 발포제의 종류에 따른 영향 및 발포재의 농도에 따라 변화되는 폼밍의 결과 차이를 분석하였으며, 산무수물계 수지의 조성차이에 따른 폼의 압축강도를 평가하였다. 궁극적으로 에폭시 폼을 최적의 발포제 선정으로 구조적 강도가 높은 폼을 형성시킬 수 있음을 확인하였으며, 기존의 구조용 폼 소재에 비해 높은 압축강도 및 비압축 강도를 가짐을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.