• 전력전자학회논문지
• /
• 제16권4호
• /
• pp.358-365
• /
• 2011

LED는 친환경적 특성, 긴 수명, 우수한 효율 등의 장점이 있어 최근 기존의 백열전등 및 형광등을 대체하는 조명 수단으로 각광받고 있다. 또한, LED는 전기를 빛으로 변환하는 속도가 굉장히 빠른 반도체로 정보의 변조 및 인코딩이 용이하기 때문에 통신 소자로서 활용이 가능하다. 이를 이용하여 기존의 조명 기능을 수행함과 동시에 부가적으로 근거리 무선 통신을 수행하는 것을 가시광 통신 시스템이라 한다. 기존의 전압원 구동 가시광 통신 시스템의 경우, 스위치의 선형 영역 구동으로 인해 전력 변환 효율의 저하 및 발열이 심각하였다. 본 논문에서는 스위치를 스위칭 영역에서 구동시킴으로써 전력 변환 효율과 발열의 획기적인 개선이 가능한 고효율 스위칭 방식의 LED 드라이버를 제안한다. 또한 3MHz 무선 오디오 통신 시스템에 제안된 20W급 LED 드라이버를 적용하여 그 타당성을 검증한다.

• 조명전기설비학회논문지
• /
• 제23권12호
• /
• pp.176-183
• /
• 2009

대형병원의 에너지 소비패턴을 분석한 후 마이크로가스터빈을 적용할 경우 기존 시스템 대비 냉난방에너지 절감량 및 전기에너지 절감량과 경제성분석을 통해 대형병원의 에너지 소비량을 절감하기 위한 에너지성능평가 모의연구를 수행하였다. 0.5[MW]급 마이크로 가스터빈을 설치한 후 에너지 성능분석을 한 결과 터빈에서의 발전효율은 30[%]이며, 전기는 건물에서 사용되는 조명에너지 뿐만 아니라 전체 전기에너지의 40[%]을 절감할 수 있는 것으로 분석되었다. 또한 터빈에서 발전되는 전기량과 배열을 냉난방에너지원으로 이용할 경우 전체 시스템효율은 70[%]로 상승할 뿐만 아니라 난방에너지의 56[%], 냉방에너지의 67[%]를 절감할 수 있는 것으로 분석되었으며 현가등가법에 의한 시스템 투자회수 기간이 약 9년으로 분석되었다.

• 한국응용과학기술학회지
• /
• 제31권1호
• /
• pp.31-43
• /
• 2014

This experiment evaluated the interaction effect of extreme heat diet(EHD), inverse lighting, and cool water on the growth performance of broiler chickens under extreme heat stress. There were 4 experimental groups (T1: EHD 1, 10:00-19:00 dark, 19:00-10:00 light, cold water $9^{\circ}C$; T2: EHD 2, 10:00-19:00 dark, 19:00-10:00 light, cold water $9^{\circ}C$; T3: EHD 1, 09:00-18:00 dark, 18:00-09:00 light, cold water $14^{\circ}C$; T4: EHD 2, 09:00-18:00 dark, 18:00-09:00 light, cold water $14^{\circ}C$), each group composed of 25 broilers and the experiment was repeated 3 times. EHD 1 contained soybean oil, molasses, methionine and lysine. EHD 2 contained all nutrients of EHD 1 and vitamin C additionally. As a result, T1 and T2 displayed higher body weight increase and diet intake compared to T3 and T4 (p<0.05). The weights of their liver and gizzard were similar but the weights of the thymus and bursa F were higher for T1 and T2 compared to that of T3 and T4 (p<0.05). It was observed that T1 and T2 displayed higher concentrations of blood triglyceride, total cholesterol, HDL-C and blood sugar compared to that of T3 and T4 but LDL-C level was higher for T3 and T4 compared to that of T1 and T2 (p<0.05). T1 and T2 displayed higher levels of immunity substances such as IgG, IgA and IgM compared to T3 and T4 but the blood level of corticosterone displayed to be lower for T1 and T2 compared to T3 and T4 (p<0.05). The T1 and T2 contained a higher amount of fecal lactobacillus compared to that of T3 and T4 but the T3 and T4 contained a higher amount of fecal E. coli, total aerobic bacteria, coliform bacteria compared to that of T1 and T2 (p<0.05). T1 and T2 displayed higher concentrations of cecal acetic acid, propionic acid and total short chain fatty acids compared to T3 and T4 but T3 and T4 displayed higher concentrations of butyric acid, isobutyric acid, valeric acid and isovaleric acid compared to T1 and T2 (p<0.05). These results have been observed that broiler chickens exposed to extreme heat stress with feeding EHD, inverse lighting and cold water would improve blood lipid, and elevate the production of immunity substance, beneficial microorganisms, and short chain fatty acids. This provision would also reduce the blood sugar consumption rate as energy sources and these effects will improve the growth performance of the broilers exposed to extreme heat.

• 한국세라믹학회지
• /
• 제50권1호
• /
• pp.75-81
• /
• 2013

We fabricated translucent opal glass to replace the polycarbonate diffuser in LED lighting systems in order to solve the durability problem. Batch materials of opal glass with a composition of calcium phosphate were created and melted at $1550^{\circ}C$, and the effect of opaqueness was identified by an addition of 1~7% calcium phosphate as an opacifier raw material. As a result, translucent opal glass was obtained by the melting of the mixed batch materials with a composition of more than 5% calcium phosphate glass at $1550^{\circ}C$ for 2 hrs, which had excellent optical properties for the diffuser of a LED lighting system with no dazzling from direct light by a high haze value exceeding 90% and a low parallel transmittance value of about 5%. For the thermal properties, the thermal expansion coefficient was found to be $5.6{\sim}5.9{\times}10^{-6}/^{\circ}C$ and the softening point was $874{\sim}884^{\circ}C$. In addition, good thermal properties such as good thermal shock resistance and feasibility for use with a general manufacturing process during the forming of glass tubes and bulbs were noted. Therefore, it is concluded that this translucent opal glass can be used as a glass diffuser material for LED lighting due to its high heat resistance and high durability as a replacement for a polycarbonate diffuser.

• 한국결정성장학회지
• /
• 제24권3호
• /
• pp.120-126
• /
• 2014

LED 조명등의 내구성 문제를 개선할 목적으로 폴리카보네이트 광확산판 소재를 대체하기 위한 반투명 녹색 컬러유백유리를 제조하였다. 녹색 컬러유백유리의 원료로는 유백제로서 인산칼슘을, 착색제로서 산화철을 사용하였고, $1550^{\circ}C$에서 용융하였다. 그 결과로서 LED 조명등의 광확산판으로서 90 % 이상의 높은 헤이즈 값과 1 %의 낮은 평행광 투과율을 가짐에 따라 직사광에 의한 눈부심이 없어 일반 컬러유리에 비해 매우 우수한 광학특성을 나타내는 반투명의 녹색 컬러유백유리가 얻어졌다. 따라서 녹색 컬러유백유리가 높은 열저항성과 내구성을 가지고 폴리카보네이트 광확산판을 대체하기 위한 LED 조명등의 광확산판 소재로 사용될 수 있을 것으로 판단되었다.

• 한국전자파학회논문지
• /
• 제21권8호
• /
• pp.905-910
• /
• 2010

본 논문에서는 조명용 LED(Light Emitting Diode)의 스위칭 구동 회로를 이용한 변조 기법으로 조명 기능과 무선 통신 기능을 동시에 수행하는 가시광 통신(VLC: Visible Light Communication) 시스템을 제안하였다. 본 방식은 기존의 선형 영역에서 동작하는 LED 구동 회로를 갖는 가시광 통신 시스템에 비해 고효율이므로 고출력의 조명용 LED 시스템에 적용할 수 있는 장점이 있다. 제안된 시스템의 유용성을 입증하기 위하여 디지틀 방식의 오디오 시스템을 채용하여 가시광 통신 시스템을 구현하고, 그 실험 결과를 제시함으로써 제안된 방식의 우수성을 검증하였다. 실험 결과, 제안 회로의 시작품은 특별한 광필터 없이 20 W급 조명을 사용해서 약 1.5 m의 반경에서 최대 10 Mbps의 데이터 전송률을 달성하였다.

• Architectural research
• /
• 제22권1호
• /
• pp.13-21
• /
• 2020

The purpose of this study was to evaluate the variation in building energy predictions caused by simulation settings related to building envelop thickness. The study assessed the ceiling depth impact on skylight energy performance through OpenStudio integrated Radiance and EnergyPlus simulation programs. A ceiling as deep as 1.5 to 3m was analyzed for skylight to roof ratios from 1% to 25%. The results indicated that the building ceiling depth negatively affected the capability of skylights to significantly reduce building energy consumption. Through a parametric analysis, the study concluded that 8%, 9%, 10% and 11% skylight to roof ratio were optimal in terms of total building energy consumption for a ceiling depth of 1.5m, 2m, 2.5m and 3m, respectively. In addition, the results showed that the usually recommended 5% skylight to roof ratio was only efficient when no ceiling depth was included in the simulation model. Furthermore, the study indicated that the building energy saved by the optimal skylight of each ceiling depth decreased as the ceiling depth deepened. The highest total building energy reduction was 9%, 7%, 5% and 3% for a ceiling depth of 1.5m, 2m, 2.5m and 3m, respectively. This study induced that the solar heat gains and daylight visible transmittance by ceiling depth were crucial in the predictions of skylight energy performance and should not be neglected through building simulation simplifications as it is commonly done in most simulation programs' settings.

• 설비공학논문집
• /
• 제17권1호
• /
• pp.82-87
• /
• 2005

The purpose of this study is to suggest the characteristics and actual state of energy consumption by the analysis of energy consumption data in an office building. This study examines and analyzes daily and monthly energy consumption of an office building located in Seoul, Korea regarding type of load and business classification within a building. The results are as follows. 1) Energy consumption of office building for each type of load show similar consumption patterns, regardless of seasons such as cooling period and heating period. 2) Out of all annual energy consumption, consumption for lighting took about $43\;\%,$ general electric Power about $23\;\%,$ emergency power $25\;\%,$ computer center $5\;\%$ and cooling power $4\;\%,$ showing that the consumption for lighting was highest, and the percentage of energy consumption for cooling power for operation of cooling facilities took the lowest percentage. 3) Annual gas consumption used for heating and hot water supply were $38,\;36\;\%$ for officetel and office respectively, and $26\;\%$ for arcade. 4) Electricity consumptions used for cooling power for each use of building, office and officetel recorded in July and August of cooling seasons. Even though it shows different patterns for each month, energy consumption showed unique pattern throughout the cooling seasons.

• KIEAE Journal
• /
• 제17권3호
• /
• pp.45-50
• /
• 2017

Purpose: There have been more researches focused on eco-friendly construction practices in order to save energy consumed and these practices have been extensively applied for constructing buildings. However, researches on energy consumption saving and efficiency for hospital facilities have been still insufficient. This research aims to draw factors that affect energy efficiency of hospital buildings through literature reviews and perform an expert-survey using AHP(Analytical Hierarchy Process) method in order to analyze the importances and priorities of these energy efficient factors. Method: Using the AHP method, this paper suggests the importances and priorities of factors to affect energy efficiency in hospital buildings. The survey of experts at a architectural design and a construction management companies was conducted via e-mail and mail. Result: As a result, factors of window and door, insulation, ventilation, and natural lighting turned out relatively important as respectively 0.104, 0.102, 0.101, and 0.095 n the energy efficiency in hospital buildings, while factors of artificial lighting, geothermal, solar heat, and control did unimportant as 0.027, 0.033, 0.043, and 0.053.

• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.57-63
• /
• 2015

Recently, LED is widely used in the kinds of display devices or lighting. In this paper, we fabricated LED chamber light for naval vessels to replace to conventional chamber light using incandescent lamp. The LED package of chamber light was designed with luminous intensity of 5.5 cd, color temperature of $6,000{\pm}500K$, forward voltage of 3~3.2 V and input current of 60 mA. A LED module was composed of 36 LED packages and metal PCB. The VF and luminous intensity of LED package were getting down when temperature increased. The temperature of LED chamber light was measured by changing the number of LED package and applied current for one hour when an electric current flow. The heat transfer capability have been improved by using metal PCB. The power consumption of LED chamber light reduced by 86% compared to the conventional chamber light using incandescent lamp.