• 조명전기설비학회논문지
• /
• 제27권1호
• /
• pp.10-16
• /
• 2013

This study performed a subjective evaluation of the Semantic Differential (SD) method for living room activities to evaluate the living room lighting environment and investigated the relationship between these through luminance distribution in the space. As a result, three factors-"lightness", "emotion" and "calmness"-have been grouped together. According to the analysis of experimental variables, difference has been observed depending on color temperature, the dimming of the ceiling & cove lights and the use of down lights and a bracket. 'Conversation with Family', 'Having Fun with Family', 'Entertaining Guests' and 'Reading a Book or Newspaper' requires "lightness". In terms of "emotion"-centered activities, 'Watching TV' is the highest, but all three factors are related. In terms of "calmness"-centered activities, 'Relaxing' is the highest.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.21-24
• /
• 2004

In this paper, we measured the optical characteristics of the electrodeless fluorescent lamp system as product of the inside and outside of the country and compared the measured data. Power consumption wave of domestic 150 W is unstable than it's of Endura 150 W. Optical characteristics(luminance, luminous flux, color rendering index, efficiency, CIE chromaticity coordinate) value of the former is a little small than the latter. In conclusion, if we improve a little more quality then we must secure the superiority in competition.

• 한국전기전자재료학회논문지
• /
• 제26권6호
• /
• pp.493-501
• /
• 2013

LED lighting is sensitive because it made by semiconductor. So it has been researched about radiation of heat technologies for a long time. In addition, measurement and assessment a radiation of heat also conducted. It is necessary to get a date of accuracy temperature on the board after LED driven for measuring Junction temperature of the LED Lighting. For this research, we use 5 chip which is 4 W power on top of LED lighting board made by aluminum. Thermal camera effects to emissivity depending on material and property of the surface in LED board because it determines thermal energy which emitted from material surface. it is not only thermal camera has not a standard about emissivity. It has an error of temperature when emissivity was measured by thermal camera. we confirmed that emissivity and reflected temperature depending on color and quality of the surface throughout experiment.

• 만화애니메이션 연구
• /
• 통권11호
• /
• pp.137-151
• /
• 2007

본 연구에서는 크리스마스의 악몽을 중심으로 팀 버튼이 조명을 어떻게 사용하였는지를 분석하여 그의 독특한 컬러 비주얼 스토리텔링 스타일은 어떤 것인지 연구해 보았다. 분석결과 팀 버튼은 $1930{\sim}60$년대 B급 헐리우드 영화와 고전주의적 조명을 사용하였다. 그는 크리스마스의 악몽에서 조명을 이용하여 칼라를 강한 비주얼 스트럭쳐로서 사용하였고 이것은 작품의 일관된 몽환적 분위기를 유지하는데 상당한 기여를 하였음을 알 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1137-1138
• /
• 2008

The purpose of this study is to implement a landscape lighting system that displays full color video by precisely controlling the R, G, B (Red, Green, Blue) LEDs which have a resolution of 256 each. The system implemented in this study consists of a PC, MASTER, SLAVEs and MODULEs. The PC sets the various landscape lighting displays, and the image files can be sent to the MASTER through a virtual serial port connected to the USB (Universal Serial Bus). The MASTER sends a sync signal to the SLAVE. The SLAVE uses the signal received from the MASTER and the landscape lighting display pattern.

• 조명전기설비학회논문지
• /
• 제26권12호
• /
• pp.1-8
• /
• 2012

The performance and lighting characteristics of the LED depend on cooling condition because the power LED generates lots of heat. In this paper, the effect of the generated heat from power LED module on lighting characteristics and performance is measured and evaluated. For experiments, the transient temperature of a power LED module with cooling condition is measured. In addition, the temperature and lighting characteristics of the LED module are measured during the steady state. As a result, the cooling condition is less effective on the lighting characteristics of the LED module at rated current but the cooling condition extremely affects those of the LED module over the rated current. Because high temperature of the power LED module causes the low phosphor conversion, luminance efficiency becomes low and color temperature becomes high. When power LED module are driven over the rated condition, higher temperature is directly related to lighting characteristics and performance of the LED module rather than higher current.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.186-193
• /
• 2020

We investigate a fog-detection CCT control system using low deck lighting as a solution to the forward visibility of pole-type street lamps employed on existing roads. The lighting standards were met with a light source that has less compared with those of pole-type street lamps. The results show that the transmission rate was increased by changing the color temperature by automatically recognizing fog in bad weather and minimizing the phenomenon of lighting. In addition, it was allowed to create a safer and more comfortable driving environment for drivers owing to flicker or light pollution of existing pole-type street lamps. As a result, if lighting is used at a lower level than pole-type street lamps, the accident rate caused by securing the driver's forward visibility can be reduced sharply and existing problems can be resolved.

• 조명전기설비학회논문지
• /
• 제29권10호
• /
• pp.25-33
• /
• 2015

LED lightings combined with IT technology can provide variable illumination environments that can be controlled by users according to their emotional need and preferences. This is one of the most beneficial functions compared with conventional lightings offering only fixed color and brightness. There is however lack of analysis data for creating practical lighting solutions satisfying user preferences in a wide range of applications from residential to commercial places. To materialize the technical advantages of user-controllable LED lightings, more observation data are required in various situations. Therefore, dissimilar emotional needs are determined in the present study for compartmental office spaces (staff lounge room, meeting room and desk job place) through subjective experiments by 45 observers. The optimum lighting conditions (CCT and illuminance) are finally obtained using Response Surface Method and relevant prediction functions are also deduced. The final outcome can be applied for making user-preferred office illumination products.

• 한국기계기술학회지
• /
• 제13권1호
• /
• pp.31-40
• /
• 2011

This study was conducted to research how UCD(Ultra Constant Discharge) lamp lighting affects plant cultivation. To get the results within a short time, lettuce seedling was selected as a plant and nutrient hydroponic beds were used in a dark room for 100% artificial lighting. Two beds were installed for same distance lighting condition with UCD lamp and Hi-pressure Sodium lamp each and another two beds were installed for same light intensity condition with each type of lamp. After 15 days of cultivation, for both conditions, the yields under UCD lamp were weighed more than that under Hi-pressure Sodium lamp. The result can be analyzed that the spectrum of UCD lamp having near sunlight characteristic is much superior to that of Hi-pressure Sodium lamp having a line spectrum characteristic on yellow and red wavelengths for plant cultivation.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.846-847
• /
• 2016

LED 조명은 IT융합 시대로의 진화에 따라 단순조명에서 인간중심화/다기능화 시스템 조명으로 발전하였고 그로 인해 다양한 센서기능, 통신기능 등의 IT기술과 소프트웨어를 융합시켜 사용 환경변화에 따른 조명 제어로 에너지를 절감하고, 빛의 세기와 색조절로 사용자 중심의 맞춤형 조명이 요구 되고 있다. 이러한 지능화된 시스템 조명을 위해서는 사용자 중심의 센서 적용 및 제어가 가능해야하며 이를 위한 통신 모듈의 플랫폼화가 필요하다. 이에 본 논문에서는 LED 조명관제를 위해 블루투스 BLE를 활용한 통신모듈 플랫폼을 제안하였다.