• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.851-860
• /
• 2015

Transport Social Overhead Capital refers to public utilities necessary for a nation's basic economic activities, and is divided into roads, railway, subway, ports and so on. It is important to be able to provide these SOC in the right place at the right time to enhance productivity and competitiveness of a nation. In this study, correlation and factor analysis on countries' socioeconomic and transport indicators were performed in order to understand the need for expansion of SOCs including railway, and to identify the impact they have on national competitiveness(productivity). As a result, GDP showed high correlativity(0.59~0.99) with factors such as population, land area, extension of available railroad, and road extension. Specifically, through the analysis of Russia's urban transport system and comparison between socioeconomic indices and SOCs of OECD countries, it was examined that how increasing transport infrastructure investments could enhance national competitiveness. In conclusion, opening new Light Rail greatly affects the growth of GDP followed by the increasing extension of available railroad. Furthermore, if available railroad extension is increased by 10 % from 2014, assuming high speed tram is opened, GDP will likely increase by 21.6%.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.466-471
• /
• 2011

Optical coherence tomography(OCT) is an emerging medical diagnostic tool that draws great attention in medical and biological fields. It has a 10-100 times higher spatial resolution than that of the clinical ultrasound but lower imaging depth such as 1-2 mm. In order to image internal organs, OCT needs an endoscopic probe. In this paper, the principle of Fourier-domain optical coherence tomography with high-speed imaging capability was introduced. An OCT endoscope based on MEMS technology was developed. It was attached to the Fourier-domain OCT system to acquire three-dimensional tomographic images of gastrointestinal tract of New Zealand white rabbit. The endoscope had a two-axis scanning mirror that was driven by electrostatic force. The mirror stirred an incident light to sweep two-dimensional plane by scanning. The outer diameter of the endoscope was 6 mm and the mirror diameter was 1.2 mm. A three-dimensional image rendered by 200 two-dimensional tomographs with $200{\times}500$ pixels was displayed within 3.5 seconds. The spatial resolution of the OCT system was 8 ${\mu}m$ in air.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.149-156
• /
• 2013

Purpose: The aim of this study was to determine a suitable type and size of Hangul fonts for printed materials in the presbyopic age. Methods: Based on the most common Hangul fonts used today, three types of fonts were used Hamchrombatang, Sinmoonmyungjo and Sinmyungjo at small font sizes in the range 9-11 point (pt). Subjects were 101 volunteers aged 41 through 85 years. Near visual acuity (VA) was corrected to read VA 0.5 at 40 cm after distance correction. The subjects were asked to read words containing 88 characters in 10 pt after a question about preference. Readability was assessed by reading rate that was calculated as the number of words read correctly in one minute (words per minute, wpm). Results: The most preferred font type was Simmyungjo at small font sizes. Although preferred font sizes were different in each font type, Sinmyungjo was generally preferred at 10 pt more than other fonts. Hamchrombatang and Sinmyungjo were read significantly faster than Sinmoonmyungjo. There was a weak negative relationship between readability and age in Sinmyungjo. In comparing between the top 10% and the bottom 10% group sorted by reading rate, the top group showed lower average age and addition than the bottom group, however there were no significant differences in reading rate among the fonts. Conclusions: Although increasing age tends to be low in readability for Sinmyungjo, in the light of preferred font and readability, it is recommended to use a 10 pt Sinmyungjo font in printed materials for the presbyopic age.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.666-671
• /
• 2018

A honeycomb panel is a plate made by attaching two surface plateson eitherside of a honeycomb core. The honeycomb plate hasexcellent specific strength and energy absorption and is suitable for use in regions where good impact resistance is required. Recently, with the increasing the need for a lightweight design to facilitate transportation, numerous studies have been conducted using aluminum honeycomb plates as body materials for vehicles such as automobiles and high-speed trains. In addition, honeycomb plates have excellent sound deadening properties, as well as excellent heat insulation and durability. Savings in weight using lightweight materials such as aluminum alloy for honeycomb panel's skin can lead to increase fuel economy and reduction in air pollution. In this study, in order to improve the design technology of the honeycomb plate material, the manufacturing technology of the aluminum honeycomb core and honeycomb plate material and various mechanical properties of the honeycomb plate were evaluated. From the results, it was found that the design of the manufacturing process of the aluminum honeycomb plate, as well as itsproduction and characteristics, were improved. The resulting excellent energy absorption capability of the honeycomb plate was due to the repetitive core buckling, indicating that the higher the compressive strength, the higher the strength per bonded area.

• Journal of KIISE:Software and Applications
• /
• v.37 no.2
• /
• pp.104-109
• /
• 2010

The lighting reflection is a common problem in image analysis and causes the many difficulties to extract distinct features in related fields. Furthermore, the problem grows in the rainy night. In this paper, we aim to remove light reflection effects and reconstruct a road surface without lighting reflections in order to extract distinct features. The proposed method utilizes a 3D analysis based on a multiple geometry using captured images, with which we can combine each reflected areas; that is, we can remove lighting reflection effects and reconstruct the surface. At first, the regions of lighting sources and reflected surfaces are extracted by local maxima based on vertically projected intensity-histograms. After that, a fundamental matrix and homography matrix among multiple images are calculated by corresponding points in each image. Finally, we combine each surface by selecting minimum value among multiple images and replace it on a target image. The proposed method can reduces lighting reflection effects and the property on the surface is not lost. While the experimental results with collected data shows plausible performance comparing to the speed, reflection-overlapping areas which can not be reconstructed remain in the result. In order to solve this problem, a new reflection model needs to be constructed.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.4 s.48
• /
• pp.543-548
• /
• 2004

For pearl pigments used for splendor or gloss effect of make-up products, especiallv point make-up products like eye-shadow and blusher, we studied the variation of particle size distribution by the grinding time and by the binder used as a binding agent. In this study. high speed mixer was used and the particle sire distribution was measured by using the light scattering method. In case of pearl pigments, its median diameter of $5{\;}{\mu}m$, the particle size was reduced to 4.6 um when it was ground for 120 s. When it was applied for the pearl pigment of $45{\;}{\mu}m$, the particle size was reduced to $27{\;}{\mu}m$. We confirmed that the latter was reduced more largely and the original gloss was reduced too. For the binder, we studied the correlation between particle size of raw material and grinding time. We also investigated the effects of the binder contents on the variation of particle size distribution of products by aggregation of particles.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.137-148
• /
• 2006

The purpose of this study was to compare muscle activity in the lower extremity during walking wearing jogging and roller shoes. Twelve male middle school students (age: 15.0 yrs, height 173.7 cm, weight 587.7 N) who have no known musculoskeletal disorders were recruited as the subjects. Seven pairs of surface electrodes (QEMG8, Laxtha Korea, gain = 1,000, input impedance >$1012{\Omega}$, CMMR >100 dB) were attached to the right-hand side of the body to monitor the rectus femoris (RF), vastus medialis (VM), vastus lateralis (VL), biceps femoris (BF), tibialis anterior (TA), and medial (GM) and lateral gastrocnemius (GL) while subjects walked wearing roller and jogging shoes in random order at a speed of 1.1 m/s. An event sync unit with a bright LED light was used to synchronize the video and EMG recordings. EMG data were filtered using a 10 Hz to 350 Hz Butterworth band-passdigital filter and further normalized to the respective maximum voluntary isometric contraction EMG levels. For each trial being analyzed, five critical instants and four phases were identified from the recording. Averaged IEMG and peak IEMG were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions (p<.05). The VM, TA, BF, and GM activities during the initial double limb stance and the initial single limb stance reduced significantly when going from jogging shoe to roller shoe condition. The decrease in EMG levels in those muscles indicated that the subjects locked the ankle and knee joints in an awkward fashion to compensate for the imbalance. Muscle activity in the GM for the roller shoe condition was significantly greater than the corresponding value for the jogging shoe condition during the terminal double limb stance and the terminal single limb stance. Because the subjects tried to keep their upper body weight in front of the hip to prevent falling backward, the GM activity for the roller shoe condition increased. It seems that there are differences in muscle activity between roller shoe and jogging shoe conditions. The differences in EMG pattern may be caused primarily by the altered position of ankle, knee, and center of mass throughout the walking cycle. Future studies should examine joint kinematics during walking with roller shoes.

• Journal of Korean Society of Transportation
• /
• v.30 no.3
• /
• pp.119-127
• /
• 2012

For traffic safety, it is imperative for motorists to secure their clear view and to maintain a similar speed with others while driving in a lane. Large-sized vehicles at lower speeds, however, are likely to increase the risk of accident when they share a lane with cars. Although to overcome this complication the Korean Road Traffic Act established rules for the safe use of roads, the reality is that the rules are seldom observed strictly. In this light, this study was designed to analyze the severity of truck-involved accidents, thereby providing justification for the need of truck-designated lanes and thus contributing to measuring road safety more precisely. A binomial logistic regression model was applied to analyze the severity of truck-involved accidents. The analysis showed that several variables affect the severity of truck-involved accidents on freeways; i.e., violation against the rule of truck-designated lanes, weather, difference between daytime and nighttime, and parking on road shoulder. Moreover, the strong enforcement will be needed to make motorists observe the rule, because a Wald statistical test showed that the violation against the rule of truck-designated lanes has the largest influence on the severity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.5
• /
• pp.255-264
• /
• 2013

Cobalt aluminate ($CoAl_2O_4$) is a highly stable pigment with excellent resistance to light, weather, etc., which has resulted in widespread use as a ceramic pigment. Due to the unique optical characteristics, $CoAl_2O_4$ is generally used as a coloring agent to decorate porcelain products, glass, paints and plastics. Here, $CoAl_2O_4$ pigments were synthesized by polymerized complex method and solid state reaction. Then $CoAl_2O_4$ pigment were grinded using the attrition milling with 1 mm size zirconia ball for 3 hours. The attrition milling process was performed at the constant speed of 800 rpm and ball to powder weight ratio (BPR) was 100 : 1. The characteristics of synthesized pigment were analyzed by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), particle size analyser (PSA) and CIE $L^*a^*b^*$. The XRD patterns of $CoAl_2O_4$ show single phase spinel structure. The particle size of $CoAl_2O_4$ measured by FE-SEM, TEM and PSA analysis was in the range of 100~200 nm. The blue color of obtained $CoAl_2O_4$ pigments could be confirmed through CIE $L^*a^*b^*$ measurement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.226-241
• /
• 2000

Recently a new generation of crown and bridge veneering resins containing submicron glass fillers was introduced. These ultrasmall particle hybrid composite materials distinguish themselves, compared with conventional microfill crown and bridge resins, through improved mechanical properties. It is claimed that these composites are suitable for metal free crowns and even bridges using fiber reinforcement. The purpose of this study was to evaluate the effect of thermal cycling on the tensile strength of the following veneering composites: Artglass(Heraeus Kulzer Co., Wehrheim, Germany), Estonia(Kuraray Co.. Japan), Sculpture(Jeneric Pentron Co., Wallingford, U.S.A.), and Targis(Ivoclar Co., Schaan Liechenstein). According to manufacturer's instructions, rectangular tensile test specimens measuring $1.5{\times}2.0{\times}4.5mm$ were made using a teflon mold. Whole specimens were divided into two groups. One group was dried in a desiccator at $25^{\circ}C$ for 10 days, and another group was subjected to thermal cycling($10,000{\times}$) in water($5/55^{\circ}C$). All test specimens were placed in a universal testing machine and loaded until fracture with a crosshead speed of 0.5mm/min. Weibull analysis and Tukey's test were used to analyze the data. The fracture surfaces of specimens were observed in SEM and the aliphatic C=C absorbance peak of Estenia and Targis resin was analyzed using Fourier transform infrared(FTIR) spectroscopy. Within the limitations imposed in this study, the following conclusions can be drawn: 1. Both in drying condition and thermal cycling condition, the highest tensile strength was observed in Estenia testing group(p<0.05). 2. The strength data were at to single-mode Weibull distribution, and the Weibull modulus of all veneering composite resin specimens increased after thermal cycling treatment. 3. After thermal cycling test, the highest tensile strength was observed in the Estenia group, and the lowest value was observed in the Targis group. The tensile strength values showed the significant differences between each group(p<0.05) 4. The aliphatic C=C absorbance peak of Estonia and Targis resin was decreased after light curing, and there was no distinct change after thermal cycling.