• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.1
• /
• pp.34-40
• /
• 2013

The 1st assessment(performance test) was applied to assure the floor impact sound performance for developing the dry double-floor with the change of rubber hardness of the upper panel's support and the ceiling structure of the sub-floor. Depends on the change of the rubber hardness in sub-structure, the heavy-weight sound impact value is improved up to 3 dB, and the light-weight sound impact value is moved up to 21 dB, comparing with the bare-slab. Also, the improved value for the floor impact sound conjugating with the sub-floor's ceiling was 5 dB. Based on this result, the 2nd assessment(performance test) was made the state that the rubber hardness of the sub-floor support was ranged between 50 and 70 for considering the stability of walking patients. In addition to this process, the assessment was carried out with a variety of ceiling structure applied to the dry double-floor structure with the air flow system on the sub-floor's ceiling. The result for the 2nd assessment proved that TYPEII-3 had the better sound reduction performance in the heavy-weight impact sound test than other types, and also for the light-weight impact sound TYPEII-3 had the 29 dB sound reduction performance overall. Henceforth, based on the result the research for the sound reduction performance from the floor impact sound shall be ongoing process as well as the development of a double-dry floor and a sound reduction ceiling to suitable on the field.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.4
• /
• pp.207-210
• /
• 2008

It is very important factors to control optimal light transmission ratio and soil moisture content in order to produce good quality of ginseng seedling. To study the effect of light transmission ratio (LTR) and soil moisture content(SMC) on growth characteristics and yield of ginseng seedling, LTR was controlled by three level such as 21.2, 24.8% and 30.3%, and SMC was plotted by four level of 11.0%, 12.5%, 15.3% and 18.9% at the greenhouse. Chlorophyll content was gradually decreased in the low LTR (21.2%), while it was distinctly decreased by the decrease of SMC in excessively high LTR (30.3%). The decrease of SMC in the high LTR increased heat injury ratio distinctly, while heat injury ratio in the low LTR was only increased when SMC was very low such as 11.0%. All of fresh root weight per Kan (3.3$m^2$), root weight per plant, and the number of usable seedling were distinctly decreased by the increase of LTR and the decrease of SMC. Excessive increase of LTR in optimal SMC (18.9%) hadn't a great effect on the decrease of root weight, while root weight in low SMC was distinctly decreased by the increase of LTR. Ratio of rusty root was distinctly increased in the condition that both of LTR and SMC were high. Ratio of rusty root in the excessively high LTR was gradually fallen off by decrease of SMC, but its ratio in low SMC didn't changed distinctly by the decrease of SMC.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.137-138
• /
• 2023

The floating floor is a structure which introduced to reduce the noise of apartment houses. This structure can decrease vibration energy through resilient materials. However, it is limited to completely construct resilient materials in South Korea due to floor heating structure and other reasons. And It is a controversial issue how well the resilient materials should be constructed to prevent floor impact noise. These resilient defect areas are typically found in wall corners, door sills, hot water dispenser in kitchen and areas where thermal insulation is attached. This study investigates the acoustical effect of the defect areas in two ways. First, it is analyzed by several assumption conditions and calculated how much deviation would occur. Then we researched the deviation of the 76 field test data about light-weight floor impact noise. This study could be useful for a constructor to determine how much should minimize resilient materials defect areas.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.4
• /
• pp.277-283
• /
• 2016

Background: The photosynthetic efficiency cool-season, semi-shade ginseng is normal at low morning temperatures, but drops at high afternoon temperatures. Therefore, optimal plant performance would be ensured if it were possible to control daily light transmission rates (LTR). Methods and Results: Plants were grown in a controlled light environment that replicated 11 AM conditions and comparatively analyzed against plant grown under normal conditions. Growth in the controlled light environment resulted in a 2.81 fold increase in photosynthetic efficiency with no change in chlorophyll content, although LTR were high due to low morning temperatures. Increased aerial plant growth was observed in the ginseng plants adapted to the controlled light environment, which in turn influenced root weight. An 81% increase in fresh root weight (33.3 g per plant on average) was observed in 4-year-old ginseng plants grown in controlled light environment compared to the plants grown following conventional practices (18.4 g per plant on average). With regard to the inorganic composition of leaves of 4-year-old ginseng plants grown in controlled light environment, an increased in Fe content was observed, while Mn and Zn content decreased, and total ginsenoside content of roots increased 2.37 fold. Conclusions: Growth of ginseng under a favorable light environment, such as the condition which exist naturally at 11 AM and are suitable for the plant's photosynthetic activity creates the possibility of large scale production, excellent-quality ginseng.

• Journal of Bio-Environment Control
• /
• v.30 no.3
• /
• pp.218-229
• /
• 2021

Recently, as consumers' interest and importance in health care have significantly increased, they prefer natural and organic foods that do not use chemical pesticides. Since sprout vegetables effectively promote health and prevent diseases such as cancer and cardiovascular disease, the consumption of sprout vegetables, a highly functional and safe food, has been increased significantly. This study aimed to investigate the effect of light on the growth and bioactive compounds of seven different sprout vegetables. After sowing the seeds of various sprout vegetables (kale, Chinese kale, broccoli, red cabbage, alfalfa, red radish, and radish), the sprouts were cultivated under light conditions (20℃, RGB 6:1:3, 130 μmol·m^-2·s^-1, 12 hours photoperiod) and dark condition for 7 days. Sprouts samples were taken at 1-day intervals from 4 to 7 days after treatment. The fresh weight, dry weight, plant height, total phenol content, and antioxidant capacity were measured. Brassica species (kale, Chinese kale, broccoli, red cabbage) and Medicago species (alfalfa) had significantly higher fresh weight values under dark conditions, while the content of bioactive compounds was increased considerably under light conditions. In contrast, the fresh weight of Raphanus genus (red radish, radish) significantly increased under the light condition, but the antioxidant phenolic compounds were significantly higher under the dark state. A negative correlation was observed between the growth and secondary metabolites in various sprout vegetables. This study confirmed the effect of light and dark conditions on different sprout vegetables' growth and nutritional value and emphasizes the importance of harvest time in producing high-quality sprout vegetables.

• Journal of Ginseng Research
• /
• v.6 no.2
• /
• pp.149-153
• /
• 1982

To investigate the effect of light intensity on the growth of shoots and roots, water and chlorophyll contents in the ginseng leaf were determined at 5%, l0%, 20%, 30% light transmittance rate (LTR) with 1,2 and 4 year-old ginseng plants in the field. Stem length, size of the leaf, water and chlorophyll contents were decreased as the increase of the light intensity in all ages of ginseng plants. The degree of decrease was severe in the one year-old ginseng compared to that of 2, or 4 year-old ginseng, while there was no difference between the 2 and 4 year-old plants. Root weight per plant was highest at 5% LTR in the one year-old plants, while it was at 20% LTR in the 2 and 4 year-old plants. Generally, demand of light for the growth of one year-old ginseng was lower than those of 2 or 4 year-old plants there was no difference of it among the ginseng plants older than 2 years.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.15 no.2
• /
• pp.2968-2979
• /
• 1973

The aim of this study was to bring light on the effect of permeability to yield weight of paddy rice on the compressed soil. a) The percolation volume during the growth of paddy rice reduced, while the degree of compression on soil column increased and varied by the evaporation and absorption volumn. b) The percolation volume in the natural soil column was notably low compared with that of in the artificial and had little influence to the variation of permeabilty by compression. c) The results in growth of paddy rice were best on the section of low compression and the yield weight reduced, while the degree of compression on the soil column increased. d) The relationship between the yield weight and percolation volumn, under the condition when percolation volume is 1mm/day, had little difference in the yield weight but immediately reduced under $0.5{\sim}1.0mm/day$. The consequences of investigation are not so perfect, but have done my best to get some new data for effect on additional yield by inquiring into influences of permeability to the yield weight of paddy rice on compressed paddy field. I will have a great pleasure if treatise helps investigaters or the men of affairs in this field.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.8
• /
• pp.1182-1185
• /
• 2002

The objective of this study was to investigate the effect of long light regime (20 h light and 4 h dark, 20L:4D) and short light regime (4 h light and 20 h dark, 4L:20D) on egg production and egg characteristics of laying geese. Thirty-six laying birds, 4 replicates of 3 birds per treatment were allotted to three light regimes, i.e., 20L:4D, 4L:20D, and natural light (NAT) from March 7 to June 20. Results showed that the geese in 20L:4D consumed 54 g less feed per goose daily and laid 17.5 less eggs per goose (p<0.05) comparing to those in 4L:20D. The number of days from initiation of light treatment till cease of laying was 22 days shorter (p<0.05) in 20L:4D comparing to that in NAT. Five geese (41.7%) in 4L:20D kept laying by the end of applying light regime. Weight and surface area of the eggs in 4L:20D were greater (p<0.05) comparing to those in the other two light regimes. It is concluded that the period of egg production in goose could be manipulated by light regime in the ways such as using short light regime of 4 h light daily to prolong egg production through summer and using long light regime of 20 h light daily to induce cease of egg production.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.265-285
• /
• 1999

The purposes of this investigation were to observe the reaction kinetics of five commercial dual cured resin cements (Bistite, Dual, Scotchbond, Duolink and Duo) when cured under varying thicknesses of porcelain inlays by chemical or light activation and to evaluate the effect of the porcelain disc on the rate of polymerization of dual cured resin cement during light exposure by using thermal analysis. Thermogravimetric analysis(TGA) was used to evaluate the weight change as a function of temperature during a thermal program from $25{\sim}800^{\circ}C$ at rate of $10^{\circ}C$/min and to measure inorganic filler weight %. Differential scanning calorimetry(DSC) was used to evaluate the heat of cure(${\Delta}H$), maximum rate of heat output and peak heat flow time in dual cured resin cement systems when the polymerization reaction occured by chemical cure only or by light exposure through 0mm, 1mm, 2mm and 4mm thickness of porcelain discs. In 4mm thickness of porcelain disc, the exposure time was varied from 40s to 60s to investigate the effect of the exposure time on polymerization reaction. To investigate the effect on the setting of dual cured resin cements of absorption of polymerizing light by porcelain materials used as inlays and onlays, the change of the intensity of the light attenuated by 1mm, 2mm and 4mm thickness of porcelain discs was measured using curing radiometer. The results were as follows 1. The heat of cure of resin cements was 34~60J/gm and significant differences were observed between brands (P<0.001). Inverse relationship was present between the heat of reaction and filler weight % the heat of cure decreased with increasing filler content (R=-0.967). The heat of reaction by light cure was greater than by chemical cure in Bistite, Scotchbond and Duolink(P<0.05), but there was no statistically significant difference in Dual and Duo(P>0.05). 2. The polymerization rate of chemical cure and light cure of five commercially available dual cured resin cements was found to vary greatly with brand. Setting time based on peak heat flow time was shortest in Duo during chemical cure, and shortest in Dual during light cure. Cure speed by light exposure was 5~20 times faster than by chemical cure in dual cured resin cements. The dual cured resin cements differed markedly in the ratio of light and chemical activated catalysts. 3. The peak heat flow time increased by 1.51, 1.87, and 3.24 times as light cure was done through 1mm, 2mm and 4mm thick porcelain discs. Exposure times recommended by the manufacturers were insufficient to compensate for the attenuation of light by the 4mm thick porcelain disc. 4. A strong inverse relationship was observed between peak heat flow and peak time in chemical cure(R=0.951), and a strong positive correlations hip was observed between peak heat flow and the heat of cure in light cure(R=0.928). There was no correlationship present between filler weight % or heat of cure and peak time. 5. The thermal decomposition of resin cements occured primarily between $300^{\circ}C$ and $480^{\circ}C$ with maximum decomposition rates at $335^{\circ}C$ and $440^{\circ}C$.

• The Korean Journal of Ecology
• /
• v.19 no.2
• /
• pp.125-139
• /
• 1996

The relationships between environmental factors and the establishment and growth of oak seelings were studied in the greenhouse. The early seedling performances of three oak species (Quercus mongolica, Quercus serrata, Quercus variabilis) were compared. Mean seed weight was the biggest in Q. variabilis, and the smallest in Q. serrata, and the germination rate was higher in Q. variabilis than in Q. mongolica and Q. serrata. The germination rate was significantly affected by seed weight class in Q. serrata, but not in Q. mongolica. Emergence of oak seedlings was similar in all three oak species, and especially the first leaf emergence increased about twenty days after germination. An experiment was designed using three environmental factors (light, soil moisture, fertilizer) to compare the response of the three oak species. Light and soil moisture significantly affected the seedling height growth of Q. variabilis, but the effect was marginal in Q. mongolica and Q. serrata. However, growth of seedling biomass was significant in all three oak species. In contrast, fertilizer did not affect seedling growth of any of the oak species. Q. variabilis is expected to grow well in large gaps because it is very sensitive and responds well to high light and high moisture conditions. Q. mongolica and Q. serrata are relatively tolerant to shade but may need gaps for the seelings to grow into saplings.