• 원예과학기술지
• /
• 제32권4호
• /
• pp.493-498
• /
• 2014

본 연구는 완전제어형 식물공장에서 선형 지수 함수를 이용하여 common ice plant의 생육과 수량 모델을 개발하고자 수행되었다. 식물공장 유형은 완전제어형 식물공장형태로 인공광원은 삼파장 형광등을 사용하였으며, 광주기는 12시간 일장주기였다. 광도는 $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$로 조절하였다. 수경재배시스템은 3단으로 구성된 박막수경(NFT)시스템이었다. 식물공장내 온도, 상대습도와 이산화탄소 농도는 ON/OFF 제어하였다. 선형 지수 함수를 사용한 common ice plant의 정식 후 일수, 적산온도 및 적산일사량에 따른 엽면적, 단위 면적당 지상부 생체중과 건물중 및 광사용효율은 선형 지수적인 형태들을 보였다. 개체당 지상부 생체중과 개체당 지상부 건물중간의 관계는 직선적인 관계를 보였으며, 정식 후 30일째 common ice plant의 광사용효율(light use efficiency)은 $3.3g{\cdot}MJ^{-1}$이었다. 결론적으로, 선형 지수 함수는 완전제어형 식물공장에서 common ice plant의 생육과 수량을 정량적으로 예측하는데 유용한 함수로 사용될 수 있었다.

• International Journal of Automotive Technology
• /
• 제1권2호
• /
• pp.89-94
• /
• 2000

As a promising catalyst reducing cold start emissions of automobiles, a photocatalyst systems has been studied. Since the photocatalyst is only activated by UV wavelength light, it needs no heat energy like a conventional TWC, therefore no light-off time. However, as a cold temperature catalyst to treat cold start emissions of a vehicle, previous studies on characteristic of photocatalyst have room for improvement in terms of performance and durability investigated from the viewpoints of performance and durability improvement. Eleven different coating samples were prepared with the combination of six kinds of additives and two kinds of photocatalyst materials. Then these samples were aged with a hydrothermal aging process. The performance of these samples was measured on a model gas apparatus with simulated exhaust gases. The durability was also analyzed with X-ray diffraction meter.

• 한국인터넷방송통신학회논문지
• /
• 제14권6호
• /
• pp.207-213
• /
• 2014

본 논문에서는 블루투스 기반의 효율적인 실내 감성조명 제어 시스템을 제안한다. 제안된 블루투스 기반의 실내 감성조명 제어 시스템은 블루투스 모듈을 이용해 모바일이나 PC, 월 패드로 점등제어 할 수 있으며, 모션 센서로 자동 점등제어가 가능하게 설계하였다. 또한, 온도, 습도, 조도, 모션 센서로 외부환경에 따라 LED 점 소동을 제어하고, 움직임 미감지시에는 패턴을 이용하여 점등제어하게 설계하였다. 시스템은 블루투스 기반으로 조명 센서를 사용하고, 원하는 조명 제어를 선택하여 자동 제어 할 수 있다. 제안하는 실내 감성조명 제어 시스템의 효율성 검증 결과 기존 단순 On/Off의 제어 시스템보다 전력 소비를 감소시켰고, 에너지 절감 효과를 극대화 할 수 있었으며, 거주자에게 적합하게 내부 환경을 제공할 수 있도록 설계하였다.

• 디지털융복합연구
• /
• 제11권4호
• /
• pp.229-234
• /
• 2013

본 연구의 목적은 감성조명용 조명기기의 조도 및 색온도 표현능력을 극대화할 수 있는 최적의 광원조합을 효율적으로 제어할 수 있는 제어장치를 개발하는데 있다. 실내조명으로 사용할 수 있는 다양한 색온도에 대하여 사람이 편안함을 느끼는 조도영역을 찾아내고 이를 조합함으로서 감성조명을 실현할 수 있다. 이를 위하여 감성조명용 조명기기는 2000K와 8000K의 서로 다른 색온도를 가지는 형광램프로 구성하였으며 각각의 형광램프의 수량을 변화시키며 조명기기의 조도 및 색온도 표현능력을 광학 시뮬레이션을 통하여 평가하였다. 사용자가 원하는 조명환경을 휴식, 대화, 모임, 손님접대, 예술 등의 5가지로 구분하여 적외선 리모콘으로 수신단에 전송하면 수신단에서 PC0~PC4 병렬포트를 통해서 사용자가 선택한 모드에 맞는 DC전압을 출력한다. DC전압이 EEFL 인버터에 입력되고 입력된 DC전압 레벨에 따라 EEFL의 dimming 값이 변하면서 사용자가 원하는 조명환경(조도 및 색온도)를 만들고 인체감지센서를 사용하여 사람이 없을 경우에는 EEFL을 자동으로 꺼지도록 함으로써 소비전력을 절약할 수 있도록 개발하였다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2020년도 추계국제학술대회
• /
• pp.61-61
• /
• 2020

This experiment was carried out using artificial bed soil and LED in the plastic film house(irradiation time: 07:00-17:00/day). Seedlings(n=63 per 3.3 m²) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity(40-160 µmol/m²/s). Average air temperature from April to September according to the light intensity test was 20.4℃-20.9℃. Average artificial bed soil temperature was 20.1℃-21.7℃. The test area where fluorescent lamp was irradiated tended to be somewhat lower than the LED irradiation area. The chemical properties of the test soil was as follows. pH levels was 6.6-6.7, EC levels 0.9-1.3 dS/m and OM levels 30.6-32.0%. The available P₂O₅ contents was 73.3-302.3 mg/kg. Exchangeable cations K and Ca contents were higher than the allowable ranges and mg content was high in the fluorescent lamp treatment. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PPFD(Photosynthetic Photon Flux Density) value, illuminance and solar irradiation. Fluorescent lamp treatment had high illuminance value, but PPFD and solar irradiation were lower than LED intensity 40 µmol/m²/s treatment. The photosynthetic rate increased(2.0-3.8 µmolCO²/m²/s) as the amount of light intensity increased, peaking at 120 µmol/m²/s, and then decreasing. The SPAD (chlorophyll content) value decreased as the amount of light intensity increased, and was the highest at 36.1 in fluorescent lamp treatment. Ginseng germination started on April 5 and took 14-17 days to germinate. The overall germination rate was 68.8-73.6%. The growth of aerial parts(plant height etc.) were generally excellent in the treatment of light intensity of 120-160 µmol/m²/s. The plant height was 41.9 cm, stem length was 24.1 cm, leaf length was 9.8 cm and stem diameter was 5.6 mm. The growth of underground part (root length etc.) was the best in the treatment with 120 µmol/m²/s of light intensity. Due to the root length was long(24.8 cm) and diameter of taproot was thick(18.7 mm), the fresh root weight was the heaviest at 24.8 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping-off caused by Rhizoctonia solani occurred 0.6-1.5% and incidence ratio of rusty root ginseng was 30.8-62.3%. It is believed that the reason for the high incidence of rusty root ginseng is that the amount of field moisture capacity of artificial bed soil is larger than the soil. Leaf discoloration rate was 13.7-32.3%.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제20회 KOSCO SYMPOSIUM 논문집
• /
• pp.152-161
• /
• 2000

The catalytically stabilized combustion of $CH_4$-air mixture on platinum catalyst was investigated numerically using a 2-D boundary layer model with detailed heterogeneous and homogeneous chemistries. The actual surface site density of monolith coated with platinum was decided by the comparison with experimental data. The comparisons were made between results for cases where only heterogeneous chemistry was allowed and both heterogeneous and homogeneous chemistries were allowed. It was found that the homogeneous reaction in the monolith had little effect on the change of temperature profile, methane conversion rate and light off location. The contributions of each reactions related with CO formation were discussed on the surface. The effects of operation conditions such as equivalence ratio, temperature, velocity and pressure at the entrance were studied. In thermal combustor, CO and NOx was produced less than 1 ppm at the exit and the production of $N_{2}O$ was more dominant than that of NO.

• Journal of Ceramic Processing Research
• /
• 제20권3호
• /
• pp.276-279
• /
• 2019

New green-emitting Sr4ScAl3O10:Eu2+ phosphor was prepared using a novel melt quenching synthesis method. The temperature of raw materials irradiated with the strong light of the Xe arc-lamp was rose up to about 2273 K, followed by a sharp drop in the temperature after turn off the lamp. This method is a useful tool for rapid screening of novel phosphor materials.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 추계학술대회
• /
• pp.45-45
• /
• 2019

This experiment was carried out using artificial clay and LED in the plastic film house (irradiation time: 08:00~18:00/day). Seedlings (n = 63 per $3.3m^2$) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity. The average air temperature from April to September was $12.3^{\circ}C$ $-26.0^{\circ}C$ and it was the the highest at $26.0^{\circ}C$ in August. The test area where fluorescent lamp was irradiated tended to be somewhat higher than the LED irradiation area. The chemical properties of the test soil are as follows. pH levels was 5.3~5.5, EC levels 0.45~0.52 dS/m and OM levels 33~37%. The total nitrogen content was 0.35~0.47% and the available $P_2O_5$ contents was 13.7~16.0 mg/kg, which was lower than the suitable level of 70~200 mg/kg. Exchangeable cations K and Mg contents were within acceptable ranges, but the Ca contents was $28{\sim}38cmol^+/kg$ levels higher than the permissible level ($2{\sim}6cmol^+/kg$). Germination of ginseng leaves took 8~9 days and the overall germination rate was 70~75%. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PAR (Photosynthetic Action Radiation) value, illuminance and solar irradiation. Photosynthetic rate was also increased with higher light intensity was investigated at $1.7{\sim}3.2{\mu}mol\;CO_2/m^2/s$. Leaf temperature ($23.7{\sim}24.8^{\circ}C$) by light intensity was the same trend. The growth of aerial parts (plant height etc.) were generally excellent when irradiated with 3 times the light intensity, the growth of the ginseng aerial parts were excellent as follows. The plant height was 42.6 cm, stem length was 25.2 cm, leaf length was 9.6 cm and stem diameter was 5.0 mm. The growth of underground part (root length etc.) was the same, and the root length was 24.4 cm, the tap root length was 6.0 cm, diameter of taproot was 18.2 mm and the fresh root weight was 17.2 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping off occurred 2.2~3.6% and incidence ratio of rusty root ginseng was 14.6~20.7%. Leaf discoloration rate was 13.7~48.9% and increased with increasing light intensity. Ginsenoside content of ginseng by light intensity is under analysis.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.129-135
• /
• 2015

This paper shows significant methods that improve the lifespan of LED modules as well as efficiently using an aluminum heat-sink for LED module in high power. It proposes a method that raises stability and lifespan to protect LED modules and the power unit when the LED module has been used for a long hours at high temperatures. During the research, we applied a method of pulse-width modulation (PWM) in order to prevent the phenomenon that the entire power of a system is turned off and the lifespan is reduced when the LED nodule reacts to the high temperatures. To protect the LED module and SMPS based on high efficiency, a temperature sensor is attached underneath the circuit board and the sensor measures the temperature of circuit board when the LED module is powered on. The electrical power connected to SMPS is controlled by PWM when the temperature of the LED module reaches a particular temperature.

• 한국버섯학회지
• /
• 제16권4호
• /
• pp.331-333
• /
• 2018

The incorporation of Shiitake culture into sawdust is a widely utilized technique that can assist in reducing the cost and time consumption associated with oak cultivation. In sawdust cultivation, browning of the surface mycelia is an important stage with respect to the utility and longevity of the sawdust media. Surface browning forms a protective coating on the substrate, which can inhibit the invasion of pathogens and suppress water evaporation. Several different light sources (red LED, white LED, blue LED, and fluorescent light) were used and the intensity of illumination was carefully controlled (1.5, 10.5, $20.5{\mu}mol/m^2s$ for LEDs and 10, 100, 300 lux for the fluorescent light) to induce browning. The light sources were regulated via a 1 h on/off cycle in a controlled room environment at a temperature of $20^{\circ}C$, 60% humidity, and 1200 ppm $CO_2$ concentration for 60days. The browning effect varied depending on the source and the intensity of illumination. This effect was most effectively induced at $1.5{\mu}mol/m^2s$ for the red and blue LEDs. All light sources induced less browning at the highest intensity of illumination. This indicates that intensity values higher than $20.5{\mu}mol/m^2s$ in the case of the LEDs and 300 lux for the fluorescent light are not effective. After harvesting of the fruit bodies, we measured the weight, length, and width of the pileus and stipe in addition to their chromaticity and hardness. Treatment with $1.5{\mu}mol/m^2s$ blue LED produced the best harvest with the highest average chromaticity, weight (21.2 g), stipe length (30.8 mm), and hardness (377.9 g), with a fine length and width of the pileus.