• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.1
• /
• pp.55-65
• /
• 2002

In this study, the procedures for the preliminary design of the turbo-shaft engine for the light multi-purpose helicopter are established. The engine specifications are determined through the performance analysis on the on-design and off-design conditions by the use of simulation program. In addition, the effect of humidity on the engine performance is examined by considering the change of the gas properties and characteristic maps due to moisture contents. The calculation results show that the engine power is reduced by the existence of moisture in working fluid.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.3
• /
• pp.1-9
• /
• 2011

In this paper, a conceptual design process for Very Light Jet aircraft has been proposed incorporating aircraft safety certification. During the proposed design process, satisfaction of the airworthiness certification for an intermediate resulting aircraft configuration is evaluated and then redesigns are carried out if necessary and until the designed aircraft configuration satisfies the airworthiness requirements. Certification database has been developed using FAR 23, AC 23, KAS 23, and CS 23 as the airworthiness certification. Based on the developed certification database Design Certifcation Related Table has been produced to use the airworthiness requirements as design constraints in the propsed design process. Using Quality Function Deployment the design variables for a redesign are carefully selected and a design optimization is performed. To demonstrate the feasibility and effectiveness of rapid aircraft conceptual design using the proposed approach, a Very Light Jet design optimization including a redesign of wing flap has been performed and the design results have been presented.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.83-90
• /
• 2009

White LEDs(Light Emitting Diode) offer advantageous properties such as high brightness, improved reliability, lower power consumption, and long lifetimes. An LED is an electronic device that converts an electrical signal into a tight signal and is used not only in Optical Communication Indoor wireless optical illuminating rooms, but also for wireless optical communication systems. Currently, studies about these white LEDs have been being progressed, and in this raper, we discuss the multiplex and the multiple access method of VLC(Visible Light Communication) systems using white LEDs. In proposed system, CDMA(Code Division Multiple Access) apples to VLC system to reduce interference of VLC system, and improve capacity. The superiority of OOK modulation is presented in analysis of results by comparing VLC-CDMA communication system using OOK(On-off keying) modulation and BPSK modulation in AWGN(Additive White Gaussian Noise) channel and Diffuse channel. And we investigate the significance of a solution of interference by multipath by comparing BER in multipath channel and AWGN channel. In the proposed system, we assume Directed LOS(Line Of Sight) and Diffuse Link, and suppose VLC-CDMA using OOC(Optical Orthogonal Code) as methods to increase efficiency of system by removing ISI(Inter Symbol Interference) caused by multiple access, optical spreading code, and also present an analysis of its performance.

• Journal of Industrial Convergence
• /
• v.21 no.2
• /
• pp.125-131
• /
• 2023

In this paper, research was conducted to solve the problem of reducing the dimming level and flicker that occurs in the visible light communication system. Visible light communication is a convergence technology that provides both communication and lighting, and must satisfy not only communication performance but also lighting performance. However, since the existing data transmission method transmits without considering the transmission data sequence, it reduces the dimming level and causes a flicker phenomenon. To solve this problem, in this paper, the Dimming Improvement and Flicker Reduction Mapping technique was studied. Existing systems simply transmitted data of '0' and '1', but in this system, original data transmission channels and DIFR (Dimming Improvement and Flicker Reduction) transmission channels are assigned to RGB channels. Original data is allocated to the R channel and original data or inverse original data is allocated to the DIFR-G channel, and the DIFR-B channel maintains the maximum dimming level by transmitting through the logical operation of the R channel and the G channel. At the same time, the flicker phenomenon is prevented by preventing continuous occurrence of 'OFF' patterns. Through this, we proposed an adaptive data allocation algorithm that can faithfully play a role as a light as well as a communication function.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3A
• /
• pp.189-197
• /
• 2011

OFDM systems are much studied for the recent high speed wireless optical communication system. OFDM system has basically high PAPR and ICI easily generated because of non-linearity and RF impairments. In the wireless optical communication system, optical output power driven by current of LED is not linear so that transmission signals are distorted. Therefore, research about reception performance of this nonlinear optical output emitted by non-linear LED transfer function and OFDM signal has been conducted. Nonlinear effect of LED is different from nonlinear effect of OFDM system in the conventional radio communication system, which degrades the BER performance. In this paper, we apply non-linear transfer function of recently studied LED into OFDM system. So, for reducing the PAPR and suppressing the ICI in frequency domain of receiver, we suggest a new PAPR reduction technique to reduce non-linear distortion of LED and an adaptive ICI suppression algorithm so that BER performance may be improved. Also, the proposed method is verified through simulation results.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.1
• /
• pp.35-42
• /
• 2022

Visible light communication (VLC) is a method of transmitting data through LED blinking and is vulnerable to eavesdropping because the illumination affects the wide range of area. IEEE standard 802.15.7 defines On-Off Keying (OOK), Variable Pulse Position Modulation (VPPM), and Color Shift Keying (CSK) as modulation. In this paper, we propose an encryption method in VPPM for secure communication. The VPPM uses an encoding method called 4B6B where 16 different outputs are represented with 6-bit. This paper extends the number of outputs to 20, to add complexity while not violating the 4B6B generation conditions. Then each entry in the extended 4B6B table is scrambled using vigenère cipher. The probability of decrypting each 6-bit data is $\frac{1}{20}$. Eavesdropper should perform $\sum\limits_{k=1}^{n}20^k$ number of different trials to decrypt the message if the number of keys is n. The proposed method can be applied to OOK of PHY II and CSK of PHY III. We further discuss the secure encoding that can be used in OOK and CSK without performance degradation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.2
• /
• pp.190-196
• /
• 2004

ACR(All Clear Reflector), also widely referred to as FFR(Free Form Reflector), were designed in general and intelligent ways using a NUDBS surface for the mathematical modelling of the reflector shape and artificial intelligence as the optimum design algorithm. An ACR, which consists of a continuous surface reflector and clear outer lens, offers styling advantages and provides a high quality light performance. The clear outer lens of an ACR remains efficient even with a highly inclined shape, as in the design of a sports car, as well as the complete clearness of the reflector surface eliminates the nuisance of stray light caused by the steps between adjacent segments of multi-faced reflectors. The application of an ACR to low beam lamp was so sucessful to obtain the sharp cut-off with the lens-free single-surfaced-smooth reflector. The design technique of ACR was tested with all types of lamps, including low beams, high beams, and fog lamps.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.355-355
• /
• 2010

We studied the dependence of the performance of schottky barrier metal-oxide-field effect transistors(SB MOSFETs) on the work function of source/drain metals. A strong impact of the various work functions and the light wavelengths on the transistor characteristics is found and explained using experimental data. We used an insulator of a high thickness (100nm) and back gate issues in SOI substrate, subthreshold swing was measured to 300~400[mV/dec] comparing with a ideal subthreshold swing of 60[mV/dec]. Excellent characteristics of Al/Si was demonstrated higher on/off current ratios of ${\sim}10^7$ than others. In addition, extensive photoresponse analysis has been performed using halogen and deuterium light sources(200<$\lambda$<2000nm).

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.56.4-57
• /
• 2017

The Schwarzschild-Chang off-axis telescope is a "linear astigmatism-free" confocal system. The telescope comprises two pieces of aluminum-alloy freeform mirrors that are fabricated with diamond turning machine (DTM) process. We designed optomechanical structures where optical components in the telescope system can be adjustable on a linear stage. Optomechanical deformation caused by the weight of system itself and its temperature variation is analyzed by the finite element analysis (FEA). The results show that the deformation is estimated in the tolerance range. For the optic-axis alignment of telescope system, three-point alignment (TPA) method is chosen. The TPA method uses three parallel lasers and a plane mirror. Point source images were taken from collimated light and field observation. The performance of optical system was tested by point spread function and aberration measurement of the point sources.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.422-430
• /
• 2018

Rolling shutter operation of CMOS cameras can be utilized in optical camera communications in order to transmit data from an LED to mobile devices such as smart-phones. From temporally modulated light, a spatial flicker pattern is obtained in the captured image, and this is used for signal recovery. Due to the degradation of rolling shutter images caused by light smear, motion blur, and focus blur, the conventional decoding schemes for rolling shutter cameras based on the pattern width for 'OFF' and 'ON' cannot guarantee robust communications performance for practical uses. Aside from conventional techniques, such as polynomial fitting, histogram equalization can be used for blurry light mitigation, but it requires additional computation abilities resulting in burdens on mobile devices. This paper proposes a transition-based decoding scheme for rolling shutter cameras in order to offer simple and robust data decoding in the presence of image degradation. Based on the designed synchronization pulse and modulated data symbols according to the LED dimming level, the decoding process is conducted by observing the transition patterns of two sequential symbol pulses. For this, the extended symbol pulse caused by consecutive symbol pulses with the same level determines whether the second pulse should be included for the next bit decoding or not. The proposed method simply identifies the transition patterns of sequential symbol pulses other than the pattern width of 'OFF' and 'ON' for data decoding, and thus, it is simpler and more accurate. Experimental results ensured that the transition-based decoding scheme is robust even in the presence of blurry lights in the captured image at various dimming levels