• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.192-195
• /
• 2009

We developed highly efficient blue PHOLEDs with reduced roll-off by using a mixed host structure. The balanced charge carrier injection and the distributed recombination zone within emissive layer resulted in a highly stable efficiency roll-off with quantum efficiencies of 20.1 and 18.1 % at a luminance of 1000 and 10000 cd/$m^2$.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 추계학술발표논문집
• /
• pp.133-134
• /
• 2006

본 논문에서는 ITO/Glass 기판에 스핀 코팅법(Spin Coating)과 열 증착법(Thermal Evaporation)을 이용하여 ITO/PEDOT:PSS/PVK/PFO-poss/Li/Al 구조를 갖는 청색 고분자 유기전계발광소자를 제작하였다. 청색 고분자 유기발광다이오드 제작시 ITO 전극을 $O_2$ gas를 이용한 Plasma Treatment와 Heat Treatment를 실시하여 기판처리가 제작된 소자의 전기, 광학적 특성에 미치는 영향에 대하여 조사하였다. Plasma와 Heat Treatment를 동시에 처리한 소자에서 가장 우수한 전기, 광학적 특성을 나타냈으며, 기판처리를 하지 않은 경우는 전기, 광학적 특성은 크게 감소하였다.

• 한국전기전자재료학회논문지
• /
• 제14권11호
• /
• pp.922-927
• /
• 2001

Single-layer green ELs was fabricated with using molecularly-dispersed Bu-PBD into poly-N-vinylcarbazole(PVK) which has low operating voltage and high quantum efficiency. A EL cell structure of glass substrate/indium-tin-oxide/PVK:Bu-PBD:C6(∼ 100nm)/Ca(20nm)/Al(20nm) was employed with variable doping concentration. The keys to obtain high quantum efficiency was excellent film forming capability of molecularly dispersed into PVK and appropriate combination of cathode for avoiding exciplex. We obtained the turn-on voltage of 4.2V and quantum efficiency of 0.52% at 0.lmol% of C6 concentration which has been improved about a factor of 50 in comparison with the undoped cell. The PL peak wavelengths wouldn\`t be turned by changing the concentration of the C6 dopant. Green EL emission peak and FWHM were 520nm and 70nm respectively. PL emission peak was obtained at 495nm.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.627-627
• /
• 2013

Recently, most studies concerning inorganic CdSe/ZnS quantum dot (QD)-polymer hybrid LEDs have been concentrated on the structure with multiple layers [1,2]. The QD LEDs used almost CdSe materials for color reproduction such as blue, green and red from the light source until current. However, since Cd is one of six substances banned by the Restriction on Hazardous Substances (RoHS) directive and classified into a hazardous substance for utilization and commercialization as well as for use in life, it was reported that the use of CdSe is not suitable to fabricate a photoelectronic device. In this work, we demonstrate a novel, simple and facile technique for the synthesis of ZnO-graphene quasi-core.shell quantum dots utilizing graphene nanodot in order to overcome Cd material including RoHS materials. Also, We investigate the optical and structural properties of the quantum dots using a number of techniques. In result, At the applied bias 10 V, the device produced bluish-white color of the maximum brightness 1118 cd/$m^2$ with CIE coordinates (0.31, 0.26) at the bias 10 V.

• 전기화학회지
• /
• 제1권1호
• /
• pp.24-27
• /
• 1998

Electroluminescence (EL) comes from the light emission obtained by the electrical excitation energy passing through a phosphor layer undo. an applied high electrical field $(10^6 V/cm)$. The preparation of white and blue phosphors and characterizations of light emitting alternating current powder electroluminescent devices (ACPELDs) were investigated. In this work, we fabricated two kinds of ELDs, that is, yellow electroluminescent device (B-ELD), blue electroluminescent device (B-ELD). The basic st.uctures of Y-ELD and B-ELD are ITO (Indium Tin Oxide)/phosphor layer/Insulator layer/Carbon electrode and ITO/Phosphor layer/Insulating layer/carbon electrode, respectively. Another structures of ITO/Phosphor and Insulator mixture layer/Backelectrode are introduced. EL spectra and luminance of two types of ELDs were measured by changing voltage at fixed frequency 0.4kHz, 1.5kHz. Blue and yellow phosphors prepared in this work show $50cd/m^2\;and\;30cd/m^2$ of luminance at 400Hz, 150V.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.116.1-116.1
• /
• 2011

Materials with a combination of high electrical conductivity and optical transparency are important components of many electronic and optoelectronic devices such as liquid crystal displays, solar cells, and light emitting diodes. In this study, to fabricate a low-resistance and high optical transparent electrode film for organic photovoltaic, the following steps were performed: the design and manufacture of an electroforming stamp mold, the fabrication of thermal roll imprinted (TRI) poly-carbonate (PC) patterned films, the manufacture of high-conductivity and low-resistance Ag paste which was filled into patterned PC film using a doctor blade process and then coated with a thin film layer of conductive polymer by a spin coating process. As a result of these imprinting processes the PC films obtained a line width of $10{\pm}0.5{\mu}m$, a channel length of $500{\pm}2{\mu}m$, and a pattern depth of $7.34{\pm}0.5{\mu}m$. After the Ag paste was used to fill part of the patterned film with conductive polymer coating, the following parameters were obtained: a sheet resistance of $9.65{\Omega}$/sq, optical transparency values were 83.69 % at a wavelength of 550 nm.

• 폴리머
• /
• 제24권1호
• /
• pp.90-96
• /
• 2000

고분자 정공 전달체로 LB 기법에 의해 제조한 PDPMA 초박막과 발광층으로 Alq$_3$를 사용하여 유기 발광소자를 제작하였다. 표면활성제로 arachidic acid를 사용하여 안정한 PDPMA 단분자막을 얻을 수 있었다. PDPMA LB 필름의 두께와 320nm의 최대 흡광도는 층수의 증가에 따라 거의 선형적으로 증가하였다. ITO/PDPMA LB 필름(19층)/Alq$_3$/Al으로 구성된 유기 적층형 소자는 DC 14V에서 2500 cd/m$^2$의 높은 휘도를 갖는 녹색 빛을 발광하였다. 특히 PDPMA LB 필름의 층이 15로 이루어진 발광소자의 구동전압은 4V의 매우 낮은 값을 나타내었다. PDPMA LB 필름의 두께 조절 및 분자 배향에 따른 EL 성능에 미치는 영향에 관하여도 검토하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.394-394
• /
• 2009

Water solubility of conjugated polymers may offer many applications. Potential applications of water-soluble conjugated polymers include the polymer light-emitting diode and new materials for nano and micro hollow-capsules, and bio- or chemo-sensors. We synthesized neutral polyfluorenes containing bromo-alkyl groups by the palladium catalyzed Suzuki coupling reaction. Bromo-alkyl side groups in neutral polyfluorenes were quaternized by tri-methyl amine solution. The electrochemical and optical properties of water-soluble conjugated polymers are discussed. This novel synthesized water-soluble conjugated polymers were used as a interfacial dipole layer between active layer and metal cathode in polymer solar cell for enhancement of open-circuit voltage (Voc), which is one of the most critical factors in determining device characteristics. We also investigated the device performance of polymer solar cell with different metal cathode such as Al, Ag, Au and Cu. In polymer solar cell, novel cationic water-soluble conjugated polymers were inserted between active layer and high-work function cathode (Al, Ag, Au and Cu).

• 마이크로전자및패키징학회지
• /
• 제14권4호
• /
• pp.37-42
• /
• 2007

본 연구에서는 ITO/PEDOT:PSS/PFO:MEH-PPV/LiF/Al의 구조를 갖는 고분자 유기발광다이오드를 제작하여 정공 주입층으로 사용되는 PEDOT:PSS의 두께 변화와 PVK 정공 수송층을 도입하여 ITO/PEDOT:PSS/PVK/PFO:MEH-PPV/LiF/Al 구조를 갖는 고분자 유기발광 다이오드를 제작하여 정공수송층이 유기발광다이오드의 전기 광학적 특성에 미치는 영향에 대하여 조사, 비교하였다. 실험에 사용된 모든 유기물은 플라즈마 처리된 ITO/glass 기판위에 스핀 코팅법으로 도포하였다. 정공 주입층인 PEDOT:PSS 두께를 약 80 nm에서 50 nm로 감소한 경우 PLED 소자의 휘도는 약 $220cd/m^2$ 에서 $450cd/m^2$으로 크게 증가하였다. 이러한 결과는 정공 주입층의 두께가 감소할수록 ITO 전극에서 발생한 정공이 보다 쉽게 발광막으로 전달되기 때문이다. 또한 PVK 정공 수송층을 도입한 PLED소자에서 최대 전류밀도와 휘도는 $268mA/cm^2$ 와 $540cd/m^2$ (at 12V)의 값을 각각 나타내었다. PVK 정공 수송층이 도입되지 않은 소자에 비해 전류밀도는 약 14%, 휘도는 약 22%의 특성개선을 나타내었다.

• The Journal of Advanced Prosthodontics
• /
• 제7권5호
• /
• pp.386-391
• /
• 2015

PURPOSE. The purpose of this preliminary study was to investigate the effects of adding 4,4'-bis(N,N-diethylamino) benzophenone (DEABP) as a co-initiator to a binary photoinitiating system (camphorquinone-amine) to analyze on the degree of conversion (DC) of a light-cured resin for dental 3D printing. MATERIALS AND METHODS. Cylindrical specimens (N=60, n=30 per group, ${\phi}5mm{\times}1mm$) were fabricated using bisphenol A glycerolate dimethacrylate (BisGMA) both with and without DEABP. The freshly mixed resins were exposed to light in a custom-made closed chamber with nine light-emitting diode lamps (wavelength: 405 nm; power: $840mW/cm^2$) for polymerization at each incidence of light-irradiation at 10, 30, 60, 180, and 300 seconds, while five specimens at a time were evaluated at each given irradiation point. Fourier-transform infrared (FTIR) spectroscopy was used to measure the DC values of the resins. Two-way analysis of variance and the Duncan post hoc test were used to analyze statistically significant differences between the groups and given times (${\alpha}$=.05). RESULTS. In the DEABP-containing resin, the DC values were significantly higher at all points in time (P<.001), and also the initial polymerization velocity was faster than in the DEABP-free resin. CONCLUSION. The addition of DEABP significantly enhanced the DC values and, thus, could potentially become an efficient photoinitiator when combined with a camphorquinone-amine system and may be utilized as a more advanced photopolymerization system for dental 3D printing.