• 한국지반환경공학회 논문집
• /
• 제3권2호
• /
• pp.61-70
• /
• 2002

본 논문은 폐 Styrofoam과 현장발생토를 활용하여 경량 성토재로서의 특성을 파악하고자 하는데 목적이 있다. 폐 Styrofoam 입자는 가볍고 단열성이 좋으며 진동차단효과도 우수하기 때문에 경량 성토재로서의 활용이 가능하다. 특히 Styrofoam은 1996년 재활용 품목으로 선정되어 토공재료로서의 적합성만 확인된다면 체계적인 공급이 가능하다. 따라서 본 논문에서는 폐 Styrofoam 혼합토의 동적 다짐시험, 정적 다짐시험, pH 및 용출실험을 하였으며, 그 결과 효율적인 다짐관리를 위해서는 정적 다짐방식으로 다짐관리가 이루어져야 하며, 경량 성토재의 환경적 위해성 평가결과 pH는 지정폐기물 판정기준을 만족하는 것으로 나타났다.

• 한국멀티미디어학회논문지
• /
• 제25권1호
• /
• pp.39-51
• /
• 2022

Image-based gender classification and age estimation of human are classic problems in computer vision. Most of researches in this field focus just only one task of either gender classification or age estimation and most of the reported methods for each task focus on accuracy performance and are not computationally light. Thus, running both tasks together simultaneously on low cost mobile or embedded systems with limited cpu processing speed and memory capacity are practically prohibited. In this paper, we propose a novel light-weight gender classification and age estimation method based on ensemble multitasking deep learning with light-weight processing neural network architecture, which processes both gender classification and age estimation simultaneously and in real-time even for embedded systems. Through experiments over various well-known datasets, it is shown that the proposed method performs comparably to the state-of-the-art gender classification and/or age estimation methods with respect to accuracy and runs fast enough (average 14fps) on a Jestson Nano embedded board.

• Journal of Ginseng Research
• /
• 제6권1호
• /
• pp.38-45
• /
• 1982

To determine the optimum light intensity for growth of ginseng plants, change of temperature, moisture content in son, occurrence alternaria blight, defoliation rate, chlorophyll contents, and growth of shoots and roots were investigated under different light intensity such as 5%, 10%, 20% and 30% light transmittance rare(L.T.R.). The results obtained were as follows. 1. Maximum temperature under the shading was increased as the increase of light intensity, whereas soil moisture content decreased 2. As the increase of light intensity, stem and Peduncle length, leaf area, and chlorophyll contents decreased significantly but length and width of the leaf was not significant, while stem diameter, special leaf weight and chlorophyll a/chl. b ratio increased 3. Stem color was shown dark purp!e as the increase of light intensity. 4. Photosynthesis during the day was highest at 9 A.M. and decreased as time passed in all plots. The means of photouynthesis during the day showed in the order of 20%, 10%, 30%, 5% L.T.R., and optimum light intensity for highest photosxthesis was 18.4% L.T.R. by theoritical equation. 5. It was showed a tendency that alternaria leaf blight of ginseng plants was increased as the increase of light intensity. 6. Defoliation rate of ginseng plants was increased as the increase of light intensity, especially all plants were defoliated by late June without shading. 7. Yield percentage of the rear line was increased as the increase of light intensity. Root weight per plant showed in the order of 20%, 10%, 30%, 5% L.T.R., and optimum light intensity for the best yield was 18.5% L.T.R. by theeritical equation.

• KIEAE Journal
• /
• 제10권3호
• /
• pp.89-96
• /
• 2010

In comparison with ordinary or heavy-weight concrete, light-weight air void concrete has the good aspects in optimizing super tall structure systems for the process of design considering wind load and seismic load by lightening total dead load of buildings and reducing natural resources used. Light-weight air void concrete has excellent properties of heat and sound insulating due to its high amount porosity of air voids. So, it has been used as partition walls and the floor of Ondol which is the traditional Korean floor heating system. Under the condition of which the supply of light-weight aggregates are limited, the development of light-weight concrete using air voids is highly required in the aspects of reduced manufacturing prices and mass production. In this study, we investigated the physical properties and thermal behaviors of specimens that applied different mixing ratios of foaming agent to evaluate the possibility of use in the structural elements. We proposed the estimating equation for compressive strength of each mix having different ratio of foaming agent. We also confirmed that the density of cement matrix is decreased as the mixing amount of foaming agent increase up to 0.6% of foaming agent mixing ratio which was observed by SEM. Based on porosity and compressive strength of control mortar without foaming agent, we built the estimating equations of compressive strength for mortars with foaming agent. The upper limit of use in foaming agent is about 0.6% of the binder amount. Each air void is independent, and size of voids range from 50 to $100{\mu}m$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.177-180
• /
• 2008

최근에 철근콘크리트 구조물에서 철근의 부식문제를 해결하기 위하여 FRP bar를 철근의 대체제로 사용하려는 연구가 활발히 진행되고 있다. FRP bar는 비부식성 뿐만 아니라 철근에 비하여 자중이 작으면서도 고강도를 갖는 특성을 갖고 있다. 따라서 FRP bar가 경량골재콘크리트와 함께 사용된다면 해양에 부유되는 구조물등에서 우수한 특성을 발휘할 수 있을 것으로 예상된다. 그러나 현재까지 경량콘크리트에 FRP bar를 휨보강근으로 사용하는 구조체에 대한 연구는 거의 전무한 실정이다. 본 연구에서는 GFRP bar 경량콘크리트보에 대하여 콘크리트의 전단력 기여분을 조사하기 위하여 콘크리트 압축강도와 휨보강근비를 변수로 하는 일련의 실험을 행하였으며 이 결과를 분석하였다. 연구결과, 선행 연구에서 제안된 식에 0.75배를 곱하여 구한 콘크리트의 전단력은 실험결과와 잘 일치하였으며, ACI 440.1R-06에서 제시한 식에 의한 결과보다 더 우수한 값을 주는 것으로 나타났다.

• 한국산림과학회지
• /
• 제76권3호
• /
• pp.218-229
• /
• 1987

본(本) 연구(硏究)는 광환경(光環境) 및 근장(根長)의 정도(程度)를 각기 달리한 잣나무 유묘(幼苗)의 중량(重量) 생장(生長)을 측정(測定) 고찰(考察)한 것으로 그 결과(結果)는 다음과 같았다. 1) 묘목(苗木)의 중량(重量) 생장(生長)은 상대광도(相對光度) 63%구(區)가 가장 높게 나타났으나 전체적(全體的)으로는 피음(被陰)의 정도(程度)가 강(強)할 수록 점차(漸次)로 감소(減少)하는 경향(傾向)을 보였으며, 단근(斷根) 처리(處理)의 경우는 1/4 단근구(斷根區)가 타(他) 처리구(處理區)에 비(比)해 제일 높았다. 2) 묘목(苗木)의 T/R율(率)값은 광도(光度)가 낮았을 때와 단근(斷根) 정도(程度)가 강(強)할 수록 각각(各各) 그 값이 점차(漸次)로 높게 나타나서 결국(結局) 피음(被陰) 및 단근(斷根)의 정도(程度)가 강(強)할 수록 묘목(苗木)의 생장(生長)은 약세(弱勢)를 나타냈다. 3) 그리고 광도(光度) 및 단근량(斷根量)과 T/R율(率) 간(間)에는 2차(次) 회귀관계(回歸關係)에 있음을 알 수 있었다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1990년도 제12회 학술강연회초록집
• /
• pp.58-62
• /
• 1990

The size and concentration of wear debris in lubricating oil often reveal the operating condition of the rotating machinery. To evaluate the possible application of light attenuation measurement for the estimation of wear debris concentration in the lubricating oil, the light transmittance through the lubricating oil cell contaminated with various concentrations of diatomite particles was measured, the attenuation coefficient was estimated from the transmittance measurement and the coefficients were compared with those obtained from the scattering theory. The comparision showed good agreements between them. It is also noted that the experimentally determined attenuation coefficient showed almost linear relation with particle weight concentrations for the concentrations within the range of 2000 ppm. For the case of 0 ppm weight concentration of diatomite particles in the lubricating oil cell, the thickness of the cell required to give $100 \mu W$ light attenuation is 7.75 mm. This result indicates that the light attenuation method will be one of the possible candidates of machine failure diagnostic sensors for the estimation of wear debris concentration in the lubricating oil.

• Tribology and Lubricants
• /
• 제6권2호
• /
• pp.94-98
• /
• 1990

The size and concentration of wear debris in lubricating oil often reveal the operating condition of the rotating machinery. To evaluate the possible application of light attenuation measurement for the estimation of wear debris concentration in the lubricating oil, the light transmittance through the lubricating oil cell contaminated with various concentrations of diatomire particles was measured, the attenuation coefficient was estimated from the transmittance measurement and the coefficients were compared with those obtained from the scattering theory. The comparision showed good agreements between them. It is also noted that the experimentally determined attenuation coefficient showed almost linear relation with particle weight coucentrations for the concentrations within the range of 2000 ppm. For the case of 0 ppm weight concentration of diatomire particles in the lubricating oil cell, the thickness of the cell required to give $100 \muW$ light attenuation is 7.75 mm. This result indicates that the light attenuation method will be one of the possible candidates of machine failure diagnostic sensors for the estimation of wear debris concentration in the lubricating oil.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.56-60
• /
• 1999

In this paper, a series of amphoteric polyacrylamide(PAM) with different molecular weight and charge were synthesized and used as retention and dewatering aids. Better products had been selected and tested under varied conditions. Effects of molecular weight, cationic charge density, degree of hydrolysis and other factors of PAM on retention and dewatering of papermaking were also considered. Finally, synthesized quaternary and tertiary ammonium amphoteric polyacrylamide were practised in paper mill trial.

• 한국건설순환자원학회논문집
• /
• 제9권3호
• /
• pp.330-337
• /
• 2021

3D 프린팅의 기술발전으로 대형물 제작이 가능하게 되면서 이를 건축물에 적용하기 위한 연구가 활발하게 진행되고 있다. 건축물에서는 구조재와 비구조재로 구분되고 비구조재는 비정형 구조물 및 내·외장패널에 적용하기 유리하다. 3D 프린팅 재료는 기본적으로 시멘트 모르타르의 압출과 적층이 가능해야하므로 시멘트 혼화용 폴리머 와 경량재료의 사용이 필수적이다. 본 연구는 3D 프린팅 적용을 위해 시멘트 모르타르에 EVA 재유화형 분말수지를 사용하였다. 경량재료 혼입 폴리머 시멘트 모르타르의 난연특성을 평가하기 위해 골재로는 규사8호와 경량재료로 경량골재, 중공글라스를 사용하여 난연 및 불연성능을 평가하였다. 연구결과, 규사8호 및 경량골재를 사용한 시험체가 충분한 난연 및 불연성능을 보였다. EVA 재유화형 분말수지를 혼입할 경우 5% 이하로 적용하여 사용하는 것이 유리하다.