• 대한전기학회논문지
• /
• 제33권5호
• /
• pp.173-180
• /
• 1984

The spectra of scattering light fromlaser-produced plasma near its fundamental and second harmonic wavelength were observed respectively by means of spectroscopic technique. The experimental results and the generation mechanism of nonlinear effects such as the second garmonics and the brillouin scattering were analysed theoretically. The spectra of reflected laser light became wider than that of incident laser light. And the peak of spectrum of reflected light shifted to red-side from that of incident light. The second harmonic light is generated from the nonlinear interaction of the incident laser light and the electron plasma wave excited in resonance region by the oblique incidence of laser light to the plasma. The Brillouin backscattering from laser-produced plasmas of hydrogen and deuterium has shown an isotope effect in the red-side region of the generated second harmonic light. This isotope shift is explained by the parametric instability at the cutoff (resonance) region using frequency-and phase-matching conditions of the waves.

• Journal of Microbiology and Biotechnology
• /
• 제18권1호
• /
• pp.118-123
• /
• 2008

A new method for antimicrobial susceptibility testing of vitro-cultured bacteria on an ordinary fluorescence spectrometer was developed. The viable bacteria reduced 3-(4,5 dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) to produce insoluble particles that displayed intense resonance scattering light. The assay showed a linear relationship between the number of viable bacteria and the intensity of resonance scattering light. Dead bacteria were unable to reduce MTT. Methicillin-resistant Staphylococcus aureus exposed to flavonoids from Marchantia convoluta showed a flavonoids concentration-dependent inhibition of the ability to reduce MTT. In the assay, less than 12 h was required to attain susceptibility results and fewer bacteria were utilized than in traditional methods. The RLS technique could, in combination with the MTT assay, be a rapid and sensitive measuring method to determine the in vitro activity of new antimicrobials.

• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.365-378
• /
• 2022

Complete blood cell count(CBC) is a technique that counts leukocytes for each type of blood cell being analyzed. The principle is that laser is incident to ex vivo flowing leukocytes in a microcapillary tube and scattered light occurs by laser and leukocytes. By collecting the scattered light, we can count the types of cells because different cells generate different light-scattering patterns. However, the technique has an intrinsic limitation, scattering pattern is shown in a wide range region in the resulting, which makes it difficult to accurate analyze and use fluorescent dyes. To overcome this limitation, a new design of CBC with a dual laser, which irradiates with orthogonal angles for collecting quad-scattering information was proposed. Before development, the scattering difference depending on wavelength must be investigated to only catch up to the scattered signal by angles. Some studies, which focused on simple particles, have been conducted to theoretically and experimentally investigate different scatterings by wavelength. In this study, we propose an optical system for measuring scattered light and investigate a complex particle. As a result, the green laser made strong scattering signals in both the forward and side direction: 10% and 30%, respectively.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.167-174
• /
• 1997

The penetration depth and the size distribution of the droplets of fuel sprays are important in the operation of spark-ignition MPI engines. A fluorescence/scattering image technique for droplet sizing was applied to measure th edroplet size distribution in non-evaporating gasoline sprays. The fluorescence and scattering lights were imaged simultaneously by the two-dimensional visualization system composed of a laser sheet, a doubling prism, optical filters, and a CCD camera. Quantitative droplet size distributions were extracted from evaluating the ratio of the two light densities. The mean droplet size measured by the fluorescence/scattering technique was compared with the result obtained by the enlarged photographs of droplets. The fluorescence/scattering image technique also gives the useful information of the characteristics of droplet impingement in a inclined wall.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.93-101
• /
• 2000

The characteristics of spray nozzle have been quantified with the measurement of fluorescence and Mie scattering images. To correct the attenuation of the incident light sheet, a sequential double-pass light sheet system and the geometrical averaging of two images was implemented. Quantitative mass flux distribution of spray was obtained from fluorescence image. 3-D image is reconstructed using 2-D radial images. Sauter mean diameter (SMD) distribution was determined using the ratio of fluorescence signal intensity and Mie scattering signal intensity and the values were quantified with PDP A data. The measurement of mass flux and SMD using planar imaging technique agee with PDP A data fairly well in the low density region. However, in dense region， there are significant errors caused by secondary scattering. It was found that the planar imaging technique provides many advantages over the point measurement technique, such as PDP A, and can be implemented for quantitative measurement, especially in low density region.

• 대한기계학회논문집B
• /
• 제23권9호
• /
• pp.1139-1150
• /
• 1999

The evolution of silica aggregate particles in coflow diffusion flames has been studied experimentally using light scattering and thermophoretic sampling techniques. The measurements of scattering cross section from $90^{\circ}$ light scattering have been utilized to calculate the aggregate number density and volume fraction using with combination of measuring the particle size and morphology through the localized sampling and a TEM image analysis. Aggregate or particle number densities and volume fractions were calculated using Rayleigh-Debye-Gans and Mie theory for fractal aggregates and spherical particles, respectively. Of particular interests are the effects of flame temperature on the evolution of silica aggregate particles. As the flow rate of $H_2$ increases, the primary particle diameters of silica aggregates have been first decreased, but, further increase of $H_2$ flow rate causes the diameter of primary particles to increase and for sufficiently larger flow rates, the fractal aggregates finally become spherical particles. The variation of primary particle size along the upward jet centerline and the effect of burner configuration have also been studied.

• 한국게임학회 논문지
• /
• 제7권2호
• /
• pp.21-32
• /
• 2007

물체 내부에서의 빛의 산란 현상 (subsurface scattering)에 기반한 조명 모델은 사실적인 이미지 생성에서 매우 중요하지만, 복잡한 계산으로 인하여 게임, 가상현실 등의 대화형 환경에 적용되기 어려웠다. 우리는 빛의 단일 산란과 다중 산란 현상에 의한 조명을 이미지 상에서 근사하는 보다 실용적인 기법을 제안한다. 먼저 광원 시점에서 렌더링한 이미지의 각 픽셀에 물체 내부로 투과된 조사도 정보를 저장하고, 쉐이딩 단계에서 이 정보를 사용하여 조명을 빠르게 계산한다. 단일 산란은 그림자 매핑과 유사한 알고리즘과 적응적인 결정적 샘플링을 통해 수행 비용을 효율적으로 줄인다. 다중 산란은 빛의 확산 이론에 기반한 계층적인 샘플링을 사용한다. 복잡한 함수의 테이블화은 속도를 보다 향상 시킨다. 실험을 통해 제안된 기법이 초당 수 십에서 수 백 프레임의 빠른 속도로 사실감있는 장면을 렌더링할 수 있으며, 게임과 같은 기존의 대화형 환경에 쉽게 적용될 수 있음을 보여준다.

• 대한기계학회논문집B
• /
• 제27권1호
• /
• pp.46-53
• /
• 2003

Effects of electric force on the morphology and growth of aggregates were studied experimentally. Nano-sized NaCl particles were supplied to a flame to perform the unipolar charging state. This electric precursor did not modify a temperature profile of the flame. The morphology of aggregates was measured by TEM image processing technique and the light scattering technique. In the unipolar charged state, the fractal dimension of aggregates was smaller than that of' the electrically neutral state. This result was in good agreement with our previous numerical simulations.

• 한국컴퓨터그래픽스학회논문지
• /
• 제16권1호
• /
• pp.9-20
• /
• 2010

3차원 공간에 존재하는 반투명 물질을 물리 기반으로 렌더링하기 위해서 빛의 진행 경로를 작은 구간으로 나눈 후, 각 구간에 대하여 빛의 직접적인 영향, 산란으로 인한 영향, 반투명 물질안에서의 소멸 및 물질의 발광으로 인한 영향 등을 고려한 빛의 에너지를 계산하여 누적하는 방식을 사용한다. 이중 빛의 산란은 연속 공간에서 매우 복잡한 방식으로 작용하기 때문에 이의 시뮬레이션을 위해서 상당한 노력이 필요하다. 빛의 산란을 효과적으로 계산하기 위해 여러근사 방법들이 고안되었는데, 그중 볼륨 포톤매핑 기법은 빛이 간섭매체 내부에서 산란되는 효과를 단순화된 시뮬레이션으로 미리 계산하여두고 이를 검색해 효율적으로 렌더링 하는 방법을 사용한다. 이 방법은 주변에서 검색한 시뮬레이션 정보를 이용하기 위해서 밀도추정방법을 적용하는데, 시뮬레이션자료의분포에 따라서 검색에 따른 편차가 있을 수 있게된다. 또한 시뮬레이션된 자료만을 이용하여 산란효과를 반영하기 때문에 고밀도이지만 시뮬레이션이 충분하지 못한 위치에 대해서 방향성 있는 위상함수에 대한 특징을 잘 표현하지 못한다는 문제가있다. 이러한 문제를해결하고자 하는 노력의 일환으로, 본 논문에서는 입자형태로 시뮬레이션된 볼륨데이터에 대해 밀도추정방법의 하나인 커널스무딩을 이용하여 표현한 산란효과를 반투명물질 자료구조에 저장하고 이를 복원하는 방법을 제안하고, 실험결과 분석을 통하여 장단점을 분석한다.

• Korea-Australia Rheology Journal
• /
• 제14권3호
• /
• pp.93-105
• /
• 2002

Experimental methods for making quantitative measurements of velocity fields in non-Newtonian fluids are reviewed. Techniques based on light scattering spectroscopy - laser Doppler velocimetry and homodyne light scattering spectroscopy, techniques based on imaging the displacement of markers - including particle image velocimetry and molecular tagging velocimetry, and techniques based on nuclear magnetic resonance imaging are discussed. The special advantages and disadvantages of each method are summarized, and their applications to non-Newtonian flows are briefly reviewed. Example data from each technique are also included.