• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.67-76
• /
• 2016

This study was conducted to examine the optimal environmental condition for promoting the growth of sowthistle as affected by light quality and photoperiod in a closed-type plant production system. Seeds were sown in 240-cell plug trays and then germinated for 3 days at a 24-hour photoperiod in a closed-type plant production system with LED lights (R:B:W = 8:1:1). Seedlings were transplanted and grown under 3 types of LED (R:B:W = 8:1:1, R:W = 3:7, or R:B = 8:2) and 4 photoperiods (24/0, 16/8, 8/16, or 4/20 hours) with $230{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ light intensity at a density of $20cm{\times}20 cm$. The experimental design was a randomized complete block design. Plants were cultured for 40 days un der the condition of $21{\pm}2^{\circ}C$ and $70{\pm}10%$ relative humidity after transplanting. Plants were fed with a recycling nutrient solution (pH 7.0 and EC $2.0dS{\cdot}m^{-1}$) contained in a deep floating tank. Fresh weight and dry weight of shoot or root, leaf length, and leaf area were the greatest in the photoperiod of 24/0 (light/dark) with RW LED. The highest number of leaves occurred in the photoperiod of 16/8 (light/dark) with RB LED, while the incidence of tip burn was higher in the photoperiod of 24/0 (light/dark) compared to the other treatments. Chlorophyll value was the highest in the 16/8 (light/dark) photoperiod and there was no significant difference by light quality. Chlorophyll fluorescence was the lowest in the photoperiod of 24/0 (light/dark) compared with other treatments. Therefore, in terms of economic feasibility and productivity for Ixeris dentata Nakai cultivation in a closed-type plant production system, the results obtained suggest that plants grew the best when kept in a photoperiod of 16/8 (light/dark) and light quality of combined LED RW (3:7).

• Journal of Bio-Environment Control
• /
• v.8 no.2
• /
• pp.108-114
• /
• 1999

This study was conducted to investigate the optimum environment for leaf lettuce (Lactuca sativa L. var. crispa) in a plant factory to increase mass-production efficiency of quality leaf lettuce. Transpiration rate and $CO_2$ assimilation rate were increased with increasing the photosynthetic photon flux density (PPFD). The highest fresh weight and dry weight were observed at the PPFD of 200 and 300 U moi $m^{-2}$ $s^{-l}$, respectively. The optimum aerial environment for the growth and quality of leaf lettuce in the plant factory was determined to be over 200 $\mu$mol $m^{-2}$ $s^{-1}$ for PPFB. Although the interaction between light intensity and nutrient level was not significant, the lettuce growth was the best under electrical conductivity (EC) of 1.8 mS $cm^{-1}$ / at high light intensity (250 $\mu$mol $m^{-2}$ $s^{-1}$ ) and EC of 2.4 mS cm-1 at low light level (150 $\mu$mol $m^{-2}$ $s^{-1}$ ) respectively.y.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.4
• /
• pp.319-329
• /
• 2015

The characteristics of aerosol light extinction were investigated by comparing measured and calculated extinction coefficient to understand the contribution of air pollutants on visibility impairment for data during 4 months (Jan~ April), 2014. The integrated nephelometer and aethalometer system were installed to measure the scattering and absorption coefficients of aerosol as well as BAM 1020, MARGA, semi-continuous OCEC analyzer, and online-XRF to calculate the extinction coefficient. The IMPROVE_2005 equation was used to determine the contributions of different chemical components on visibility impairment in $PM_{2.5}$ and $PM_{10}$ due to highest correlation with measured data. Sulfate, nitrate, and organic mass by carbon (OMC) of fine aerosol were the major contributors affecting on visibility impairment. Total contributions to light extinction were calculated as $631.0Mm^{-1}$ for the worst-case and $64.4Mm^{-1}$ for the best-case. The concentrations of aerosol component for the worst-case were 38.4 times and 45.5 times larger than those of the best-case for $(NH_4)_2SO_4$ and $NH_4NO_3$, respectively. At lower visibility condition, in which extinction coefficient was higher than $400Mm^{-1}$, extinction coefficient varied according to the relative humidity variation regardless of $PM_{2.5}$.

• The Korean Journal of Mycology
• /
• v.36 no.1
• /
• pp.31-35
• /
• 2008

To elucidate optimum light conditions for artificial cultivation of Grifola frondosa, the effects of light quality (blue, green, white) and light intensity (200, 500, 800, 1200 lux) on primordium formation, morphological properties and yield of fruiting bodies of G. frondosa using bag cultivation method were tested. Among three light sources, white light source ($400{\sim}620\;nm$) had a higher mushroom yield (242 g/bag) and a shorter cultivation period (52 days) than those of the others. In particular, blue light source ($400{\sim}560\;nm$) induced the morphology of wide and deep colored pilei in G. frondosa fruiting body. The experimental results on the appropriate light intensity indicated that 500 lux light was the most effective on mushroom production, whereas primordium formation was effective at 200 lux.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.2
• /
• pp.119-124
• /
• 2008

Storage conditions of selling mungbean sprouts should affect their marketability. The study was done to examine the effect of light quality (blue, green, yellow, red, far-red) on greening period, shape, fresh and dry weights of mungbean (cv. Zhong Lu 1) sprouts for 5 days to get some information on designing their various polyethylene envelops with different colors. Periods taking to green were 2 to 3.5 days in blue, red and far-red lights but longer than 6 days in green and yellow lights. Yellow lights had the longest total length adding hypocotyl and root, and blue light did the widest hypocotyl diameter while all light treatments showed similar lateral roots for the period. Total fresh and dry weights were the highest in red light but the least in far-red light. Their lengths and weights in green and yellow lights showing the longest periods for their greening declined with increased storage periods but showed no difference between them, meaning that the envelops should be designed mainly by green and yellow colors.

• Sleep Medicine and Psychophysiology
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2020

Mobile digital devices are very familiar and useful devices in the daily life of modern people, and are used for various tasks such as communication, reading, writing, and playing media. As the use of mobile digital devices has become more prevalent, user time has also been increasing. In particular, the number of people who use digital devices before sleep is growing. The light pollution associated with these devices is classified into four categories: urban sky glow, glare, light trespass, and clutter. The pattern in which modern people use digital devices corresponds to light pollution caused by light trespass and clutter from light exposure to artificial light at night. The light pollution caused by digital devices can cause melatonin secretion suppression, delayed sleep onset, reduction of sleepiness before bedtime, and periodic rhythm and cognitive function disturbances. In addition, a study of children and adolescents showed there may be disturbances in the sleep-wake cycle and circadian rhythm, deterioration of sleep quality, and daytime fatigue due to light pollution caused by artificial light at night from mobile digital devices. A multi-faceted research effort is also necessary to investigate the healthy use of mobile digital devices based on research evidence and insights with an accurate evaluation of the influence of mobile digital devices as a form of light pollution.

• Horticultural Science & Technology
• /
• v.29 no.3
• /
• pp.172-180
• /
• 2011

The net photosynthetic rate of 'Seolhyang' strawberry plants was measured daily for 7 days after treatment at three UV illumination dosages (0, 9.8, and 29.5 $kJ{\cdot}m^{-2}$). The net photosynthetic rates of the strawberry plants with 9.8 and 29.5 $kJ{\cdot}m^{-2}$ UV light illumination decreased by 20.2 and 61.4%, respectively, at 7 days after UV light treatments. UV treatments with two illumination dosages (7.9 and 15.7 $kJ{\cdot}m^{-2}$) altered the phenolic compounds contents during the cultivation period when compared to those in the control fruits. The anthocyanin content with 7.9 $kJ{\cdot}m^{-2}$ UV light illumination of 'Seolhyang' increased by 18.7% compared with those in control fruits at the 11 DAT. However, the anthocyanin content of 'Maehyang' was not significantly different among treatments during experiment period. The highest level of ellagic acid was found with 7.9 $kJ{\cdot}m^{-2}$ UV light illumination in both cultivars at the 11 DAT. Our results showed that strawberries illuminated with UV light during cultivation period had higher bioactive compounds contents than control fruits. These results suggest that UV light treatments may be a useful non-chemical way of promoting strawberry fruits quality.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.38-43
• /
• 2004

This paper describes the construction of a circular polariscope. Generally, a circular polariscope contains four optical elements and a light source. The first element following the light source is called the linear polarizer. It converts the ordinary light into plane-polarized light. The second element is a quarter wave plate which converts the plane-polarized light into circularly polarized light. Following the quarter wave plate, a specimen made of transparent photoelastic material is located in a loading device. The second quarter wave plate is set and the last element is the analyzer. These polarizing elements, two quarter wave plates and two linear polarizing filters, were purchased from the USA. Frames and other structures for holding polarizing filters were machined and assembled to be rotated. Light box, which includes four incandescent lamps and two sodium-vapor lamps, was made. In order to proof the function of the newly built polariscope, Tardy compensation test was applied to a rectangular shaped specimen made of poly-carbonate material (PSM 1). The error of the fringe constant, which was measured by the newly built polariscope, was within 4.4 percent compared to the standard value of this material. It is possible to make a good quality of polariscope if accurate polarizing filters will be used.

• Journal of Information Processing Systems
• /
• v.18 no.4
• /
• pp.575-586
• /
• 2022

Uneven light in real-world causes visual degradation for underexposed regions. For these regions, insufficient consideration during enhancement procedure will result in over-/under-exposure, loss of details and color distortion. Confronting such challenges, an unsupervised low-light image enhancement network is proposed in this paper based on the guidance of the unpaired low-/normal-light images. The key components in our network include super-resolution module (SRM), a GAN-based low-light image enhancement network (LLIEN), and denoising-scaling module (DSM). The SRM improves the resolution of the low-light input images before illumination enhancement. Such design philosophy improves the effectiveness of texture details preservation by operating in high-resolution space. Subsequently, local lightness attention module in LLIEN effectively distinguishes unevenly illuminated areas and puts emphasis on low-light areas, ensuring the spatial consistency of illumination for locally underexposed images. Then, multiple discriminators, i.e., global discriminator, local region discriminator, and color discriminator performs assessment from different perspectives to avoid over-/under-exposure and color distortion, which guides the network to generate images that in line with human aesthetic perception. Finally, the DSM performs noise removal and obtains high-quality enhanced images. Both qualitative and quantitative experiments demonstrate that our approach achieves favorable results, which indicates its superior capacity on illumination and texture details restoration.

• Journal of Information Processing Systems
• /
• v.19 no.4
• /
• pp.483-497
• /
• 2023

Depth estimation is one of the most complicated and difficult problems to deal with in the light field. In this paper, a compound attention convolutional neural network (CAttNet) is proposed to extract depth maps from light field images. To make more effective use of the sub-aperture images (SAIs) of light field and reduce the redundancy in SAIs, we use a compound attention mechanism to weigh the channel and space of the feature map after extracting the primary features, so it can more efficiently select the required view and the important area within the view. We modified various layers of feature extraction to make it more efficient and useful to extract features without adding parameters. By exploring the characteristics of light field, we increased the network depth and optimized the network structure to reduce the adverse impact of this change. CAttNet can efficiently utilize different SAIs correlations and features to generate a high-quality light field depth map. The experimental results show that CAttNet has advantages in both accuracy and time.