• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.1
• /
• pp.71-87
• /
• 1995

The purpose of this study was to investigate the early irradiation changes on the ultrastructure of the capillary endothelial cell in the rat submandibular glands. For the study, 110 Sprague-Dawley strain male rats were singly irradiated to their neck regions with the doses of 2Gy, 5Gy, and 10Gy by 6MV X -irradiation, and sacrificed on the 3 hours, 6 hours, 12 hours, 1 day, 3 days, 7 days, and 14 days after irradiation. The authors observed the histologic and ultrastructural changes of the capillary endothelial cell using the light and electron microscopes. The results were as follows: I. In the light microscopic examination, the capillary dilation was observed on the 6 hours group and the capillary density was slightly increased on the 12 hours group after 2Gy and 5Gy irradiation. And luminal size and capillary density were decreased on the 3 days and the 7 days groups after irradiation, after then, they were recovered. But capillary density was still decreased on the 14 days group after 10Gy irradiation. 2. In the transmission electron microscopic examination, the mild proliferation of cytoplasmic process of the endothelial cell and reduction in luminal size were observed on the 3 hours group after irradiation. After then, endothelial swelling, marked proliferation of cytoplasmic process, thickened basal lamina, and numerous pinocytotic vesicles were observed after the 1 day group after irradiation. Thickened basal lamina and numerous pinocytotic vesicles were still observed until the 7 days group after irradiation. These changes were recovered to normal on the 14 days group after 2Gy and 5Gy irradiation, but not after 10Gy irradiation. 3. In the scanning electron microscopic examination, the dilation of conduits and constriction, and meandering were observed on the 1 day group after 10Gy irradiation. These changes were observed with increased coarseness of the surface of the vascular resin casting on the 3 days group after irradiation. 4. From the above results, endothelial swelling, proliferation of cytoplasmic process, and thickening of the basal lamina appeared before the 6 hours group after irradiation. And these changes may also induce the increase of the capillary number and luminal size, after then, capillary permeability was increased via the increase of the number of pinocytotic vesicles. The changes were observed earlier and more apparent with the increase of the irradiation doses under the dose of 10Gy irradiation.

• Korean Journal of Materials Research
• /
• v.19 no.10
• /
• pp.555-561
• /
• 2009

Expanded graphite (EG) is synthesized by chemical intercalation of natural graphite (NG) and rapid expansion at high temperature, with titanium n-butoxide (TNB) used as titanium source by a sol-gel method to prepare EG-TiO$_2$ composite. The performances of the prepared EG-TiO$_2$ composite are characterized by BET surface area measurement, scanning electron microscopy (SEM), X-ray diffraction patterns (XRD) and energy dispersive X-ray analysis (EDX). To compare the photocatalytic activities of the EG-TiO$_2$ composite, three kinds of dye solutions, methylene blue (MB), methylene orange (MO) and rhodamine B (RhB), and two kinds of light source, UV light and visible light (VL), are used. Comparing the results, it can be clearly seen that the degradation of all of the dye solutions under irradiation by UV light is much better than that under irradiation by visible light, and the decomposition of MB solution was better than that of both of MO and RhB solution.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.241-241
• /
• 2010

Recently high and persistent spontaneous buildup of a surface potential (SP) upon vacuum deposition of tris (8-hydroxyquinolinato) aluminum (III) ($Alq_3$), which is widely used for organic light emitting devices. The removal of the giant surface potential by visible light irradiation has also been reported. In this study, we coated $Alq_3$ on the FTO substrate and raise the capacity for absorbing sun light. The $Alq_3$ which is green light emitting diode emits light at wavelengths between 500 and 550nm. If we apply one's FTO/$Alq_3$ substrate in one's DSSC, we could get higher energy conversion efficiency because the N719 dye that we used for fabricating the DSSC emits light just at near 540nm. The energy conversion efficiency of approximately 4.8 % at the condition of irradiation of AM 1.5 (100 mW/$cm^2$) simulated sunlight, and the $J_{sc}$ is 12.0 mA/$cm^2$, $V_{oc}$ is 0.71 V, FF is 0.56, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.41-44
• /
• 1999

Displacement current was generated in the pressure stimulus and light stimulus. Solution of azobenzene molecules (8A5H) have to character trans-to-cis. Pressure stimulus generate in the pressure and current. light stimulus generate in the displasement current. The Maxwell displacement current measuring technique has been applied for the investigation of azobenzene organic thin films under alternating photoirradiation with ultraviolet(360nm) and visible (450nm) light. The displacement current was generated due to the trans-to-cis photoisomerization by irradiation with ultraviolet light(λ$_1$=360 nm) Whereas the displacement current was generated in the opposite direction due to the cis-to-trans photoisomerization by irradiation with visible light(λ$_2$=450nm). As result, To show twice reaction certainly phase transition in pressure. A first range generated from 24$\AA$$^2$ to 29$\AA$$^2$and second range generated from 20$\AA$$^2$to 24$\AA$$^2$. Also, cetainfy stimulus apper low pressure and high pressure in photoirradiation. To see different every moment phase transition.

• Korean Journal of Materials Research
• /
• v.22 no.2
• /
• pp.91-96
• /
• 2012

AC and ZnS modified $TiO_2$ composites (AC/ZnS/$TiO_2$) were prepared using a sol-gel method. The composite obtained was characterized by Brunauer-Emmett-Teller (BET) surface area measurements, X-ray diffraction (XRD), energy dispersive X-ray (EDX) analysis, scanning electron microscope (SEM) analysis, and according to the UV-vis absorption spectra (UV-vis). XRD patterns of the composites showed that the AC/ZnS/$TiO_2$ composites contain a typical single and clear anatase phase. The surface properties as observed by SEM present the characterization of the texture of the AC/ZnS/$TiO_2$ composites, showing a homogenous composition in the particles showing the micro-surface structures and morphology of the composites. The EDX spectra of the elemental identification showed the presence of C and Ti with Zn and S peaks for the AC/ZnS/$TiO_2$ composite. UV-vis patterns of the composites showed that these composites had greater photocatalytic activity under visible light irradiation. A rhodamine B (Rh.B) solution under visible light irradiation was used to determine the photocatalytic activity. The degradation of Rh.B was determined using UV/Vis spectrophotometry. An increase in the photocatalytic activity was observed. From the photocatalytic results, the excellent activity of the Y-fullerene/$TiO_2$ composites for the degradation of methylene blue under visible irradiation could be attributed to an increase in the photo-absorption effect caused by the ZnS and to the cooperative effect of the AC.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.164-164
• /
• 2013

Among multicomponent nanostructures, hybrid nanocatalysts consisting of metal nanoparticle-semiconductor junctions offer an interesting platform to study the role of metal-oxide interfaces and hot electron flows in heterogeneous catalysis. In this study, we report that hot carriers generated upon photon absorption significantly impact the catalytic activity of CO oxidation. We found that Pt-CdSe-Pt nanodumbbells exhibited a higher turnover frequency by a factor of two during irradiation by light with energy higher than the bandgap of CdSe, while the turnover rate on bare Pt nanoparticles didn't depend on light irradiation. We also found that Pt nanoparticles deposited on a GaN substrate under light irradiation exhibit changes in catalytic activity of CO oxidation that depends on the type of doping of the GaN. We suppose that hot electrons are generated upon the absorption of photons by the semiconducting nanorods or substrates, whereafter the hot electrons are injected into the Pt nanoparticles, resulting in the change in catalytic activity. We discuss the possible mechanism for how hot carrier flows generated during light irradiation affect the catalytic activity of CO oxidation.

• Food Science and Preservation
• /
• v.24 no.3
• /
• pp.381-386
• /
• 2017

Ergocalciferol is known as having vitamin D activity. In this study, the effects of UV irradiation on the increase of egocalciferol content were investigated in 7 kinds of mushrooms, i.e, lily mushroom (Flammulina velutipes), oyster mushroom (Pleurotus ostreatus), young oyster mushroom (Pleurotus ostreatus), king oyster mushroom (Pleurotus eryngii), button mushroom (Agaricus bisporus), shiitake (Lentinula edodes), and wood ear mushroom (Auricularia auricula-judae). Mushrooms which were not exposed to UV light contained negligible amount of ergocalciferol in all kinds of tested mushrooms, but UV irradiation increased their content of ergocalciferol. Of UV A, B and C, UV B light was the most effective to increase ergocalciferol contents. In mushrooms, the increase in ergocalciferol content occurred only in the peel within 1 mm depth from the surface, which was directly exposed to the UV light. Therefore, when fresh whole mushrooms were irradiated with UV light, lily mushroom, the mushroom with a larger surface area compared to volume, such as lily mushroom, was more favorable in producing ergocalciferol. On the other hand when the mushrooms were freeze-dried and cut, the mushrooms with a higher ergosterol, such as king oyster mushroom, shiitake or button mushroom, were more favorable in generating ergocalciferol.

• Korean Journal of Food Science and Technology
• /
• v.52 no.5
• /
• pp.538-545
• /
• 2020

Kimchi is a widely consumed traditional Korean food, and its probiotic properties have received great attention. In this study, changes in the quality characteristics of fermentation broths obtained from two types of Chinese cabbage kimchi (red with red pepper and white without red pepper) were assessed after the administration of blue light emitting diode (BLED) irradiation at 4℃; characteristics assessed included acidity, chromaticity, antioxidant activity, and growth modulation of isolated microorganisms. The pH of the white kimchi (WK) broth decreased with time; the decrease was delayed significantly under BLED irradiation (p<0.05). BLED irradiation decreased the L (lightness) and b (yellowness) values and increased a (redness) in WK, whereas the a and b values of the red kimchi (RK) broth increased with BLED irradiation. Growth stimulation of lactic acid bacteria by BLED irradiation was observed in both WK and RK. The numbers of yeast and mold were also increased in RK (p<0.05), but not in WK. There was no change observed in the scavenging activities against ABTS (2,2'-azido-bis(3-ethylbenzthiazoline-6-sulfonic acid) radicals in both kimchi broths after BLED treatment. The results of this study indicated that BLED irradiation could modulate the fermentation process and the quality characteristics of kimchi during storage.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.76-92
• /
• 1998

The purpose of this study was to evaluate the possible efficacy of Nd-YAG laser as a dentin conditioner by observing the laser irradiation dentin surface under scanning electron micrograph and measuring shear bond strength of restored light-cured glass ionomer mold. Fifty intact premolars were prepared for shear bond strength tests. The teeth were randomly divided into five groups as follows; Group I. no treatment Group II. 10% poly acrylic acid, 20 sec Group III. laser treatment 2 w, 20 Hz, 2 sec Group IV. laser treatment 2 w, 20 Hz, 5 sec Group V. laser treatment 2 w, 20 Hz, 10 sec Samples of each group were restored with light-cured glass ionomer cement after dentin conditioning and then measuring the shear bond strength of each specimen were measured using universal testing machine. Additional ten premolars were prepared for SEM analysis The result from the this study can be summarized as follows. 1. Shear bond strength of polyacrylic acid-treated group (II) was significantly higher than other groups (p<0.05). 2. No statistically significant difference could be found between three laser-treated groups (III, IV, V) in shear bond strength(p>0.05) 3. According to the result of observation under SEM, Polyacrylic acid was shown to have removed the smear layer effectively and opened the dentinal tubules, whereas the laser has produced the irregular surface mainly composed of melted and fused structure. The microcracks found in laser-treated groups increased in number with irradiation time and formed the regular mesh-type in 10 sec-irradiation group. 4. The ultrastructural change of dentin surface created by laser irradiation was found to the improper for bonding of the glass ionomer restorative materials. And the lower shear bond strength of laser irradiated group might have been due to the failure to form the suit able dentin surface for the glass ionomer to penetrated into and form the proper micromechanical retention.

• Korean journal of applied entomology
• /
• v.4
• /
• pp.19-24
• /
• 1965

In an attempt to find a satisfactory environmental factors which facilitate abundant conidial production of Piriculariaoryzae Cav. on tomato juice media, various environmental factors were studied for their effect on sporulation and mycelial growth of the fungus. Those factors were conditions of irradiation, color of light, age of culture and pH of the media. l) Continuous exposure to fluorescent light (Mitsubish FL-20-35 W) produced more conidia and much mycelial growth than did intermittent photoperiods and darkness. 2) Of 3 cellophane filters and direct exposure to fluorescent light used, conidia were produced best under the direct exposure to the light. Conidial production in color filter conditions sequently decreased with red, yellow and blue. Growth of mycelium was not significantly different within colors. 3) Periodic irradiation of 12-hour unit brought about zones on mycelial growth no matter what the color filter was used. 4) Older cultures responding to the light were more stimulated by light than were the younger one in the conidia production, but maximum production of conidia was 48 hours of age in this case. 5) Color of the mycelial mat and the aerial mycelium seemed to have a close relation to the production of conidia. The more darkness of the mycelial mat was produced the more conidia and the much aerial mycelium was produced the least conidia. The color of mycelium was more dark under the continuous irradiation than continuous darkness, while the periodic irradiation showed intermediate effect. 6) The concentration of hydrogen ion for growth and sporulation of the fungus was investigated the ranges between 5 and 9. The best pH for the fungus was also noted at 7. whereas the below of pH 4 was not occurred any mycelial growth and sporulation.