• 한국진공학회지
• /
• 제6권4호
• /
• pp.321-325
• /
• 1997

LCD용 칼라 필터를 제작하는 방법으로 감광성 고분자(photosensitive polymer)에 광 리소그라피(photolithography)기술이 많이 이용되어지고 있다. 이로 인해 감광성 고분자 표 면의 물리적, 화학적 성질이 변하게 되는데, 이는 후속 공정인 플라즈마 식각이나 ITO 전극 의 증착 등에도 많은 영향을 주므로, 각 공정에 따른 이들 고분자의 표면 연구는 매우 중요 하다. 본 논문에서는 blue 칼라 필터의 고분자 표면에 대한 연구를 SIMS와 XPS를 이용하 여 수행하였으며, 표면의 거칠기 변화를 AFM을 통해 관찰하였다. SIMS와 XPS결과로부터 초기 공정인 blue 칼라 필터를 스핀 코팅하고 pre bake한 상태에서는 주로 칼라 필터의 주 성분인 단량체와 결합제의 고분자 물질이 표면에 드러나 있다가, 노광 과정을 거치고 post bake한 시료에서는 색깔을 내는 안료 성분이 표면에 드러남을 확인하였고, AFM을 통해서 는 post bake후에 표면에 더 거칠어 짐을 관찰하였다.

• 재활복지공학회논문지
• /
• 제5권1호
• /
• pp.103-110
• /
• 2011

본 논문에서는 지능형 휠체어를 위한 시선 인식 인터페이스에 대해 제안한다. 시선 인식 인터페이스는 조이스틱을 움직이기 힘든 중증 장애인을 위해 시선 인식 및 추적을 이용하여 전동휠체어를 움직일 수 있게 하는 사용자 인터페이스이다. 지능형 휠체어는 시선인식 및 추적 모듈, 사용자 인터페이스, 장애물 회피 모듈, 모터 제어 모듈, 초음파 센서 모듈로 구성된다. 시선인식 및 추적 모듈은 적외선 카메라와 두개의 광원으로 사용자 눈의 각막 표면에 두 개의 반사점을 생성하고, 중심점을 구한 뒤, 동공의 중심점과 두 반사점의 중심을 이용하여 시선을 인식하고 추적 한다. 제안된 방법의 시선 인식 인터페이스는 실험을 통해 시선을 이용하여 지능형 휠체어에 명령을 하달하고 지능형 휠체어가 임의로 설치된 장애물을 감지하고 정확하게 장애물을 회피 할 수 있음을 보였다.

• 한국물환경학회지
• /
• 제25권1호
• /
• pp.90-95
• /
• 2009

This study investigates the oxidative degradation of N-nitrosodimethylamine (NDMA), a probable human carcinogen, by advanced oxidation process (i.e., UV process). The experiments were performed with various pH, initial concentration, UV intensity, and addition of $H_2O_2$ or $TiO_2$ on UV process. The results showed that the direct UV photolysis was the most effective treatment method. The lower pH, intial concentration and higher intensity of UV stimulated higher NDMA removal. However, addition of oxidant ($H_2O_2$, $TiO_2$) slows down photochemical treatment of NDMA since the oxidant can filter out the UV light and block it to reach the NDMA molecules. Dimethylamine (DMA) and nitrite were found to be a major byproduct from NDMA oxidation. To evaluate the chronic toxicity effects of UV-treated NDMA on the growth of microalgae, "Skeletonema costatum", was studied as long term experiments. Results demonstrated that after the 13 days exposure the chronic toxicity was decreased about 15% with application of UV process on NDMA degradation.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.731-734
• /
• 2013

Reduced tungsten bronze nanoparticles of ternary and quaternary compounds were prepared by adding sodium and cesium to crystal structures of tungsten trioxides ($Na_xCs_{0.33-x}WO_3$, x = 0, 0.11) while maintaining the overall alkali metal fraction at 0.33, in an attempt to control near infrared (NIR) shielding property in the particular wavelength range of 780 to 1200 nm. The structure and composition analysis of the quaternary compound, $Na_{0.11}Cs_{0.22}WO_3$, revealed that 93.1% of the hexagonal phase was formed, suggesting that both alkali metals were mainly inserted in hexagonal channel. The NIR shielding property for $Na_{0.11}Cs_{0.22}WO_3$ was remarkable, as this material demonstrated efficient transmittance of visible light up to 780 nm and enhancement in NIR shielding because of the blue-shifted absorption maximum in comparison to $Cs_{0.33}WO_3$.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.955-963
• /
• 2008

In this paper, we propose an improved practical encryption and fault-tolerance decryption method using a non-negative value key and random function obtained with a white noise by using iterative phase wrapping method. A phase wrapping operating key, which is generated by the product of arbitrary random phase images and an original phase image. is zero-padded and Fourier transformed. Fourier operating key is then obtained by taking the real-valued data from this Fourier transformed image. Also the random phase wrapping operating key is made from these arbitrary random phase images and the same iterative phase wrapping method. We obtain a Fourier random operating key through the same method in the encryption process. For practical transmission of encryption and decryption keys via Internet, these keys should be intensity maps with non-negative values. The encryption key and the decryption key to meet this requirement are generated by the addition of the absolute of its minimum value to each of Fourier keys, respectively. The decryption based on 2-f setup with spatial filter is simply performed by the inverse Fourier transform of the multiplication between the encryption key and the decryption key and also can be used as a current spatial light modulator technology by phase encoding of the non-negative values. Computer simulations show the validity of the encryption method and the robust decryption system in the proposed technique.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.179-185
• /
• 2001

In this study, a visual sensor system for weld seam tracking the I-butt weld joints in GMA welding was constructed. The sensor system consists of a CCD camera, a diode laser with a cylindrical lens and a band-pass-filter to overcome the degrading of image due to spatters and arc light. In order to obtain the enhanced image, quantitative relationship between laser intensity and iris number was investigated. Throughout the repeated experiments, the shutter speed was set at 1-milisecond for minimizing the effect of spatters on the image, and therefore most of the spatter trace in the image have been found to be reduced. Region of interest was defined from the entire image and gray level of searched laser line was compared to that of weld line. The differences between these gray levels lead to spot the position of weld joint using central difference method. The results showed that, as long as weld line was within $^\pm$15$^\circ$from the longitudinal straight fine, the system constructed in this study could track the weld line successful1y. Since the processing time reduced to 0.05 sec, it is expected that the developed method could be adopted to high speed welding such as laser welding.

• 한국의학물리학회지:의학물리
• /
• 제6권1호
• /
• pp.65-77
• /
• 1995

A new gamma camera using a-Si : H photodetectors has been designed for the imaging of heart and other small organs. In this new design the photomultiplier tubes and the position sensing circuitry are replaced by 2-D array of a-Si : H p-i-n pixel photode tectors and readout circuitry which are built on a substrate. Without the photomultiplier tubes this camera is light weight, hence can be made portable. To predict the characteristics and the performance of this new gamma camera we did Monte Carlo simulations. In the simulations 128${\times}$128 imaging array of various pixel sixes were used. $\^$99m/Tc(140keV)and $\^$201/Tl(70keV) were used as radiation sources. From the simulations we could obtain the resolution of the camera and ther overall system, and the blurring effects due to scattering in the phantom. Using the Wiener filter for image processing, restoration of the blurred image could be achieved. Simulation results of a-Si : H based gamma camera were compared with those of a conwentional gamma camera.

• 약학회지
• /
• 제30권6호
• /
• pp.311-316
• /
• 1986

A new UV labeling reagent was developed and used in HPLC for the determination of prostaglandin $E_2$ which have weak UV light-absorbing property. This reagent, 2-bromoacetyltriphenylene, was synthesized by the bromination of 2-acetyltriphenylene which was obtained from triphenylene by Friedel-Crafts reaction. The wave length maximum (${\lambda}_{max}^{CH_3CN}$ of this reagent was 268nm. Prostaglandin E$_2$ was extracted from prostaglandin E$_2$-$\beta$-cyclodextrin using a Sep-pak $C_{18}$ cartridge. The prostaglandin E$_2$ was labeled with 2-bromoacetyl-triphenylene in aectonitrite using 18-crown-6-ether as catalyst. Derivatized prostaglandins were separated on a reversed-phase column (Radial-pak) $\mu$-Bondapak $C_{18}$ using acetonitrile: water=60:40 as mobile phase. The effluent was monitored by UV detector at 254nm filter kit. Linearity of calibration curve was obtained between 30ng and 140ng, and the lower limit of detection was 5ng.

• Journal of Mechanical Science and Technology
• /
• 제19권10호
• /
• pp.1856-1863
• /
• 2005

In this study, a visual sensor system for weld seam tracking the I-butt weld joints in GMA welding was constructed. The sensor system consists of a CCD camera, a diode laser with a cylindrical lens and a band-pass-filter to overcome the degrading of image due to spatters and arc light. In order to obtain the enhanced image, quantitative relationship between laser intensity and iris opening was investigated. Throughout the repeated experiments, the shutter speed was set at 1/1000 second for minimizing the effect of spatters on the image, and therefore the image without the spatter traces could be obtained. Region of interest was defined from the entire image and gray level of the searched laser stripe was compared to that of weld line. The differences between these gray levels lead to spot the position of weld joint using central difference method. The results showed that, as long as weld line is within $\pm15^{o}$ from the longitudinal straight line, the system constructed in this study could track the weld line successfully. Since the processing time is no longer than 0.05 sec, it is expected that the developed method could be adopted to high speed welding such as laser welding.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.799-802
• /
• 2009

We have been studying the next generation of video creation solution based on TVML (TV program Making Language) technology. TVML is a well-known scripting language for computer animation and a TVML Player interprets the script to create video content using real-time 3DCG and synthesized voices. TVML has a long history proposed back in 1996 by NHK, however, the only available Player has been the one made by NHK for years. We have developed a new TVML Player from scratch and named it T2V (Text-To-Vision) Player. Due to the development from scratch, the code is compact, light and fast, and extendable and portable. Moreover, the new T2V Player performs not only a playback of TVML script but also a Text-To-Vision conversion from input written in XML format or just a mere plane text to videos by using 'Text-filter' that can be added as a plug-in of the Player. We plan to make it public as freeware from early 2009 in order to stimulate User-Generated-Content and a various kinds of services running on the Internet and media industry. We think that our T2V Player would be a key technology for upcoming new movement.