• 한국컴퓨터정보학회논문지
• /
• 제24권5호
• /
• pp.49-58
• /
• 2019

In this paper, we propose an edge cloud platform architecture for implementing smart factory. The edge cloud platform is one of edge computing architecture which is mainly focusing on the efficient computing between IoT devices and central cloud. So far, edge computing has put emphasis on reducing latency, bandwidth and computing cost in areas like smart homes and self-driving cars. On the other hand, in this paper, we suggest not only common functional architecture of edge system but also light weight cloud based architecture to apply to the specialized requirements of smart factory. Cloud based edge architecture has many advantages in terms of scalability and reliability of resources and operation of various independent edge functions compare to typical edge system architecture. To make sure the availability of edge cloud platform in smart factory, we also analyze requirements of smart factory edge. We redefine requirements from a 4M1E(man, machine, material, method, element) perspective which are essentially needed to be digitalized and intelligent for physical operation of smart factory. Based on these requirements, we suggest layered(IoT Gateway, Edge Cloud, Central Cloud) application and data architecture. we also propose edge cloud platform architecture using lightweight container virtualization technology. Finally, we validate its implementation effects with case study. we apply proposed edge cloud architecture to the real manufacturing process and compare to existing equipment engineering system. As a result, we prove that the response performance of the proposed approach was improved by 84 to 92% better than existing method.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.47-51
• /
• 2022

With the innovative development of bio, pharmaceutical, and semiconductor technologies, it is essential to demand a next-generation transfer system that minimizes dust and vibrations generated during the manufacturing process. In order to develop dust-free and non-contact transfer systems, the high temperature superconductor (HTS) bulks have been applied as a magnet for levitation. However, sintered HTS bulk magnets are limited in their applications due to their relatively low critical current density (J_c) of several kA/cm² and low mechanical properties as a ceramic material. In addition, during cooling to cryogenic temperatures repeatedly, cracks and damage may occur by thermal shock. On the other hand, the bulk magnets made by stacked HTS tapes have various advantages, such as relatively high mechanical properties by alternate stacking of the metal and ceramic layer, high magnetic levitation performance by using coated conductors with high J_c of several MA/cm², consistent superconducting properties, miniaturization, light-weight, etc. In this study, we tried to fabricate HTS tapes stacked bulk magnets with 60 mm × 60 mm area and various numbers of HTS tape stacked layers for magnetic levitation. In order to examine the levitation forces of bulk magnets stacked with HTS tapes from 1 to 16 layers, specialized force measurement apparatus was made and adapted to measure the levitation force. By increasing the number of HTS tapes stacked layers, the levitation force of bulk magnet become larger. 16 HTS tapes stacked bulk magnets show promising levitation force of about 23.5 N, 6.538 kPa at 10 mm of levitated distance from NdFeB permanent magnet.

• 대한토목학회논문집
• /
• 제26권3A호
• /
• pp.457-464
• /
• 2006

화이버로 보강된 복합재료는 비강성과 강도가 높을 뿐만 아니라 경량화를 위한 작업이 가능한 재료로써, 항공, 선박 그리고 토목분야와 같은 많은 산업분야에서 계속적으로 사용이 증대되고 있다. 본 연구는 전단변형을 고려한 타원단면을 갖는 복합적 층 구조물의 좌굴하중 및 모드형상을 분석하였다. 좌굴해석을 수행하기 위해, 면내회전자유도를 갖는 평면응력 요소와 휨 요소를 결합하여 무결점 4절점 쉘요소를 작성하였다. 이때 추가변형률과 대체전단변형률을 도입함으로써 요소의 거동을 개선하였다. 해석모델에 대해 쉘의 기하학적 형상, 종횡비, 화이버 보강각도, 그리고 적층배열에 따른 영향을 고찰하였다. 본 연구에서 제시한 타원단면을 갖는 적층관의 임계좌굴하중과 모드형상은 여러 가지 설계변수에 의한 거동에 대한 정확한 이해로부터 효율적인 설계방향을 제시하고자 하였으며, 추후 적층관의 좌굴해석시 좋은 참고자료로 활용할 수 있으리라 기대된다.

• Steel and Composite Structures
• /
• 제49권4호
• /
• pp.441-456
• /
• 2023

Aiming at the development trend of light weight and high strength of engineering structures, this paper experimentally investigated the seismic performance of circular-in-square high-strength concrete-filled double skin steel tubular (HCFDST) stub columns with out-of-code width-to-thickness (B/t) ratios. Typical failure mode of HCFDST stub columns appeared with the infill material crushing, steel fracture and local buckling of outer tubes as well as the inner buckling of inner tubes. Subsequently, the detailed analysis on hysteretic curves, skeleton curves and ductility, energy dissipation, stiffness degradation and lateral force reduction was conducted to reflect the influences of hollow ratios, axial compression ratios and infill types, e.g., increasing hollow ratio from 0.54 to 0.68 and 0.82 made a slight effect on bearing capacity compared to the ductility coefficients; the higher axial compression ratio (e.g., 0.3 versus 0.1) significantly reduced the average bearing capacity and ductility; the HCFDST column SCFST-6 filled with concrete obviously displayed the larger initial secant stiffness with a percentage 34.20% than the column SCFST-2 using engineered cementitious composite (ECC); increasing hollow ratios, axial compression ratios could accelerate the drop speed of stiffness degradation. The out-of-code HCFDST stub columns with reasonable design could behave favorable hysteretic performance. A theoretical model considering the tensile strength effect of ECC was thereafter established and verified to predict the moment-resisting capacity of HCFDST columns using ECC. The reported research on circular-in-square HCFDST stub columns can provide significant references to the structural application and design.

• 한국유기농업학회지
• /
• 제23권3호
• /
• pp.549-565
• /
• 2015

LEDs 광원 및 광도에 따른 베이비채소 6작물의 생육 특성과 기능성물질 함량을 구명하고자 Fluorescent lamp (100, 125, $150{\mu}mol\;m^{-2}s^{-1}$), Red+Blue 1:1 (100, 125, $150{\mu}mol\;m^{-2}s^{-1}$), Red+Blue 2:1 (100, 125, $150{\mu}mol\;m^{-2}s^{-1}$), Red+Blue 4:1 (100, 125, $150{\mu}mol\;m^{-2}s^{-1}$) 광원하에서 파종 40일 후에 수확하여 조사한 결과는 다음과 같다. 1. 베이비채소의 엽수는 시금치를 제외한 비트, 치커리, 적상추, 쑥갓, 겨자에서 Red+Blue(4:1) $150{\mu}mol\;m^{-2}s^{-1}$ 처리에서 가장 많았다. 2. 초장은 비트를 제외한 치커리, 시금치, 적상추, 쑥갓, 겨자에서 Red+Blue(4:1) $150{\mu}mol\;m^{-2}s^{-1}$ 처리에서 가장 높았다. 3. 생체중과 건물중은 비트, 치커리, 시금치, 적상추, 쑥갓, 겨자에서 Red+Blue(4:1) $150{\mu}mol\;m^{-2}s^{-1}$ 처리에서 가장 높았다. 4. 엽록소 a, 엽록소 b 함량은 시금치, 적상추, 겨자가 대조구인 Fluorescent lamp $150{\mu}mol\;m^{-2}s^{-1}$에서 가장 높았다. 5. 총 안토시아닌과 총 폴리페놀 함량은 비트, 치커리, 시금치, 적상추, 쑥갓, 겨자에서 Red+Blue(4:1) $150{\mu}mol\;m^{-2}s^{-1}$ 처리에서 가장 높았다. 6. Free radical 소거능은 비트, 치커리, 시금치, 적상추, 쑥갓, 겨자의 $150{\mu}mol\;m^{-2}s^{-1}$에서 높았지만 LEDs 광원별로는 차이를 보이지 않았다. 이상의 결과를 종합해 볼 때 비트, 치커리, 시금치, 적상추, 쑥갓, 겨자의 베이비 채소를 Red+Blue (4:1) $150{\mu}mol\;m^{-2}s^{-1}$에서 재배한다면 더욱 좋은 생육 효과를 기대할 수 있고 기능성 물질 함량도 다른 광도와 비교하여 상대적으로 좋았으므로 추후 상기의 베이비채소 생산 시 유용한 기초자료가 될 것으로 생각된다.

• 한국해양환경ㆍ에너지학회지
• /
• 제9권2호
• /
• pp.98-108
• /
• 2006

지금까지 우리나라에서 수행된 소형 다동체 레저낚시어선의 선형개발 현황을 살펴보면 배의 길이 LOA 15 m, LBP 12 m, 총톤수 9.77톤, 경하배수량 15.1톤인 쌍동선은 이미 선형개발이 완료되어 건조후 운항 중에 있는데, 이는 선박검사기술협회의 주관으로 충남대학교, 인하대학교, 서울대학교와 조선소인 (주)어드밴스드마린테크가 공동참여하여 낚시전용어선으로 선형개발한 것으로서 선체의 재질은 FRP(Fiber Reinforced Plastics)이고, 주기관은 디젤엔진 $360ps{\times}2800rpm{\times}2sets$(시제선은 $283ps{\times}2600rpm{\times}2sets$ 장착)에 워터제트(Water Jet) 추진시스템을 채용하였다. 이러한 사항을 바탕으로. 이 논문에서는 배의 길이 LOA 17 m, LBP 14m(Side Hull 6 m), 총톤수 9.77톤, 경하배수량 11.2톤인 삼동선형의 개발을 목표로 추진되었던 인하대학교 황해권 수송시스템 연구센터(CTYS)사업과 관련하여 소형 다동체 레저어선의 선형설계에 관하여 기술하고자 한다.

• 한국자원식물학회지
• /
• 제29권2호
• /
• pp.235-240
• /
• 2016

본 연구는 절화, 관상 및 의약소재로 이용가치가 높은 자생 숙은노루오줌의 종자 번식법을 개발하고자 수행되었다. 연구에 사용된 종자는 크기가 0.62×2.22 ㎜이며, 1,000립중은 40.5 ㎎으로 조사되었다. 종자의 기간별 수분흡수율을 조사한 결과, 2.57%였던 수분함량이 침지처리 24시간 만에 29.8%로 증가하였으며, 종피의 팽창이 관찰되었다. 숙은노루오줌의 종자는 저온요구성 광발아성으로 15℃, 명조건에서 최종발아율(40.8%)이 가장 높았으며, 발아상의 온도가 높아질수록 발아율은 낮아졌다. 암조건에서는 어느 온도조건에서도 전혀 발아되지 않았다. 종자에 생장조절제 및 무기염류를 처리한 결과, KNO₃는 농도에 관계없이 무처리구에 비해 우수한 발아촉진 효과를 나타내었다. 특히 KNO₃ 20 mM 처리구에서 최종발아율(77.8%)과 발아세(96.1%)가 향상되었으며, 평균발아소요일수(11.3일)와 T₅₀ (6.5일)도 효과적으로 단축시킬 수 있었다.

• 대한소아치과학회지
• /
• 제28권1호
• /
• pp.118-128
• /
• 2001

본 연구에서는 치경부의 심미수복에 이용되고 있는 7종의 재료를 시험재료로 선택한 다음 잇솔질이 이들 수복재료의 마모도에 미치는 영향을 평가하기 위해 전동식 마모시험기를 이용하여 잇솔질 하중 2.0N으로 100,000회의 잇솔질을 시행한 다음 각 시편의 평균 두께 감소와 표면조도를 측정하였고, 표면경도가 연마성 마모에 미치는 영향을 평가하기 위해 누프 경도를 측정한 결과, 다음과 같은 결론을 얻었다. 1. 누프 경도값은 F2000 군에서 79.7로 가장 높고 Heliomolar 군에서 20.0으로 가장 낮은 값을 보였으며, Tukey 다중범위검증법에 의해서 각 군 사이의 통계적 유의성을 검증한 결과 Compoglass 군과 Dyract AP 군을 제외 한 모든 군들 사이에서 상호간에 유의 한 차이를 보였다(p<0.05). 2. 표면조도는 Improved Fuji II LC 군에서 가장 높고 UniFil F군에서 가장 낮게 나타났으며, Tukey 다중범위검증법에 의해서 각 군사이의 통계적 유의성을 검증한 결과, Improved Fuji II LC군, F2000 군과 UniFil F군 사이에서만 상호간에 유의한 차이를 보였다(p<0.05). 3. 표면조도와 마모도는 치약으로 유치용의 겔 형 페이스트인 Tom & Jerry를 사용한 경우보다 성인용의 페이스트인 Perio $A^+$를 사용한 경우에 높게 나타났다(p<0.05). 4. 연마면에서는 기질레진의 선택적인 마모에 의한 필러의 돌출로 인해 표면조도가 증가된 양상이 관찰되었다.

• 한국해양바이오학회지
• /
• 제8권1호
• /
• pp.18-23
• /
• 2016

It is important to design photobioreactor by cheap material for economical microalgal biomass production. In this study, two types of marine photobioreactors (MPBR), made by either polyvinyl chloride (MPBR-PVC) or high density poly ethylene (MPBR-HDPE), are used and performance of these were compared. Tetraselmis sp. KCTC 12236BP is a green marine alga that isolated from Ganghwa Island, Korea, and the strain was used for marine cultivations using MPBR-PVC and MPBR-HDPE. The cultivations were performed three times in the spring season of 2012 using MPBR-PVC and of 2013 using MPBR-HDPE in the coastal area of Young Heung Island. As the results, MPBR-PVC shows higher biomass productivities than MPBR-HDPE, due to its high light transmittance. In the cultivations using MPBR-PVC, the average sea water temperature was $11.5^{\circ}C$ during the first experiment and $16.5^{\circ}C$ during the second and third experiments. Average light intensities during three times for experiments were 407.5, 268.1 and $273.0{\mu}{\cdot}E{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. The maximum fresh cell weight and average biomass productivity were $1.2g{\cdot}L^{-1}$ and $0.12g{\cdot}L^{-1}{\cdot}day^{-1}$. These results showed that Tetraselmis sp. KCTC12236BP were adapted well with the environmental conditions from ocean, and grow in the MPBR-PVC and MPBR-HDPE.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 추계학술대회
• /
• pp.46-46
• /
• 2019

The experiments were performed in the Jinan (elevation: 300 meters above sea level), Jeollabuk-do. Seedlings (n = 63 per $3.3m^2$) of ginseng cultivar (Cheonpung, Yeonpung) were planted on April 10, 2015. Shading material of plastic film house was blue-white film. Before the Planting seedling, silicate (3 kg/10 a) or chitosan (40 kg/10 a) was fertilized and foliar sprayed on the leaves 1000 times dilution solution once a month from May to September every year. The growth results of 5-year old ginseng surveyed in 2018 are as follows. The average air temperature in the plastic film house was the highest at $26.6^{\circ}C$ and $26.5^{\circ}C$ in July and August, respectively, and the highest temperature was $40.5^{\circ}C$ in July. The maximum daily temperature of $35^{\circ}C$ or more was 30 days, with the average soil temperature being $24.9^{\circ}C$ in August. The chemical properties of the test soil are as follows. pH was 6.4~6.9 level and EC was 0.35~0.46 dS/m. The organic matter content was 33.5~41.4 g/kg, and available-P content was 251.9~306.8 mg/kg. Exchangeable cations contents, such as K, Ca and Mg were all the appropriate ranges. The soil microbial density surveyed by the dilution plate method was 10~50 times higher than that of control (Non-treatment) and actinomycete density was 3~6 times higher. Pathogens of the genus Fusarium by Metagenome analysis decreased 91.3% and 68.2% respectively in the foliar sprayed of chitosan and soluble-silicate. The light intensity (PAR) in the blue-white film plastic film house gradually increased until July and then decereased, with the average of light intensity in March-October was $120.3umol/m^2/s$. The growth of aerial parts such as plant height and stem length was better than non-sprayed group in silicate or chitosan treatments and Yeonpung cultivar was superior to the Cheonpung cultivar. The SPAD value was higher in Yeonpung cultivar foliar sprayed with soluble-silicate. The growth of underground parts such as root length and taproot length were better in chitosan and soluble-silicate treatment than control, especially in Yeonpung cultivar foliar sprayed with chitosan was good in taproot length and taproot diameter, and fresh weight of root was 60.1 g. Ginsenoside contents were 24.9 mg/g and 22.4 mg/g, in the Cheonpung cultivar foliar sprayed with soluble-silicate or chitosan respectively, 28% and 15% higher than control (19.5 mg/g). The incidence of disease by Alteraria panax and Botrytis cinerea was 3~9% and 4~9%, respectively. High temperature damage rate was 3~5%.