• Journal of the Korean Vacuum Society
• /
• v.22 no.1
• /
• pp.13-19
• /
• 2013

It is expected that progress in building-integrated photovoltaic (BIPV) systems, improving the functionality and design of buildings, will be accelerated in the coming years. While the dye sensitized solar cell is considered one of the most important technologies in the BIPV field, the transparent silicon based thin film solar cell fabricated by thin film processes has drawn attention as a novel alternative. When the selective transmitting layer is applied to the solar cell, the conversion efficiency is improved due to the re-reflection of infrared light into an absorber layer with the transmission of visible light through the solar cell. In this work, we prepared Al-Ti based oxide thin films using cost-effective sputter deposition and examined their selective transmitting characteristics with various compositions. The transmittance and reflectance of the Al-Ti based oxide thin film changed with the variation of its composition, and the selective transmitting property was observed in the sample with the 25 nm-thick AlTiO layer. It is considered that the realization of transparent solar cells and the improvement of their conversion efficiency can be achieved by introducing the Al-Ti based selective transmitting layer.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.4
• /
• pp.293-299
• /
• 2002

The anchovy scoop net fishery is one of the important in the South sea and coastal of Jeju of Korea. They are using incandescent lamp as a fishing lamp at night to gather anchovy shoals in the water surface. Fishing lamp (AC 100 V 500 W$\times$2~3 or AC 100 V 1 ㎾$\times$1) was installed at 1 m ahead of the prow and 1.5 m height from the water surface. The fishing lamp let anchovy shoals rise to the water surface and are attracted to bag net. On this study, the distribution of submarine illumination of 1㎾ and 2 ㎾ incandescent lamp were analyzed and discussed to investigate the ability of fishing lamp which can gather anchovy shoals effectively. The submarine illumination of incandescent lamp showed peak in wave length 690 nm. The relationship between submarine illumination (L) and water depth (Z) of 1 ㎾ and 2 ㎾ incandescent lamp in vertical light is 1 ㎾ : L = 3851. 9 $e^{-1.4587Z}$ $R^2$=0.9952 2 ㎾ : L= 8211.9 $e^{-1.2852Z}$ $R^2$=0.9977 The submarine illumination of 2 ㎾ incandescent lamp of 0～4 m layers appeared to be 3 to 4 times higher than 1 ㎾ incandescent lamp, and in more deep layers than 6 m appeared to be equal value of each lamp. The light of incandescent lamp (1 ㎾) pass through much better into vertical direction than horizontal, and submarine illumination of 20 m layers was 1.0 l$\chi$. Therefore, fishing lamp power is thought that 1 ㎾ incandescent lamp is more efficient than 2 ㎾ to gather anchovy shoals in depth of 15~20 m to water surface.

• Korean Journal of Agricultural Science
• /
• v.40 no.2
• /
• pp.107-113
• /
• 2013

We tested fruits quality and skin coloration of two pear cultivar 'Wonhwang' and 'Whasan' produced by bagging with different kinds of paper bags in the Cheonan area, Chungnam Province, Korea. The fruits were bagged at 35, 45, 55 or 65 days after full bloom (DAFB) with 3 kinds of double layer paper bag which consisted of grey color, yellow color and newspaper for outer layer. The great extent of light interruption was observed in grey colored outer paperbag among three kinds of paperbag which showed only 0.46% of lowest light transmittance when compared with 43.7% and 40.0% of yellow paper and newspaper, respectively. The development of skin redness ($a^*$) increased with the delay of bagging time in two pear cultivars. But the fruits treated at 65 DAFB showed uneven coloration and excessive development of redness which represented low fruit external appearance value. Uniform flesh firmness was attained at the fruits bagged with grey outer color paperbag regardless of bagging time, although the fruit quality indices including soluble solids and titratable acidity did not change significantly by using different kind of fruit bags and bagging time in two pear cultivar. Based on our results, it was explained that the grey-colored fruit bag had positive effect on the development of skin coloration without any detrimental effect on fruit quality factors in 'Wonhwang' and 'Whasan' pears.

• Journal of Ginseng Research
• /
• v.36 no.4
• /
• pp.430-441
• /
• 2012

This study was conducted to evaluate the effects of natural bioactive products such as Manda enzyme (T1), Yangmyeongwon (T2), effective microorganisms (T3), and Kelpak (T4) on the growth and ginsenoside contents of Panax ginseng cultured in an aeroponic system using a two-layer vertical type of nutrient bath under natural light conditions. The growth of ginseng plants showed specific characteristics according to the positions in which they were cultured due to the difference of light transmittance and temperature in the upper and lower layers during aeroponic culture in a two-layer vertical type of system. The growth of the aerial part of the leaves and stems of ginseng plants cultured in the lower layer (4,000 to 6,000 lx, $23^{\circ}C$ to $26^{\circ}C$) of the nutrient bath was observed to be superior to that of the ginseng plants cultured in the upper layer (12,000 to 15,000 lx, $25^{\circ}C$ to $28^{\circ}C$). The leaf area was significantly larger in the treatment of T2 and T4 (46.70 $cm^2$) than with other treatments. Conversely, the values of the root weight and root diameter were higher in ginseng plants cultured in the upper layer of the nutrient bath. The root weight was significantly heavier in the treatment of T4 (6.46 g) and T3 (6.26 g) than with other treatments. The total ginsenoside content in the leaves and roots was highest in the ginseng plants cultured by the treatment of T1, at 16.20%, while the total ginsenoside content obtained by other treatments decreased in the order of T4, T5 (control), T2, and T3, at 13.21%, 12.30%, 14.84%, and 14.86%, respectively. The total ginsenoside content of the ginseng leaves was found to be significantly higher in the treatment of T1 in the lower layer of the nutrient bath, at 15.30%, while the content of the ginseng roots in the treatments of T3 and T4, at 1.27% and 1.23%, respectively, was significantly higher than in other treatments in the upper layer of the nutrient bath.

• Journal of Marine Bioscience and Biotechnology
• /
• v.8 no.1
• /
• pp.18-23
• /
• 2016

It is important to design photobioreactor by cheap material for economical microalgal biomass production. In this study, two types of marine photobioreactors (MPBR), made by either polyvinyl chloride (MPBR-PVC) or high density poly ethylene (MPBR-HDPE), are used and performance of these were compared. Tetraselmis sp. KCTC 12236BP is a green marine alga that isolated from Ganghwa Island, Korea, and the strain was used for marine cultivations using MPBR-PVC and MPBR-HDPE. The cultivations were performed three times in the spring season of 2012 using MPBR-PVC and of 2013 using MPBR-HDPE in the coastal area of Young Heung Island. As the results, MPBR-PVC shows higher biomass productivities than MPBR-HDPE, due to its high light transmittance. In the cultivations using MPBR-PVC, the average sea water temperature was $11.5^{\circ}C$ during the first experiment and $16.5^{\circ}C$ during the second and third experiments. Average light intensities during three times for experiments were 407.5, 268.1 and $273.0{\mu}{\cdot}E{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. The maximum fresh cell weight and average biomass productivity were $1.2g{\cdot}L^{-1}$ and $0.12g{\cdot}L^{-1}{\cdot}day^{-1}$. These results showed that Tetraselmis sp. KCTC12236BP were adapted well with the environmental conditions from ocean, and grow in the MPBR-PVC and MPBR-HDPE.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.55-60
• /
• 2020

The PERC photovoltaic (PV) modules installed in PV power plant are still reports potential-induced degradation (PID) degradation due to high voltage potential differences. This is because Na+ ions in the cover glass of PV modules go through the encapsulant (EVA) and transferred to the surface of solar cells. As positive charges are accumulated at the ARC (SiOx/SiNx) interface where many defects are distributed, shunt-resistance (Rsh) is reduced. As a result, the leakage current is increased, and decrease in solar cell's power output. In this study, to prevent of this phenomenon, a Moth-eye nanostructure was deposited on the rear surface of an optical film using Nano-Imprint Lithography method, and a solar mini-module was constructed by inserting it between the cover glass and the EVA. To analyze the PID phenomenon, a cell-level PID acceleration test based on IEC 62804-1 standard was conducted. Also analyzed power output (Pmax), efficiency, and shunt resistance through Light I-V and Dark I-V. As a result, conventional solar cells were decreased by 6.3% from the initial efficiency of 19.76%, but the improved solar cells with the Moth-eye nanostructured optical film only decreased 0.6%, thereby preventing the PID phenomenon. As of Moth-eye nanostructured optical film, the transmittance was improved by 4%, and the solar module output was improved by 2.5%.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.195-205
• /
• 2021

Purpose: The ultraviolet reflectance and transmittance of coastal building materials are one of the important factors of ultraviolet radiation in and out of coastal building. In this research, the ultraviolet spectral reflectance of many kinds of building materials was measured. Also, the relationships with the lightness, roughness, and chromaticity, which are surface characteristics, were reviewed and suggested. Method: In this study, according to the CIE classification, the ultraviolet region was defined as short-wavelength region UV-C(10nm~280nm), medium-wavelength region UV-B (280-315 nm), and long-wavelength region UV-A (315-400nm), and the visible light region was defined as (400nm~780nm). Spectrophotometer was used to continuously measure the reflectance from the ultraviolet region to the visible light region. Results: From the measurement results, the ultraviolet reflectance on Wood was shown to be about Visible 55-68%, UV-A^* 7-12%, and UV-B 4-5%. Wall tiles are about Visible18-40%, UV-A^* 8-20%, and UV-B^* 7-8%. That on concrete was shown to be about Visible 37%, UV-A^* 28%, and UV-B^*19%. Conclusion: The ultraviolet reflectance can be estimated by visible reflectance. Also, it is important to select a variety of materials according to the application when blocking UV.

• Journal of Industrial Convergence
• /
• v.20 no.12
• /
• pp.79-85
• /
• 2022

Recently, a smartphone manufactured on a flexible substrate has been released as an electronic device, and research on a stretchable electronic device is in progress. In this paper, a silicon-based stretchable material is made and used as a substrate to implement and evaluate an optical sensor device using oxide semiconductor. To this end, a substrate that stretches well at room temperature was made using a silicone-based solution rubber, and the elongation of 350% of the material was confirmed, and optical properties such as reflectivity, transmittance, and absorbance were measured. Next, since the surface of these materials is hydrophobic, oxygen-based plasma surface treatment was performed to clean the surface and change the surface to hydrophilicity. After depositing an AZO-based oxide film with vacuum equipment, an Ag electrode was formed using a cotton swab or a metal mast to complete the photosensor. The optoelectronic device analyzed the change in current according to the voltage when light was irradiated and when it was not, and the photocurrent caused by light was observed. In addition, the effect of the optical sensor according to the folding was additionally tested using a bending machine. In the future, we plan to intensively study folding (bending) and stretching optical devices by forming stretchable semiconductor materials and electrodes on stretchable substrates.

• Journal of Bio-Environment Control
• /
• v.9 no.3
• /
• pp.161-165
• /
• 2000

Spectroradiometric light transmittance from 300 to 1,100nm in the greenhouse covered with the CEM BIO polyethylene film was greater than that in the greenhouse covered with polyethylene film (control). As a whole, solar radiation transmittance into greenhouse was a half level, due to shades caused by double layer covering, frame and equipment. Net radiation energy emitted throughout surface of the greenhouse covered with CEM BIO polyethylene film was 5,424.5W.m$^{-2}$ , which was lower by 2.9% as compared to that of the greenhouse covered with polyethylene film. Photosynthetically active radiation from 400 to 700nm of the greenhouse covered with CEM BIO polyethylene film was 3,861.2W.m$^{-2}$ , which was higher by 3.8% as compared to hat of the greenhouse covered with polyethylene film. Accumulated minimum air temperature from Oct. 7, 1997 to Oct. 16, 1997 of the greenhouse covered with CEM BIO polyethylene film was 100.5$^{\circ}C$, which was higher by 2.5$^{\circ}C$ as compared to that of the greenhouse covered with polyethylene film. As results, height, stem diameter, leaf count, leaf area, fresh weight and dry weight of green pepper plants and canopy production structure measured at 30 days after transplanting were enhanced. Mean fruit weight n the greenhouse covered with CEM BIO polyethylene film was 11.28 g and 1.25 g greater as compared to that in the greenhouse covered with polyethylene film, due to increased fruit diameter and flesh thickness. Percent marketable fruits produced in the greenhouse covered with CEM BIO polyethylene film were 96.1%, and was greater by 2.7% thant that of the greenhouse covered with polyethylnee film due to decreased infection, sterility, severe curve and twisted fruits. The green pepper yield of the greenhouse covered with CEM BIO polyethylene film from Nov. 19, 1997 to Feb. 3, 1998 was greater by 974 kg per hectare than that of the greenhouse covered with polyethylene film, but the total fruit had no difference.

• Journal of Sensor Science and Technology
• /
• v.2 no.1
• /
• pp.101-108
• /
• 1993

$TiO_{2}$/Se : Te heterojunction for color sensor has been fabricated by RF reactive sputtering and thermal evaporation methods onto glass substrate. The optimum deposition condition of $TiO_{2}$ films was such that RF power was 120 W, substrate temperature was $100^{\circ}C$, oxygen concentration was 50%, working pressure was 50 mTorr for the $TiO_{2}$ film thickness of $1000{\AA}$. In this case, the optical transmittance of $TiO_{2}$ film at 550 nm-wavelength was 85%, resistivity was $2{\times}10^9{\Omega}{\cdot}cm$, refractive index was 2.3, and optical bandgap was 3.58 eV. The composition ratio of 0 to Ti by AES analysis was 1.7. When $TiO_{2}$ films were annealed at $400^{\circ}C$ for 30 min. in $O_{2}$ ambient, the optical transmittance of $TiO_{2}$ films at the wavelength range of $300{\sim}580$ nm was improved from 0 to 25%. When Se : Te films were annealed at $190^{\circ}C$ for 1 min., photosensitivity under illumination of 1000 lux was 0.75. The optical bandgap of Se : Te films was 1.7 eV. The structures of Se : Te films were the hexagonal with (100) and (110) orientation. The spectral response of a-Se was improved by the addition of Te, especially in the long wavelength region. The $TiO_{2}$/Se : Te heterojunction showed wide spectral response, and more improved one than that of a-Si film in the blue light region.