• Journal of Welding and Joining
• /
• 제25권2호
• /
• pp.43-48
• /
• 2007

Laser Transmission Joining (LTJ) of plastics is a process in which light of suitable wavelength is transmitted through a transparent substrate that is in contact with an absorbing one. In this paper, LTJ is investigated by preliminary experiments from the viewpoint of mechanical engineering. To understand transmitting characteristics of each polymer substrate, transmission rate, reflection rate and absorption coefficient of polymer are measured by using a laser power-meter. Characteristics of joining in the spot welding and seam welding are investigated by measuring the fracture load. Fracture load increases in accordance to the laser power and irradiation time. However, when the laser power is over 60W and irradiation time over 4seconds, fracture load decreases. This phenomenon is probably due to heat-softening of materials. Besides, cavities are generated at a joint by evaporation of water molecules, which can be suppressed by introduction of a gap between two substrates.

• 한국통신학회논문지
• /
• 제37권4A호
• /
• pp.219-226
• /
• 2012

본 연구는 조명 및 무선통신이 동시에 가능한 가시광 송수신기에 대해 가시광 통신 본연의 가시성, 무선 통신의 사용 편의성 그리고 고속의 통신 속도를 고려해 edge-emitting laser diode와 silicon photo diode를 기반으로한 고속 가시광 무선 송수신기를 구현하였다. 제안된 가시광 무선 송수신기는 120Mbit/s의 고속에서 양방향 전송이 가능하도록 설계되었으며 이때 발생하는 누화(crosstalk)를 방지하기 위한 방법으로 shielding 방식을 적용해 가시광 송수신기의 성능을 실험적으로 측정 분석하였다. 또 수신기의 시야각 확대를 위한 방법으로는 새로운 구조의 광학적 antenna를 적용해 광학적 antenna가 없는 두 개의 송수신기 사이의 전송링크 특성과 광학적 antenna를 사용한 두 개의 송수신기 사이의 전송링크 특성을 2차원 평면상에서 전송거리, 적용범위 그리고 기울임 정도를 변화시켜 실험과 시뮬레이션을 통해 그 성능을 비교 분석하였다.

• 한국세라믹학회지
• /
• 제41권5호
• /
• pp.364-369
• /
• 2004

The barrier and optical properties of AlO$_{x}$ thin films on polycarbonate deposited by Reactive Ion Beam Sputtering (RIBS) were investigated at different oxygen partial pressure. We measured the deposition rate of AlO$_{x}$ thin films. As the oxygen partial pres-sure increased, the deposition rate increased then decreased. The changes of deposition rate are associated with the properties of deposited films. The properties of deposited AlO$_{x}$ thin films were studied using X-ray Photoelectron Spectroscopy (XPS), Scan-ning Electron Microscopy (SEM), and Atomic Force Microscopy (AFM). Optimum deposition parameters were found for fabricat-ing aluminum oxide thin films with high optical transparency for visible light and low Oxygen Transmission Rate (OTR). The optical transmittance of AlO$_{x}$ thin film deposited on polycarbonate (PC) showed the same value of bare PC.bare PC.

• Carbon letters
• /
• 제25권
• /
• pp.84-88
• /
• 2018

At present, an important research area is the search for materials that are compatible with CMOS technology and achieve a satisfactory response rate and modulation efficiency. A strong local field of graphene surface plasmon polariton (SPP) can increase the interaction between light and graphene, reduce device size, and facilitate the integration of materials with CMOS. In this study, we design a new modulator of SPP-based cycle branch graphene waveguide. The structure comprises a primary waveguide of graphene-$LiNbO_3$-graphene, and a secondary cycle branch waveguide is etched on the surface of $LiNbO_3$. Part of the incident light in the primary waveguide enters the secondary waveguide, thus leading to a phase difference with the primary waveguide as reflected at the end of the branch and interaction coupling to enhance output light intensity. Through feature analysis, we discover that the area of the secondary waveguide shows significant localized fields and SPPs. Moreover, the cycle branch graphene waveguide can realize gain compensation, reduce transmission loss, and increase transmission distance. Numerical simulations show that the minimum effective mode field area is about $0.0130{\lambda}^2$, the gain coefficient is about $700cm^{-1}$, and the quality factor can reach 150. The structure can realize the mode field limits of deep subwavelength and achieve a good comprehensive performance.

• 한국통신학회논문지
• /
• 제25권1B호
• /
• pp.175-182
• /
• 2000

적외선을 이용한 수/발광 다이오드에 집적소자를 혼합한 Hybrid형 단거리 광무선 통신용 원칩모듈을 개발하였다. 발광다이오드는 850nm 의 적외선파장을 30$^{\circ}$지향각을 갖는 AlGaAs계 고속신호용으로서 전파지연이 60 ns 이며, PIN 포토다이오드는 Si계 반도체 수광소자로써 450-1050nm의 파장대에서 수광 흡수율이 양호하고 필터겸용 블록 에포시렌즈를 750nm 파장 저역대를 여과시켰다. 데이터 전송속도는 115.2 kbps이며 IrDA1.0 SIR 표준조건에서 동작이 양호함을 확인하였다.

• Journal of the Optical Society of Korea
• /
• 제19권5호
• /
• pp.514-520
• /
• 2015

This paper presents a novel shore-to-sea maritime data transmission system based on time-code diversity, using visible light in maritime environments to overcome the limitations of conventional maritime wireless communications. The proposed system is primarily comprised of existing LED-based lighthouses and maritime transceivers (marine beacons, buoys, etc.), and thus is considered cost-effective in terms of implementation. We first analyze maritime visible-light communications on the basis of the unique properties of a maritime environment, i.e. sea states (wave height, wind speed, etc.), plus atmospheric turbulence, using the Pierson-Moskowitz (PM) and JONSWAP (JS) spectrum models. It is found that the JS model outperforms the PM model, and that the coverage distance depends on the LED power and sea states. To combat maritime fading conditions that significantly degrade performance and coverage distance, we propose a time-code diversity (TCD) scheme in which the delayed versions of the original data are retransmitted using orthogonal Walsh codes. This TCD scheme is found to be superior, in that it offers three orders of magnitude in terms of BER performance, compared to a conventional (non-TCD) transmission scheme. The proposed scheme is robust and efficient in overcoming the effect of impairments present in maritime environments with a BER of approximately $10^{-5}$and a data rate of 100 Kbps at a distance of 1 km.

• Journal of information and communication convergence engineering
• /
• 제13권1호
• /
• pp.1-6
• /
• 2015

In this study, we consider visible light communication in an indoor line-of-sight environment. It has been proved that among the multiple input multiple output (MIMO) techniques, spatial modulation (SM) performs better than repetition coding (RC) and spatial multiplexing (SMP). On the basis of a combination of SM and pulse amplitude modulation (PAM), here, we propose an enhanced SM algorithm to improve the bit error rate. Traditional SM activates only one light-emitting diode (LED) at one time, and the proposed enhanced SM activates two LEDs at one time and reduces the intensity levels of PAM by half. Under the condition of a highly correlated channel, power imbalance is used to improve the algorithm performance. The comparison between the two schemes is implemented at the same signal-to-noise ratio. The simulation results illustrate that the enhanced SM outperforms the traditional SM in both highly correlated and lowly correlated channels. Furthermore, the proposed enhanced SM scheme can increase the transmission rate in most cases.

• 한국융합학회논문지
• /
• 제12권7호
• /
• pp.125-131
• /
• 2021

치과에서 사용횟수가 증가하고 있는 광중합형 레진 치료에는 강한 에너지를 가진 청색광이 필요하나, 그 빛은 산란 또한 커서 눈과 관련된 여러 부작용이 나타난다. 산란되는 빛에 노출되는 위험을 줄이고자 색깔 렌즈를 활용해보고자 하였다. 광중합기용 팁들과 청색광 빛의 차단에 효과가 있을 것으로 기대하는 시판용 노란색 계열의 청광 차단 렌즈와 노란색 염료로 착색한 노란색 렌즈를 UV-Vis 스펙트로미터 기기에 놓고 각각 청색광의 투과와 차단을 실험하였다. 결과로 광중합기용 팁들의 청광차단율 평균은 99.49%, 시판용 렌즈들 중 색 농도가 가장 높은 C 렌즈는 99.54%의 높은 청광차단율을 보였다. 노란색으로 착색한 렌즈의 경우에는 착색 농도가 가장 짙은 노란색 착색 C 렌즈가 87.57%의 청광차단율을 보였다. 레진 치료 시 광중합기용 팁과 함께 노란계열의 시판용 렌즈나 착색 렌즈를 착용한다면 청색광에 의한 눈과 관련된 부작용들을 줄일 수 있을 것으로 판단된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.189-192
• /
• 2004

To improvement life-time of the organic light emitting diodes(OLEDs). We investigate the inorganic composite film based on MgO and $SiO_2$ to protect from the moisture and oxygen. The inorganic composite films are added the base materials to the co-operate materials using the mixed process and it is deposited on plastic substrate by e-beam evaporator. In order to analyze as kinds of inorganic materials, Water Vapor method of Transmission Rate (WVTR) and Oxygen Transmission Rate (OTR) are measured by Permatran equipment(MOCON Corp.). For comparison. an MgD- and $SiO_2$-based composite film has lower values of WVTR and OTR than inorganic composite/compound films of ones. The results obtained here shows that this film is suitable for passivation layer to extend the life-time of OLEDs.

• 임산에너지
• /
• 제7권1호
• /
• pp.28-36
• /
• 1987

To know the possibility of fuel substitution for Diesel engine with the seed oil of Evodia daniellii, which is one of the native oil seed trees in Korea. the refined seed oil mixed with light oil in the various rates was tested in the 8 PS Diesel engine: the output, the fuel consumption rate, the governor performance, the rpm stability in the total loading condition. the content of graphite in the burned gas, and the traction coefficients at the different gear stages were maintained The following results were discussed. 1. The output at the normal revolution (2200rpm)was increased as the percent seed oil increased. At the lower rpm (2000-1500rpm )there were no consistent difference in the outputs among fuels of the different percent seed oil 2. The rate of fuel consumption was inclosed as the percent seed oil increased in each loading condition. 3. The more percent sud oil was mixed in the fuel. the better governor performance appeared at both the instantaneous and stable speed. 4. The more percent seed oil was mixed In the fuel, the more stable rpm ratio was maintained 5. The graphite content In the burned gas was increased as the load increased, but there was no apparent difference in the content at each load among the 100$\%$ seed oil, the 100$\%$ light oil, and the mixtures in various rates. 6. In all fuel mixtures the maximam traction coefficent appeared at the third transmission gear stage. Generally in over all transmission gear stages the fuel mixtures of the seed oil:light oil ratio from 7:3 to 5:5 resulted greater traction force than the other fuels.