• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2447-2449
• /
• 1999

This paper presents a distributed temperature sensor which uses a multimode optical fiber. The temperature distribution is derived from the intensity of the Raman back scattering light. Testing the sensors on measurement length of 2km of this system shows good temperature characteristics of the heated/cooled section. These performance will useful to design such as monitoring abnormal temperature rise of electric facilities.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2196-2198
• /
• 2005

The luminous intensity distribution of a 1W high-power LED with a wide view angle should be concentrated to be used as a light source for an automotive reading lamp. In this paper, an optical lens made of PMMA is simulated by using an optical design software for that purpose. As the result, with the help of the devised lens, the reading light gives over 80 lx at the center of a target surface of radius of 0.2m located below 0.5m from the lamp, and a minimum of 20 lx at the perimeter of the target surface. Thus, a 1W high-power LED with an appropriate lens would suffice for an automotive reading lamp.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.514-517
• /
• 2005

Microstereolithography(MSL) has evolved from the stereolithography technique, and is also based on a light-induced layer-stacking fabrication. Although integral MSL allows the manufacture of a complete layer by one irradiation only, there is a problem related with shape precision due to the light-intensity distribution of focused image. In this study, we developed the integral MSL apparatus using Digital Micromirror Device ($DMD^{TM})$, Texas Instruments) as dynamic pattern generator. It is composed of Xenon-Mecury lamp, optical devices, pattern generator, precision stage, controllers and the control program. Also, we have studied curing depth and width of photocurable resin according to the change of exposure energy.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2008년도 Spring Scientific Meeting(the 129th) of Korean Academy if Conservative Dentistry
• /
• pp.213-223
• /
• 2008

광물리학적 특성 분석을 위해 Apollo 95E (DMT Systems, Orange, CA : PAC 광중합기), Elipar Freelight 2 (3M ESPE, MN, USA; LED 광중합기) 그리고 VIP Junior (Bisco, Schaumberg, IL, USA : QTH 광중합기), 3종의 광중합기의 총광강도(Total intensity)와 spectral distribution을 측정하였고 특정 파장에 해당되는 광강도(Energy density)를 분석하였다. 상아질 전단접착강도의 측정을 위해 Scotchbond Multipurpose (3M ESPE), Single bond (3M ESPE) 그리고 Clearfil SE bond (Kuraray)가 사용되었다. Plasma Arc Curing light (Apollo 95E) 광중합기는 여러개의 최대정점을 가지며 넓은 spectral distribution과 $2307mW/cm^2$의 높은 광강도를 나타내었고, VIP Junior 광중합기는 490 nm에서 최대정점을 갖는 넓은 spectral distribution을 나타내었고, Elipar Freeelight 2 광중합기는 462 nm의 최대정점 주위로 좁은 spectral distribution을 보였다. Two-Way ANOVA와 Bonferroni's multiple comparison test를 이용하여 상아질 전단접착강도를 분석한 결과, PAC 광중합기와 LED 광중합기 간에 유의성 있는 차이를 보이지 않았으며 (P > 0.05), 상아질 접착제와 광중합기의 교호관계에도 유의성이 없었다. 그러나 상아질 접착제는 상호간에 유의성 있는 차이를 보였다 (P < 0.00).

• Restorative Dentistry and Endodontics
• /
• 제33권3호
• /
• pp.213-223
• /
• 2008

광물리학적 특성 분석을 위해 Apollo 95E (DMT Systems, Orange, CA; PAC 광중합기), Elipar Freelight 2 (3M ESPE, MN, USA; LED 광중합기) 그리고 VIP Junior (Bisco, Schaumberg, IL, USA; QTH 광중합기), 3종의 광중합기의 총광강도(Total intensity)와 spectral distribution을 측정하였고 특정 파장에 해당되는 광강도 (Energy density)를 분석하였다. 상아질 전단접착강도의 측정을 위해 Scotchbond Multipurpose (3M ESPE), Single bond (3M ESPE) 그리고 Clearfil SE bond (Kuraray)가 사용되었다. Plasma Arc Curing light (Apollo 95E) 광중합기는 여러개의 최대정점을 가지며 넓은 spectral distribution과 $2307mw/cm^2$의 높은 광강도를 나타내었고, VIP Junior 광중합기는 490nm에서 최대정점을 갖는 넓은 spectral distribution을 나타내었고, Elipar Freeelight 2 광중합기는 462 nm의 최대정점 주위로 좁은 spectral distribution을 보였다. Two-Way ANOVA와 Bonferroni's multiple comparison test를 이용하여 상아질 전단접착강도를 분석한 결과, PAC 광중합기와 LED 광중합기 간에 유의성 있는 차이를 보이지 않았으며 (P > 0.05), 상아질 접착제와 광중합기의 교호관계에도 유의성이 없었다. 그러나 상아질 접착제는 상호간에 유의성 있는 차이를 보였다 (P < 0.001).

• 수산해양기술연구
• /
• 제30권2호
• /
• pp.78-85
• /
• 1994

The author carried out an experiment to find out the response of Striped puffer. Fugu xanthoperus (Temminck et Schlegel) to the color lights. The experimental tank (300L$\times$50W$\times$50Hcm) was set up in a dark room. Six longitudinal sections with 60cm intervals are marked in the tank to observe the location of the fish. Water depth in the tank was kept 50cm level. Light bulbs of 20W at the both ends of the tank projected the light horizontally into the tank. Two different colored filters were selected from four colors of red, blue, yellow, and white, and the were placed in front of the light bulbs to make different colors of light. Light intensity was controlled by use of auxiliary filiters intercepted between the bulb and the filter. The fishes were acclimatized in the dark for 60 minutes before they were employed in the experiment. Upon turning on the light, the number of fish in each section was counted 40 times in 30 second intervals, and the mean of the number of fish in each section was counted 40 times in 30 second intervals, and the mean of the number of fish in each section was given as the gathering rate of the fish. The colors favourited by the fish was found in order of blue, yellow, white and red in the daytime, and blue, white, yellow and red at night. The difference of the average distribution on two different colors of light was 13.12%(4.10-26.55%), and the difference in the daytime(14.79%) was larger than at night (11.45%). Constantly the gathering rate of fish on illumination period was fluctuated with instability. As the gathering rate of fish on illumination period was fluctuated with instability. As the gathering rate on one color of light increased, the gathering rate on the other color of light decreased. The difference of the gathering rate on two different colors of light was comparatively distinct and the difference in the daytime was larger than at night.

• 한국분무공학회지
• /
• 제8권2호
• /
• pp.38-45
• /
• 2003

This study was carried on the combustion characteristics of a pure light oil and emulsified fuels at high-pressure injection in a spray combustion installation, The volume fractions of water in an emulsion were varied up to 30% and the injection pressures were 7.5, 100, 200, and $300kg_f/cm^2$. The concentrations of NOx and the average temperatures of flame were measured. And Images of OH radical using ICCD camera and instantaneous schlieren photography of flames were photographed. It was found that the temperature distribution of axial distance in the emulsified fuels was increased in the upstream and decreased in the down stream. The temperature distribution of radial distance was high at the peripheral regions of the spray in the upstream and at the central regions of spray in the downstream, The intensity of OH radical was denser at the water content 10% than at the pure light oil over the injection pressure $200kg_f/cm^2$.

• 한국통신학회논문지
• /
• 제39C권3호
• /
• pp.234-238
• /
• 2014

Multichip packaging was achieved the best solution to significantly reduce thermal resistance at the same time, to increase luminance intensity in LEDs packaging application. For the packaging, thermal spreading resistance is an important parameter to get influence the total thermal performance of LEDs. In this study, silicon-based multichip light emitting diodes (LEDs) packaged module has been examined for thermal characteristics in several parameters. Compared to the general conventional single LED packaged chip module, multichip LED packaged module has many advantages of low cost, low density, small size, and low thermal resistance. This analyzed module is comprised of multichip LED array, which consists of 32 LED packaged chips with supplement power of 0.2 W at every single chip. To realize the extent of thermal distribution, the computer-aided design model of 6.4 W Si-based multichip LED module was designed and was performed by the simulation basis of actual fabrication flow. The impact of thermal distribution is analyzed in alternative ways both optimizing numbers of fins and the thickness of that heatsink. In addition, a thermal resistance model was designed and derived from analytical theory. The optimum simulation results satisfies the expectations of the design goal and the measurement of IR camera results. tart after striking space key 2 times.

• 한국실내디자인학회논문집
• /
• 제26권4호
• /
• pp.30-41
• /
• 2017

Sunlight is perceived by human beings first through the epidermis to space, and is a non - material medium that provides physical awareness of space, diversified expression of spaces, and plenty experience. The purpose of this study is to investigate the characteristics of active building skin based on the inflow of natural light required by humans, looked through among the works of Jacques Herzog & Pierre de Meuron, which show the characteristics of active building skin, TEA(Tenerife Espacio de las Artes, 2008), Messe Basel New Hall (2013) and Elbphilharmonie (2016). First, the interaction between Sunlight and space is divided into spatial characteristics and sensitivities according to their concepts, properties, and characteristics. The characteristics of active skin by light are classified into a physical approach and a constructive approach. Second, (El Croquis 152/153) and analyzed the images, detail drawings, and elevations, and simulated them in 3D to express the relationship between light and active building skin. Third, the changes of light intensity, light color, and distribution of light according to the time of light entering and the skin are determined from 6:00 am to 6:00 pm. Fourth, the images taken from January 30th to February 7th, 2017 on the site were compared with the computer simulated images, and the relationship between active skin and light was compared. This study is to recognize the existence and necessity of light required for human being through the activated epidermis differentiated from the limited or closed epidermis focused on information transmission, I would like to emphasize that I would like to take a step closer to the necessity and possibility of new attempts and developments so that I can feel the various experiential spaces by.

• 한국멀티미디어학회논문지
• /
• 제15권11호
• /
• pp.1399-1408
• /
• 2012

광원은 그래픽 모델의 색상과 밝기에 영향을 미치는 중요한 요소이며, 사실적인 합성 결과를 얻기 위해서는 실세계에 존재하는 모든 광원의 정보를 정교하게 저장하고 적절히 활용할 수 있어야 한다. 실세계 광원정보를 HDR 환경 맵으로 표현하여 높은 정확도로 저장하는 것이 가능하지만, 고정된 조명 환경에서 촬영된 한 장의 HDR 환경 맵만으로는 동적 가상 조명 위치에 대한 새로운 환경 맵을 생성하는 것은 불가능하다. 본 논문에서는 미리 정의된 위치와 방향에서 촬영된 대표 HDR 환경 맵들을 이용하여 임의로 선택된 위치에 대응하는 가상 광원의 정보를 동적으로 생성하는 기법에 대해 설명한다. 본 기법은 입력된 대표 HDR 영상들로부터 분석된 광원의 밝기와 분포 등의 정보를 기반으로 영상 보간을 통해 가상 조명에 대한 HDR 환경맵을 자동 계산한다. 보간 결과로 얻어진 정보를 영상기반 라이팅 기법에 활용함으로써 가상 광원의 효과가 그래픽 모델의 렌더링 결과에 사실적으로 반영될 수 있음을 보인다.