• 대한치과보철학회지
• /
• 제17권1호
• /
• pp.35-46
• /
• 1979

A number of experimental studies have been carried out in order to clarify the question as to how temporomandibular joint adapt to the changes of mandibular movement and occlusal equilibration. Recently, the studies on the interrelations between anatomical structure of temporomandibular joint and the state of occlusion have been actively performed in dentistry particularly in prosthodontic field. Author performed extraction of unilateral mandibular molars in 30 mature male rats, and observed histological changes of temporomandibular joint through the light microscope. Following results were obtained. 1. The loss of unilateral teeth gave rise to the changes in the location of condylar head, that is, interior displacement of condylar head in the extraction side and upper displacement in the non-extraction side. 2. Articular disk was compressed by the interior surface of condylar head, resulting in its extension below the condylar neck in the extraction side, and the histological arrangement of the compressed area showed irregular feature. 3. The extension of articular disk below the condylar neck was accompanied with the contraction of muscle fibers which were originated from the articular disk. 4. The cartilage layer of articular fossa to the exterior of the extraction side showed hypertropy. 5. Early in the experiment, the inernal extremity of condylar head of extract ion side showed bone resorption, and cartilage layer of condylar head showed hypertropy. At 12 weeks after experiment, the condylar surface showed flattened, and the cartilage layer of condylar head was replaced by the compact bone. 6. The articular disk showed the formation of pannus in the extraction side as well as in the non-extraction side. 7. The occlusal disturbance due to unilateral missing teeth has brought about the non-inflammatory retrogressive change and osteoarthrotic change late in the experiment.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.221-221
• /
• 2013

Vertical LED (VLED) has been recognized as a way to obtain the high-power LED due to their advantages [1]. However, approximately 4% of the light generated from the active region is extracted, if the light extraction from side walls and back side is neglected because of Fresnel reflection (FR) and total internal reflection (TIR) [2,3]. In this study, the optical simulation of the VLED with the various microstructures was performed. Among them, the microlens having the diameter of 3 ${\mu}m$ and the height of 1.5 ${\mu}m$ shown the best result was chosen, and then, optimized microlens was formed on a GaN template using conventional semiconductor process. Various microstructures were proposed to improve the light extraction efficiency (LEE) of the VLED for the simulation. The LEE was simulated using LightTools based on a Monte Carlo ray tracing. The microstructures with hemisphere, cone, truncated and cylinder pattern having diameter of 3 ${\mu}m$ were employed on the top layer of the VLED respectively. The improvement of the LEE by using the microstructure is 87% for the hemisphere, 77% for the cone, 53% for the truncated, 21% for the cylinder, compared with the LEE of the flat surface at the reflectance of 85%. The LEE was increased by 88% at the height of 1.5 ${\mu}m$, compared with the LEE of the flat surface. We found that the microlens on the top layer is the most suitable for increasing the LEE. In order to apply the proposed microlens on n-GaN surface, we fabricated microlens on a GaN template. A photoresist array having hexagonal-closed packed microlens was fabricated on the GaN template. Then, optimization of etching the GaN template was performed using a dry etching process with ICP-RIE. The dry etching carried out using a gas mixture of Cl2 and Ar, each having a flow rate of 16 sccm and 10 sccm, respectively with RF power of 50 W, ICP power of 900 W and chamber pressure of 2 mTorr was the optimum etching condition as shown in Fig. 2(a).

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.157-159
• /
• 2009

LED BLU(Back Light Unit), based on MCPCB(Metal Core Printed Circuit Board) with anodizing oxide dielectric layer and improved thermal dissipation property, are presented. Reflecting cups were also formed on the surface of the MCPCB such that optical coupling between neighboring chips were minimized for improving the photon extraction efficiency. LED chips were directly attached on the MCPCB by using the COB (Chip On Board) scheme.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권4호
• /
• pp.369-372
• /
• 2000

The purpose of this study was to investigate the distribution pattern of CGRP immunoreactive nerve fibers in the healing mucosa of extracion wound. Maxillary 1st molars of rats were extracted. All extraction sites and adjacent tissues of 3 groups of rats(1-week, 2-week and 4-week groups) were removed en bloc and processed for immunostaining and were subjected to light microscopic examination. The results obtained were as follows; In 1-week group, there was no difference in the distribution pattern of CGRP immunoreactive nerve fiber between epithelial margin adjacent to extraction socket and normal gingival epithelium. In 2-week group, some CGRP-immunoreactive nerve fibers were seen in epithelial layer. In 4-week group, many intercellular CGRP immunoreactive nerve fibers were abundant in all layers of immature epithelium characterized by scab on the mucosa and thick keratinized cell layer with irregular surface. Intraepithelial CGRP immunoreactive nerve fibers were reduced to normal level in adjacent mature epithelium. These results suggest that density of CGRP immunoreactive nerve fibers are increased transiently in epithelium during reepithelialization process and CGRP released from these nerve fibers may play an important role in the reepithelialization in the wound healing.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.1-5
• /
• 2022

We presented a micro hemi-sphere structure flexible film to improve the external quantum efficiency (EQE) in OLEDs. The micro hemi-sphere flexible film was fabricated with breath figure (BF) method and replica process. At 45 mg/mL of concentration, the size of the hemi-spheres was approximately 6.2 ㎛ were obtained which are the most circular shape. So, it was possible to yield the best performance with an improvement of 33 % in the EQE and the widest viewing angle ranging from 0° to 70°. As a result, the hemi-sphere film's size and distribution seem to play important roles in enhancing the EQE in OLEDs. Furthermore, the flexible hemi-sphere film based on polymeric materials could offer an effective, large-scale, mass-produced product and a simple process and approach to achieve high efficiency in flexible OLEDs.

• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.965-970
• /
• 2008

접촉분해경유의 산화반응후 포함된 산화황화합물을 분리하기위해 다양한 용매를 사용하여 용매추출에 관한 연구를 수행하였다. 용매로는 극성을 가진 물, N-메틸피놀리논, 에틸아세테이트, 디메틸포름아마이드, 이소프로필알코올, 아세토니트릴, 메탄올등을 사용하였다. 실험결과, 접촉분해경유와 용매와의 층분리는 적절한 양의 물을 첨가한 경우에 이루어졌으며, 물과 N-메틸피놀리논을 혼합한 혼합용매가 접촉분해경유로부터 산화황화합물의 선택적인 분리에 가장 적절하였다. 또한 접촉분해경유로부터 황화합물을 99.5% 이상으로 제거하기 위해선, 4단 정도의 평형추출이 필요하였다.

• 공업화학
• /
• 제32권2호
• /
• pp.214-218
• /
• 2021

We investigated the optimal stacked structure from the perspective of process architecture (PA) through emission spectrum analysis according to the wavelength of quantum dot (QD)-organic light-emitting diodes (OLED). We confirmed that the blue-light leakage through the QD can be minimized by increasing the QD filling density above a critical value in the red QD (R-QD) layer. In addition, when the thickness of red-color filter (R-CF) at the upper part of the R-QD increased to more than 3 ㎛, the leakage of blue light through the R-CF was effectively blocked, and a very sharp emission spectrum in the red wavelength band could be obtained. According to these outstanding results, we expect that the development of QD-OLED displays with very excellent color gamut can be possibly realized.

• 한국재료학회지
• /
• 제21권5호
• /
• pp.273-276
• /
• 2011

Ultraviolet (UV) light emitting diodes (LEDs) were grown on a patterned n-type GaN substrate (PNS) with 200 nm silicon-di-oxide (SiO2) nano pattern diameter to improve the light output efficiency of the diodes. Wet etched self assembled indium tin oxide (ITO) nano clusters serve as a dry etching mask for converting the SiO2 layer grown on the n-GaN template into SiO2 nano patterns by inductively coupled plasma etching. PNS is obtained by n-GaN regrowth on the SiO2 nano patterns and UV-LEDs were fabricated using PNS as a template. Two UV-LEDs, a reference LED without PNS and a 200 nm PNS UV-LEDs were fabricated. Scanning Electron microscopy (SEM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), Photoluminescence (PL) and Light output intensity- Input current- Voltage (L-I-V) characteristics were used to evaluate the ITO-$SiO_2$ nanopattern surface morphology, threading dislocation propagation, PNS crystalline property, PNS optical property and UVLED device performance respectively. The light out put intensity was enhanced by 1.6times@100mA for the LED grown on PNS compared to the reference LED with out PNS.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.97-98
• /
• 2008

n-ZnO/p-Si heterostructure is a good candidate for ZnO-based heterojunction light emitting diodes(LED) because of its competitive price and lower driving voltage. However, the conventional LED shows much lower extraction efficiency, because it has small top contact and large backside contact. In this structure, the injected current from the top contact enters the active region underneath the top contact. Thus, the emitted light is hindered by the opaque top contact. This problem can be solved by using a current-blocking layer(CBL) that prevents the current injection into the active region below the top contact.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.132-132
• /
• 2010

In a previous report, we demonstrated that poly (3,4-ethylenedioxythiophene) derived from poly (ionic liquid) (PEDOT:PIL) constitutes a polymeric hole-injecting material capable of improving device lifetime in organic light-emitting diodes (OLEDs).was attributed to aprotection characteristic of PEDOT:PIL for the indium extraction from ITO electrodes, which frequently occurrs in the OLED device with the conventional PEDOT materials. In this study, we report the OLED device lifetime as well asvice efficiencycan be further improved with the modified PEDOT:PIL in whichorganic compounds are incorporated. The deviced performance will be presented in terms of device lifetime and efficiencies.