• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.71-77
• /
• 2000

The color of an esthetic restorative material is controlled primarily by thickness of the material and background color. Although the effects of the two factors on the color coordinates of esthetic dental materials have been reported, the mechanism has not been clarified well enough to explain the effects quantitatively. The purpose of this study was to evaluate the effect of thickness and background color on the color of tooth colored restorative materials quantitatively. One hundred sixty samples were fabricated from two commercial light-cured composite resins and two commercial compomers. The color characteristics and changes in the color coordinates were measured by a tristimulus colorimeter (Model TC-6FX, Tokyo Denshoku Co. Japan) using the CIELAB system. The results were as follows: 1. As thickness increased from 1.0 to 4.0mm, values of $L^*$ $a^*$ $b^*$ changed irregulary for white and dentin color background, but showed no obvious difference in color for black background. 2. The colors of composite resins and compomers were significantly influenced by background color. 3. The color difference was recognized even the same shade name in four representative kinds of composite resins and compomers. 4. As thickness changed, values of color difference for same products and same background color showed constancy, but showed difference for different background color.

• Journal of Fashion Business
• /
• v.23 no.2
• /
• pp.62-76
• /
• 2019

The importance of color is increasing in modern life and we call such present age that is 'color age'. These day that all areas of life are being getting fashionize, ordinary people as well as design specialist are required of culture and knowledge about color. Color design education is important curriculum at liberal arts course and in special design trainning course. Color expresses by hue, value and chroma in Munsell color system. But design spot is using mainly hue and tone color system. Therefore it is very important that educate tone concept in color design education. When think influence that increase of color, we must develop hue and tone color system in suitable for color design education. This research designed usable 'Hue and Tone 313 Colot System' for efficeint sensual color education. Also I designed 313 color papers with attached the Munsell notation which could reappear the spare color paper when needed. The 10 hues classification of this system are Red, Yellow Red, Yellow, Green Yellow, Green, Blue Green, Blue, Purple Blue, Purple, Red Purple. The 19 tones classification of this system are vivid, light, standard, deep, pale, soft, dull, dark, very pale, light grayish, medium grayish, dark grayish, very dark, off White, off Pale, off Light Gray, off Medium Gray, off Dark Gray, off Black. The special colors of this system are gold, silver and copper.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.16 no.1
• /
• pp.37-42
• /
• 1980

The purpose of the present study is to find the color induced maximum gathering rate and to observed'the trend of the - gathering rate by using two species of commercial fishes: rock bream, Oplegnathus fasciatus (Temminet et Schlegel) and 'grass puffer, Fugu niphobles (Jordan et Snyder). An experimental tank($360L{\times}50W{\times}55H cm$) was set up in a dark room. An illumination system was attached to the two end of tank to fix horizontal light intensity by co~bination c' one light bulb(20W) and four filters (red, blue, yellow, white) and the five regulating filters in order to fix light intensity. During the experiment water depth was maintained 50 cm lever in the tank. The tank was marked into six longitudinal sections each being 60 em long to observe the distribution of fish. The fish were acclimatized in dark condition for 40 minutes prior to the main experiment. Upon turning on the light, the number of fish in each section was counted 40 times every 30 seconds, and the gathering rates ,were obtain from the average number of fish in each secion. The color induced maximum gathering rate of rock bream appeared to be red, blue yellow and white color orderly.However, that of grass puffer appeared to be blue, white, yellow and red color orderly. Trend of the gathering rate in illumination time showed the remarkable fluctuation in the rock bream and little difference at the two color light sources. However, trend of the gathering rate in illumination time showed the little fluctuation in grass puffer and much difference at the two color light sources.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.215-226
• /
• 1993

Color stability of tooth colored restorative resins is an important factor, particularly in anterior teeth restoration. The purpose of this study was to evaluate the color stability and opacity change of several light curing composite resins. Specimens of eight composite resins(Prisma AP. H., Brilliant Enamel, Charisma, Durafil, Helio Progress, Herculite XR, P-50 and Silux Plus) were divided into two groups : In Group 1, the specimens were polymerized by visible light curing unit for 60 seconds on both sides and in Group 2, the post-cured specimens were heat tempered by light/heat curing unit for 45 units(about 18 min.). All specimens were stored in distilled water at $60^{\circ}C$ for 30 days. The color characteristics($L^*,a^*,b^*$) and opacity of the specimens before and after immersion were measured by spectrocolorimetry and the total color difference(${\Delta}E^*$) and opacity change (${\Delta}Y%$) were computed. The results obtained were as follows : 1. SP and APH in both groups, DF, HP and HXR in Group 1 showed ${\Delta}E^*$-value above 2.0. 2. DF, HP, SP and HXR in Group 1 showed higher ${\Delta}E^*$-value than in Group 2, but the others had no significant difference. 3. The opacity of CH and HXR in Group 1, and of CH and BE in Group 2 decreased after immersion, while that of the others increased. 4. Opacity change of BE, P50 and HXR was significantly different between Group 1 and 2. These results suggest that color change in the post-cure heat tempered specimens by light/heat curing unit was smaller than that of the specimens polymerized by visible light curing unit. No clinically detectable opacity changes were noted for any materials in either goup.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.49-59
• /
• 2005

This paper proposed a six-color separation using additional colorants and quantitative granularity metric to reduce color difference and graininess. In the conventional method, light magenta and light cyan are used in the bright region instead of magenta and cyan. However, the hue value of liBht magenta and light cyan is different from the one of magenta and cyan in CIELAB space, so that this makes the colorimetric reproduction more or less inaccurate. To improve this inaccuracy, the proposed method uses yellow and light magenta colorants as the additional colorants. In the bright region, magenta is replaced with light magenta and yellow, while cyan is replaced with light cyan and light magenta. This selection reduces hue difference because it creates the color of similar hue to magenta and cyan. In addition, smooth image can be simultaneously obtained by the less dot visibility of additional colorants. In the middle region, magenta is replaced with light magenta and magenta, while cyan is replaced with light cyan and cyan. The use of two colorants having a different concentration makes the dot Pattern coarse. To reflect this Phenomenon, quantitative granularity metric is used. In the dark region, only magenta and cyan colorant is used as usual. Through experiments, it is shown that the proposed method improves both colorimetric and smooth tone reproductions.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.3
• /
• pp.121-131
• /
• 1998

The object color does not look same under the different light source. It depends on the surface spectral reflectance and the spectral distribution of light source. Therefore we should find the surface spectral reflectance of object color and the spectral distribution of light source for color reproduction. Using Wiener estimation, we can estimate the spectral reflectance from low dimensional images obtained with multi-band image acquisition system. The kind and the number of imaging filters have the effect on the estimation of the spectral reflectance. Therefore it is important that optimal filters are selected to minimize the error of the result. In this paper, we describe methods to select optimal filters with minimum error between measured and estimated surface spectral reflectance and to estimate surface spectral reflectance of Munsell color chart from six multi-band images by using Wiener estimation.

• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.74-79
• /
• 2015

A novel color clustered optical RGB multiple-input multiple-output (MIMO) system is presented. As visible light can be divided into three primary regions of red, green and blue, data can be modulated and transmitted separately using these three color clusters. Each color cluster comprised of 30 RGB LEDs is modulated using on-off-keying (OOK), and selection combining is performed at the receiver, producing a diversity effect within that color cluster. The simulations demonstrate that the proposed RGB MIMO VLC system provides high performance via a relatively simple design of MIMO. Moreover, the proposed system ensures sufficient illumination from LEDs and offers extended distance if more LEDs are applied.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.10
• /
• pp.911-915
• /
• 2008

EL (electro-luminescent) device as a light source has an advantage in embodying large area with great flexibility. On nickel foil as an electrode and backplane, we demonstrated a white EL flexible light source with blue phosphor layer combined with color change layer. A correlation between color change layer and color coordination was analyzed by Gaussian method, and then the color coordinate was controlled near to (0.33, 0.33) of pure white light.

• Journal of the Optical Society of Korea
• /
• v.18 no.4
• /
• pp.345-349
• /
• 2014

A direct-lit color-matching liquid crystal display using a lenticular lens array with grouped lens elements that image linear RGB light sources on the RGB subpixels of a color filter to enhance transmittance is designed, simulated, and fabricated. The RGB LED linear light sources were fabricated using small RGB LEDs in a linear array arrangement, and the lenticular lens array consisted of eight units of the same structure with a gap of 2.19 mm. The optical transmittance of the liquid crystal panel was improved by as much as 240% due to the color matching.

• Journal of the Korea Furniture Society
• /
• v.26 no.4
• /
• pp.467-473
• /
• 2015

Natural dyeing is considered to be an alternative to chemical staining in terms of harmful VOC-free and environmentally-friendly ingredient. This study was concerned with an evaluation of color performance of naturally dyed- and painted veneer for cylindrical laminated veneer lumber etc. according to the used condition in terms of existence of light and heat in drying. From the results, the color changes by the color of dyed veneer and the type of paint are likely to be affected by fading condition of light or heat. In the future, long-term outdoor exposure test needs to be additionally followed in order to evaluate durable usability of colored veneers.