• 한국안전학회지
• /
• 제29권4호
• /
• pp.191-198
• /
• 2014

In the event of continued train operation being impossible as the result of a breakdown, it will be essential to dispatch a relief train to recover the broken down train. Operation of relief train carries with the risk of collision in the process of connection with broken down train. The present study looks at the suitability of risk management procedures and associated problems in the light of case studies of relief train operation, and of national legal standards and railroad company regulations. It looks at appropriate methods of risk management and the problems that can arise. Based on the study a method is proposed of operating the relief train which is consistent with appropriate risk management. The proposed method will improve the safety of relief train operation, It is hoped that the results of the study will be reflected in relevant laws and operating company regulations, and so contribute to enhancing the overall level of railroad safety.

• 한국안전학회지
• /
• 제28권6호
• /
• pp.49-56
• /
• 2013

The statistics of recent accidents in warehouses show that a heavy toll of lives were produced by various accidents, e.g. collision, overturn, fall, slip, exposure to harmful substances or environments, etc. Of significant concern amongst them is the collision, especially the collision between forklift and storage rack structure. Accordingly, this study focuses on behavioral characteristics of rack structure subjected to dynamic impact loading of a forklift. For this purpose, time-domain response analysis has been performed on a standard 2-bay six-story rack structure consisting of columns, beams and bracing members with perforated open section. In order to investigate the most critical scenario, the impact loads are applied in both down-aisle and cross-aisle directions, and the impact locations are also varied along the shelves of the palettes. In order to deal with storage distributions, three types of rack structures are further taken into account: original empty rack structure with no storage, half-loaded rack structure and fully-loaded rack structure. The numerical simulation results demonstrate that the dynamic characteristics of the rack structure are significantly dependent on the distribution of the storage goods and its natural period varies from 0.24sec to 1.06sec, approximately 4.4 times. Further, the parametric studies show that the forklift impact is most critical to the safety of the rack structure when it collides either at the base or at the top of the rack structure.

• 한국항해항만학회지
• /
• 제38권2호
• /
• pp.105-110
• /
• 2014

정부는 2010년 신재생에너지발전전략을 수립 시행함에 따라 2011년 11월 "서남해안 2.5GW 해상풍력개발 종합추진계획"을 발표하였다. 이와 같이 친환경에너지 정책에 따라 해상에 설치되는 풍력발전단지는 계속 증가할 것이다. 해양풍력발전단지의 개발은 풍력뿐만 아니라 해상교통환경도 고려해야 한다. 특히 풍력발전단지의 항로표지는 인근지역을 항해하는 선박과 구조물의 충돌을 방지하는 중요한 역할을 한다. 국제항로표지협회에서는 풍력단지의 식별을 위해 해양풍력단지의 가장자리 구조물(SPS)과 외각 선의 중간 구조물(IPS)에 등광을 설치하도록 규정하고 있다. 그러나 이들 등광을 식별함에 있어 중요한 역할을 하는 등질에 관해서는 언급하지 않고 있고 적합한 등질 선택에 관한 연구도 부족한 실정이다. 따라서 본 연구에서는 해양풍력발전단지를 표지하는 SPS와 IPS의 등광설치에 관한 국내외 규정을 검토하고 다른 항로표지 등광과 혼동되지 않으면서 식별이 용이한 등질의 패턴과 리듬을 제안한다. 제안된 등질은 시뮬레이션 검증을 수행하였으며, 그 결과 SPS의 등질 "Fl Y(4) 12s"와 IPS의 등질 "Fl Y 6s"의 조합 동기점멸이 유용한 것으로 분석되었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.326-330
• /
• 2007

Bumper back beam is one of the essential structural components of front-end module. It should be designed to withstand a minor bump in low-speed collision, 2.5 mph crash test for example. And weight reduction is always important problem in the design of almost all the parts in car for energy saving. So, the key issues in shape design of a bumper are weight reduction and the performance in 2.5mph crash test. In this study, a light weight and high performance bumper back beam model was developed using analytical approach based on mechanics and FE simulation together.

• 정보저장시스템학회논문집
• /
• 제4권1호
• /
• pp.13-18
• /
• 2008

Scratches are observed on a polymer cover-layer of near-field recording (NFR) media after a servo test with rotating disc. The scratches are formed by the collision of a solid immersion lens (SIL)-media. One of the possible ways to avoid the scratch problem is to coat a dielectric protective film on the polymer cover-layer which enhances the hardness of the surface. The surface with hard characteristics in the surface reduces the scratch problem in the cover-layer. Not only the mechanical properties but also the optical properties should be controlled. Specifically, the refractive index of the dielectric protective film should be matched with the polymer cover-layer not to lose light at the interface due to the difference of the refractive index. The refractive index of the dielectric film can be tailored by controlling process parameters during sputtering and matched with that of the polymer cover-layer.

• 동아시아경상학회지
• /
• 제2권4호
• /
• pp.48-55
• /
• 2014

Indian railways has been regularly in the news albeit for the wrong reasons. The frequency with which train accidents have been taking place has led to serious doubts in the public mind about the safety of rail travel and also the health of the network. Against this background, an attempt is made in this paper to assess the trends in railway accidents for the period from 2000-01 to 2009-10. The paper also highlighted the various measures taken by IR to prevent accidents to ensure safety to the public.

• 소성∙가공
• /
• 제12권2호
• /
• pp.128-133
• /
• 2003

In this study, the momentum conservation type punching mechanism for micropunching system was developed to avoid the punch failure in the misaligned status between the punch and die. The punching energy can be precisely controlled by the falling height of the projectile mass and the intermediata mass, which contacts with the punch, transmit the energy to the punch with the same contact condition. The potential energy of the projectile mass is converted to kinetic energy at the light weight punch that the projection speed into the sheet metal workpiece can be accelerated. The butt formation characteristics for the alignment condition and for the projection speeds are investigated to verify the feasibility of the proposed punching mechanism.

• 수산해양교육연구
• /
• 제15권1호
• /
• pp.123-133
• /
• 2003

The present investigations were carried out for the most and fundamental elements, what is called maneuverability, stability, safety, rig, sail about the world famous race, VOLVO60 and America's cup. The results obtained are summarized as follows: First, the structure of yacht should be designed with focuse on the preparation for the preparation of collision with other yachts around, with the dumps of iceberg and also whales nearby. At the same time, the accurate calculation on the each structure and equipment of yacht should be processed for the dynamic stability in the rainstorms. Second, VOLVO60, long-distance sailing, should be emphasized on the light weight and the safety, while the boat for America's cup, short-distance sailing, should be stressed on the appropriate weight of the body and the maximum speed for fast maneuverability. Third, up-to-the minute materials should be developed for the appropriate wind power and the turning of directions.

• 산업기술연구
• /
• 제15권
• /
• pp.5-13
• /
• 1995

Natural gas, which is getting more important as a fuel, should be liquefied and shipped in a special tank. During transportation, a spill of liquefied natural gas(LNG) could occur by a collision or even an accident. As a result, violent explosion called the superheat-limit explosion(SLE) can take place in some cases, unexpectedly. Such explosion may result from the formation of a superheated liquid which has attained the superheat-limit temperature when hot(water) and cold(LNG) liquids come into contact. Natural gas mixtures can be considered as discrete light components plus continuous heavy fractions where several continuous distribution function can be adopted. This work is aiming at prediction of the superheat-limit explosion condition by suing continuous thermodynamics development of algorithm to predict.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.121-122
• /
• 2016

Recently in the domestic construction industry, source depletion has resulted in instances of ready-mixed concrete companies using river sand or crushed sand with high fine particle content. But the use of such low-quality fine aggregate is known to cause concrete quality to decline and have negative effects. So this study analyzed how much of an impact changes in fine particle content have on cement mortar's engineering characteristics. As a result, the flow rate and air quantity, which are characteristics of unhardened mortar, were shown to decrease as fine particle content increased, and compression strength, a characteristic of light mortar, was shown to subtly increase as fine particle content decreased.