• 한국석유지질학회:학술대회논문집
• /
• 한국석유지질학회 2005년도 제12차 학술발표회 초록집
• /
• pp.9-16
• /
• 2005

The electromagnetic (light) waves are limited to penetrate the media, ie, water and sea-bottom layers, due to high energy attenuation, but acoustic (sound) waves play as the good messenger to gather the underwater target information. Therefore the acoustic methods are applied to almost of ocean equipments and technology in terms of in-water and sub-bottom surveys, Generally the sound character is controlled by its frequency. In case that the sound source is low frequency, the penetration is high and the resolution is low. On the other hand, its character is reversed at the high frequency. The common character at the both of light and sound is the energy damping according to the travel distance increase.

• 한국컴퓨터그래픽스학회논문지
• /
• 제8권2호
• /
• pp.23-29
• /
• 2002

컴퓨터 그래픽스 분야에 있어서 하드웨어의 활용은 렌더링 속도를 높이고 높은 수준의 결과를 얻기 위한 중요한 요소이다. 최근의 급속한 하드웨어의 발달은 기존에 불가능했던 다양한 여러 가지 효과들을 가능하게 해 주었으며, 쉐이더 기능을 이용하여 고급의 렌더링 기법들을 실시간에 구현할 수 있게 되었다. 본 논문에서는 이러한 하드웨어를 이용하여 최대 4가지의 물질에 대한 직접 볼륨 렌더링(direct volume rendering)을 수행할 수 있는 기법을 제안한다. 이 기법에서는 다양한 물질에 대한 렌더링 기능 이외에 그라디언트 값에 의한 물질 표면의 강조 효과, 광원의 거리에 의한 빛의 감소효과(Light Attenuation)와 Depth cueing, 복수의 광원에 의한 조명 효과 등의 다양한 고급 렌더링 기법들을 볼륨 렌더링에 적용할 수 있다.

• 한국통신학회논문지
• /
• 제36권10B호
• /
• pp.1240-1245
• /
• 2011

본 논문에서는 실내 환경에서 LED(Light Emitting Diode)를 이용한 가시광 통신(VLC : Visible Light Communication) 채널의 특성을 모델링 및 분석하였다. LED에서 방사된 광 입자(Photon)의 일부는 직접(LOS : Line Of Sight) 또는 반사(NLOS : None Line Of Sight)의 경로를 거쳐서 PD(PhotoDiode)에 도달하며, 이것은 수신 부에서 시간 지연(delay profile)과 감쇠(attenuation)를 가진 다중 수신 신호 특성을 나타낸다. 가로, 세로, 높이의 크기가 20*8*2.3m로 가정된 실내 환경에서 2개의 LED와 3개의 PD를 사용하여, 각 PD에서 직접파, 반사파에 의한 채널 특성을 컴퓨터 모의실험하고 분석하였다. 채널 모델별 특성은 BPSK 기반의 통신 모의실험을 통하여 그 유용성을 입증하였다.

• Journal of Multimedia Information System
• /
• 제6권3호
• /
• pp.155-164
• /
• 2019

We intended to confirm that microwave attenuation by tree leaves is strongly linked to water content in leaves. We sampled natural broadleaves, including Japanese cinnamon, and investigated their effects on the microwave (3 to 20 GHz) frequency characteristics using a network analyzer. Experiments determined that microwave attenuation by foliage increases as a linear function of frequency per unit weight (gram). As the frequency increases, the spatial resolution increases, but the phase difference (imaginary component) increases. So we solved the dispersion of phase difference by sweeping the frequency and taking the intermediate value. Based on these experimental results, we developed a microwave scanner on 10Ghz to describe foliage moisture as a image and to enable assessments of leaf condition. Photosynthesis is the process whereby plants synthesize oxygen and sugars from carbon dioxide and water, thereby converting light energy into chemical energy. Since water is a major parameter of photosynthesis, the quantity of water accumulated inside a leaf reflects leaf health. The equipment described here and related microwave technologies will help assess the capacity of leaves to absorb atmospheric carbon dioxide.

• Advances in materials Research
• /
• 제12권3호
• /
• pp.211-226
• /
• 2023

The present work is considered to study the two-dimensional problem in an orthotropic magneto-thermoelastic media and examined the effect of thermal phase-lags and GN-theories on Rayleigh waves in the light of fractional order theory with combined effect of rotation and hall current. The boundary conditions are used to derive the secular equations of Rayleigh waves. The wave properties such as phase velocity, attenuation coefficient are computed numerically. The numerical simulated results are presented graphically to show the effect of phase-lags and GN-theories on the Rayleigh wave phase velocity, attenuation coefficient, stress components and temperature change. Some particular cases are also discussed in the present investigation.

• Tribology and Lubricants
• /
• 제17권6호
• /
• pp.482-489
• /
• 2001

Changes in light transmission characteristics caused by various types of oil contaminations were experimentally measured with a built-in type wear monitoring device. Three kinds of iron powders of different size distribution, carbon duct, two kinds of solutions and grease were used for the test contaminants in this work. Light intensity of the transmitted light was measured with the contamination level. Results showed that the transmitted light intensity decreased linearly with the contamination concentration in the oil and the slope was affected by the size distribution. Light attenuation was also caused greatly by carbon dust, water contamination and poly-meric fibers in terms of the light absorption. As a result, it was proved that the optical measurement device could be applicable effectively for detecting any significant change in lubricating oils.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.287-298
• /
• 2001

Change in light transmission characteristics caused by various types of oil contaminations was experimentally measured with a built-in type wear monitoring device. Three kinds of iron powders of different size distribution, carbon dust, two kinds of solutions and grease were used for the lest contaminants in this work. Light intensity of the transmitted light was treasured with the contamination level. Results showed that the transmitted light intensity decreased linearly with the contamination concentration in the oil and the slope was affected by the size distribution. Light attenuation was also caused greatly by carbon dust, water contamination and polymeric fibers mainly due to the light absorption. As a result, it was proved that the optical measurement device could be applicable effectively for detecting any significant change iii lubricating oils.

• 수산해양기술연구
• /
• 제22권2호
• /
• pp.16-21
• /
• 1986

Optical properties of sea water were studied in the entrance of Tokyo Bay, Japan. based on the data obtained from seven oceanographic stations in June. 1985. The observation of surface irradiance and underwater irradiance of sea water for eight kind of wavelength (378, 422, 481, 513, 570, 621, 653. 677nm) of sun light was conducted using the underwater irradiameter (Isigawa # SR-8). The mean att;enuation coefficient of the sea water was appeared to be 0.245 (0.042-0.776) and the attenuation co~fficient of the sea water for wavelength appeared such as 0.227 for 378 nm, 0.186 for 422 nm. O. 175 for 481 nm. O. 176 for 513 nm. O. 185 for 570 nm, 0.337 for 621 nm. O. 321 for 653 nm, O. 348 for 677 nm. The transparency was 7.0 m (5.5-9 m). water color was 10 (8.0-13.0) in the study area and the sun altitude was 60.95$^{\circ}$ (43.610-75.500). The relationship between attenuation coefficient (K) and transparency (D) was K = 2.63/ D (1.28/ D- 4. 87/D). The rate of light penetration for eight kind of wave Ie nth (378, 422. 481. 513. 570, 621, 653, 677 nm) were computed with reference to the surface light intensity respectively. The mean rate of light penetration in proportion to depths were 68.63% (46.02-86.07%) in 1 m layer, 18.40% (2.07 -48.48%) in 5m layer, 4.82% (0.042-22.30%) in 10m layer and 1.35% (0.01I-7.42%) in 20m layer. The rate of light penetration at the transparency layer with reference to the surface light intensity was shown as 10.39% (0.77-27.46%).

• 천문학회지
• /
• 제33권3호
• /
• pp.165-172
• /
• 2000

A baffle system for an airglow photometer, which will be on board the Korea Sounding Rocket-III(KSR-III), has been designed to suppress strong solar scattered lights from the atmosphere below the earth limb. Basic principles for designing a baffle system, such as determination of baffle dimensions, arrangement of vanes inside a baffle tube, and coating of surfaces, have been reviewed from the literature. By considering the constraints of the payload size of the KSR-III and the incident angle of solar light scattered from the earth limb, we first determined dimensions of a two-stage baffle tube for the airglow photometer. We then calculated positions and heights of vanes to prohibit diffusely reflected lights inside the baffle tube from entering into the photometer. In order to evaluate performance of the designed baffle system, we have developed a ray tracing program using a Monte Carlo method. The program computed attenuation factors of the baffle system on the order of $10^{-6}$ for angles larger than $10^{\circ}$, which satisfies the requirements of the KSR-III airglow experiment. We have also measured the attenuation factors for an engineering model of the baffle system with a simple collimating beam apparatus, and confirmed the attenuation factors up to about $10^{-4}$. Limitation of the apparatus does not allow to make more accurate measurements of the attenuation factors.

• 수산해양기술연구
• /
• 제21권2호
• /
• pp.105-111
• /
• 1985

일본 동경만 입구에서의 해수의 광학적 성질을 조사하기 위하여, 1985년 4월에 동경만 입구의 6개 관측점에서 투명도, 수색, 태양광도, 태양광의 8가지에 대한 해수의 표면조도 및 수중조도 등을 조사한 결과를 요약하면 다음과 같다. 1. 본 조사해역의 투명도는 7.2 m (6-9.5 m)였고, 수색은 9 (6.5-10.5)였다. 2. 해수의 평균소산계수는 0.300 (0.084-0.774)였고, 파장별로는 677nm가 0.498, 653nm가 0.402, 621nm가 0.378, 422nm가 0.258, 378nm가 0.230, 481nm가 0.226, 513nm가 0.213, 570nm가 0.195의 순으로 작게 나타났다. 3. 해수의 소산계수 K와 투명도 D와의 관계는 K=2.61/D였다. 4. 태양고도는 52.56$^{\circ}$(31.68-66.76$^{\circ}$)로 나타났다. 5. 태양광선의 표면광에 대한 해수투과율은 수심 1m 층에서 69.30% (57.33-77.40%), 5m 층에서 17.66% (6.3-27.90%), 10m 층에서 4.47%(0.6-9.17%), 20m 층에서 0.77% (0.02-22.99%)로 나타났다. 6. 투명도층에서의 태양광선의 표면광에 대한 해중투과율은 9.91% (0.51-22.99%)였고, 677nm (적)의 광이 2.61%로서 가장 적었으며 570nm(황녹)의 광이 17.57%로서 가장 많았다.