• The Korean Journal of Physiology and Pharmacology
• /
• 제21권2호
• /
• pp.189-195
• /
• 2017

This study aimed to compare the cellular toxicities of three clinically used dry eye treatments; 3% diquafosol tetrasodium and hyaluronic acid at 0.3 and 0.18%. A methyl thiazolyltetrazoiun (MTT)-based calorimetric assay was used to assess cellular proliferation and a lactate dehydrogenase (LDH) leakage assay to assess cytotoxicity, using Human corneal epithelial cells (HCECs) exposed to 3% diquafosol tetrasodium, 0.3% hyaluronic acid (HA), or 0.18% HA or 1, 6 or 24 h. Cellular morphology was evaluated by inverted phase-contrast light microscopy and electron microscopy, and wound widths were measured 24 h after confluent HCECs were scratched. Diquafosol had a significant, time-dependent, inhibitory effect on HCEC proliferation and cytotoxicity. HCECs treated with diquafosol detached more from the bottoms of dishes and damaged cells showed degenerative changes, such as, reduced numbers of microvilli, vacuole formation, and chromatin of the nuclear remnant condensed along the nuclear periphery. All significantly stimulated reepithelialization of HCECs scratched, which were less observed in diquafosol. Therefore, epithelial toxicity should be considered after long-term usage of diquafosol and in overdose cases, especially in dry eye patients with pre-existing punctated epithelial erosion.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.271-272
• /
• 2009

We fabricated a hybrid aligned film using reactive rod-like mesogen to reduce light leakage of twisted nematic(TN) cell in off-axis of the dark state. We proved that the fabricated compensation film has hybrid alignment by changing phase retardation according to polar angle. In this paper, we confirmed characteristics of compensation film through simulation results and found the matching factor of simulation results and experimental result. In result, the maximum pretilt angle of hybrid compensated film is $19^{\circ}$ which has phase retardation 0.1445.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.259-259
• /
• 2009

Surface contamination and leakage current have caused operating problems. A flashover in a substation may result in destruction of an insulator or many others electrical equipment. Engineering plastics have good characteristic (light weight, good productivity and little of void) as compare with epoxy or porcelain insulators. Outdoor insulator must have resistance to contamination. However, they are not suited to outdoor insulator by reason of being not good hydrophobic. RTV has a good property of hydrophobic and ATH has characteristic obstructing exothermic reaction. In order to reduce the incidence of insulator flashover and damage, the silicon rubber contained nano size ATH coat on surface of engineering plastics. In this paper, it compares resistance tracking of the engineering plastic coated RTV with that of non-coated engineering plastic and ATH filled composites performed much better than non-filled composites.

• 한국해양공학회지
• /
• 제23권3호
• /
• pp.30-34
• /
• 2009

Oil hydraulic piston pumps are being extensively used in the world, because of simple design, light weight and effective cost etc. An oil hydraulic pump is likely to have serious problems of high leakage, friction and low energy efficiency according to large time use. In the oil hydraulic piston pumps the clearance between the valve block and piston plays an important role for volumetric and overall efficiency. In this paper, the wear property of the SACM645 material used the hydraulic piston pump has been work out by experimentation with variable heat treatment. To investigate the effect according to the piston surface condition, seven different types specimen were prepared. From the wear test results, induction hardening and nitration were definitely superior to the others. On the whole, nitration was estimated for high strength material to wear resistance.

• 대한기계학회논문집A
• /
• 제33권6호
• /
• pp.584-589
• /
• 2009

As the automobile energy efficiency stands out an important matter of interest, the magnetic engine valve system receives attention. It has an advantage of no engine power leakage in opening and closing the valve. Moreover, it generates much bigger force than the piezo actuator system, so it can be a good alternative system of the cam and camshaft system. However, since the valve system is not light enough, it is necessary to make its weight reduce. In this study, topology optimization is applied to find the optimal shape of the armature in a magnetic valve system combined with the finite element analysis for the magnetic field analysis. The result is used to obtain a concept design. The adjoint variable method is employed in order to calculate the design sensitivity of the magnetic driving force in the armature component mostly to reduce the computational time during the repeated sensitivity calculation. The sequential linear programming is employed for the optimization algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1449_1450
• /
• 2009

Surface contamination and leakage current have caused operating problems. A flashover in a substation may result in destruction of an insulator or many others electrical equipment. Engineering plastics have good characteristic (light weight, good productivity and little of void) as compare with epoxy or porcelain insulators. Outdoor insulator must have resistance to contamination. However, they are not suited to outdoor insulator by reason of being not good hydrophobic. RTV has a good property of hydrophobic and ATH has characteristic obstructing exothermic reaction. In order to reduce the incidence of insulator flashover and damage, the silicon rubber contained nano size ATH coat on surface of engineering plastics. In this paper, it compares resistance tracking of the engineering plastic coated RTV with that of non-coated engineering plastic and ATH filled composites performed much better than non-filled composites.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.293-297
• /
• 2009

극저온 가압제를 사용하는 가압시스템에서 가압제의 공급을 차단하기 위하여 많이 사용되고 있는 밸브로는 공압구동밸브나 솔레노이드밸브, 파이로밸브 등이 있다. 공압구동밸브와 솔레노이드밸브는 파이로밸브에 비하여 구조가 복잡하고 무게가 무거운 단점이 있어, 본 연구에서는 극저온 및 고압에 적용이 가능하고 구조가 비교적 간단하고 무게가 가벼운 극저온 헬륨가스용 파이로밸브를 개발하여 내압 및 기밀시험과 진동시험, 극저온 공급시험을 수행하였다.

• 한국전기전자재료학회논문지
• /
• 제17권8호
• /
• pp.871-874
• /
• 2004

In recent, it is said that the trend of LCD is direction to pursue high qualities like as high transmittance, high contrast ratio, wide viewing angle, fast response time, and so on. Especially, it is known that these qualities are essential to large size LCD like as LCD TV and we can realize them through to uniform cell gap and deep black state. Until now, the ball spacer has been used to control of uniform cell gap. However, the existence of ball spacer inside the cell causes the deformation of the liquid crystal molecules and damage to alignment layer. Such a deformation of the liquid crystal causes light-leakage in the dark state, which lowers contrast ratio of the display. Nowadays, this problem has been solved by using Patterned Spacer on Color Filter. but Side Effect just as gravity mura has been induced. In this paper, we studied the mechanism on gravity mura in case of using patterned spacer on color filter.

• 한국환경복원기술학회지
• /
• 제16권1호
• /
• pp.83-97
• /
• 2013

This study was carried out to suggest an experimental base in selecting the drought resistance of plants. Adopting the natural drought method, this paper studies the drought resistance of 12 kinds of ground cover plants. focusing on analyzing the changes of relative water content on leaf, relative electric conductivity and chlorophyll content in 12 kinds of plants, and and the relation between soil water content under drought stress. The drought resistance of the plants were subject to laboratory and rooftop drought resistance treatments. The Logistic model of nonlinear regression analysis was used to evaluate the lethal time that were predicted with the range of 10.4~30.1d on roof top, and 19.5~39.0d on hothouse. The result shows that with the increase of stress time, relative water content and chlorophyll content on leaf were in a downward trend; the relative electric conductivity was upward tendency. Among 12 species of ground cover plants, exclude Pulsatilla koreana, Ainsliaea acerifolia were selected for rooftop plants because they showed resist drought strongly and took adaptive ability.

• 대한방사선기술학회지:방사선기술과학
• /
• 제8권2호
• /
• pp.11-14
• /
• 1985

The author came to analize and get the following problems after researched radiographic quality in order to find out the necessary factors to improve in radiographs of frontal projection of the chest selected at random of the adult patients (1545 male, 1520 female) who had been examined in 4 departments of radiology of the general hospitals in Seoul and Kyungki area. 1. Problems of x-ray film or of radiographic cassette appeared in 2.97% radiographs on account of selection of the film size (except costophrenic sinus) (1.79%), poor screen-film contact (0.85%), light leakage of cassette (0,33%). 2. Problems of patients' positioning or breathing appeared in 16.57% radiographs of all because of overlapping of lung apex and clavicle (6.98%), overlapping of scapula and lung field (5.87%), asymmetrical projection of clavicles (1.76%), errors in positioning and breathing of the patient (1.96%). 3. Problems of x-ray exposure factors or film processing appeared in 22.25% radiographs because of over-density (2.64%), under-density (3.95%), fog (0.59%), demonstration density under clavicles or lung marking unsharply (3.82%), not clear of lung marking from breast region (0.94%), not clear the lung marking from the part overlapped of heart and lungs (3.92%), not clear the lung marking from the part overlapped of liver and lung (6.49%).