• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.162-163
• /
• 2013

A temporary work are lifting equipment that tower crane or lift, and temporary architectures that office building and storage in construction site. And it is main construction work that built and used temporarily like to a scaffolding, a walk plate, and a formwork. This study is to adjust breakdown structure of temporary work to introduce technical tendency. With a site manager, it is collected a detailed statement and compared. As a result to break down a tendency that temporary equipment, additional function, and direct work of temporary technique, first, existing detail technical indexes that group I, group J, group K, and group L are classified. Second, due to set up and manage to main agents in case of existing detail technical indexes that B1, B2, it is not wrong to classify. But, it is somewhat different, and therefore adjust it to same level. Finally, as a technical tendency that temporary equipment, additional function, and direct work of temporary technique, it is adjusted the others.

• Journal of Korea Multimedia Society
• /
• v.15 no.1
• /
• pp.81-86
• /
• 2012

This paper presents a VLSI design for lifting-based discrete wavelet transform (DWT) 9/7 filter using multiplierless multiple constant multiplication (MCM) architecture. This proposed design is based on the lifting scheme using pattern search for folded architecture. Shift-add operation is adopted to optimize the multiplication process. The conventional serial operations of the lifting data flow can be optimized into parallel ones by employing paralleling and pipelining techniques. This optimized design has simple hardware architecture and requires less computation without performance degradation. Furthermore, hardware utilization reaches 100%, and the number of registers required is significantly reduced. To compare our work with previous methods, we implemented the architecture using Verilog HDL. We also executed simulation based on the logic synthesis using $0.18{\mu}m$ CMOS standard cells. The proposed architecture shows hardware reduction of up to 60.1% and 44.1% respectively at 200 MHz clock compared to previous works. This implementation results indicate that the proposed design performs efficiently in hardware cost, area, and power consumption.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.83-88
• /
• 2009

The objective of this paper was to evaluate the effectiveness of horizontal, vertical, asymmetric and coupling multipliers for manual material handling. Lifting tasks with 5 different horizontal distances ($30{\sim}70cm$) for 6 vertical distances(ankle, knee, waist, elbow, shoulder and head height) were experimented. The muscle activity and muscle exertion level during asymmetric load handling(without trunk flexion) was experimented. Lifting tasks with and without handle tote box for three postures(straight, bending, right angle posture) were experimented. The degrading tendency did not appeared almost in $60{\sim}70cm$ interval's horizontal distance. As a result of ANOVA, MVC paid attention to horizontal and vertical distance but cross effect was insignificant(p<0.01). The change of the MVC according to the horizontal, vertical distance appeared similar from of RWL. The results of normalized MVC measurement were decreased about 16%, 24%, 34% respectively as the asymmetry angle was $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. RMS EMG values of right erector spinae muscles were decreased as the work posture went to $90^{\circ}$ and those of left erector spinae muscles were increased until the asymmetry angle was $40^{\circ}$ but decreased continually over $40^{\circ}$. 7 subjects, activities of left and right latissimus dorsi muscles were maintained constantly, while for remainer, those were irregular. MVC reduced maximum 23% by type of handle. MVC was highest in straight posture, but was lowest in right angle posture. As a result of ANOVA, MVC paid attention to posture, coupling(p<0.01). To all handle types, biceps brachii activity was increased in right angle posture, but reduced in straight posture. Based on the results of this study, it is suggested that the NIOSH guideline should not be directly applied to Korean without reasonable reexamination. In addition, we need to afterward study through an age classification.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.121-127
• /
• 2006

Nursing often requires heavy physical work activities such as lifting heavy loads, working in awkward postures, transferring patients, operating hazardous equipment, etc. Among various nursing tasks, patients transferring is one of the most physically demanding tasks. This study aims to investigate workload of the patients transferring, and to propose its improving methods for reducing high workload. The results showed that irrespective of methods for patients transferring and the number of workers involved, workload for most patients transferring tasks exceeded the action limit represented in terms of L5/SI compressive force of 3,400N or LI of 1.0 by NIOSH. The loads for some tasks were far larger than the maximum permissible limit of 6,400N. It is recommended that the mechanical devices for transferring patients such as ceiling crane, sling lift etc. should be introduced rather than simply increasing the number of workers in the tasks.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.113-114
• /
• 2016

This paper proposes a technical requirements analysis of implementation of multi-trade prefabrication. Recently, there has been a rise in the use of prefabrication to minimize on-site work for time reduction to increase productivity. Prefabrication technique is evolved into multi-trade prefabrication combining other trades from single-trade prefabrication. For implementation of new technique, not only itself but complementary techniques have to be prepared. In this paper, MEP corridor rack, a major item of multi-trade prefabrication, was implemented in the test bed and its process was analyzed to find out technical requirements. As a result, comparatively high level of IT technique was required for efficient use of multi-trade prefabrication in design, lifting and construction phase. In design phase, component level of BIM library was needed for manufacturing; and in lifting phase, BIM-based site logistics process was required. Also in construction phase, laser scanning was implemented for gathering shape and geometry of the wall and slab that were attached to multi-trade prefabrication module.

• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.117-120
• /
• 2001

Low back pain has been known as the most frequent musuculoskeletal disorders in modern industrial society and cost by low back pain is increasing mon and more. The asymmetric lifting has been identified as a major risk factor of low back pain. In this study, the muscle activity and muscle exertion level during asymmetric load handling (without trunk flexion) was estimated. The results of normalized MVC measurement were decreased about 16％, 24％, 34％ respectively as the asymmetric angle was $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. From the results of EMG measurement contralateral muscles were more active than ipsilateral muscles. RMSEMG values of right erector spinae muscles were decreased as the work posture went to 90$^{\circ}$ and those of left erector spinae muscles were increased until the asymmetric angle was 40$^{\circ}$ but decreased continually over 40$^{\circ}$. And for seven of subjects, activities of left and right latissimus dorsi muscles were maintained constantly, while for remainer, those were irregular.

• Safety and Health at Work
• /
• v.8 no.4
• /
• pp.356-363
• /
• 2017

Background: The aim of this study was to investigate which physical and psychosocial work demands were associated with excellent work ability in individuals with neck pain, and to investigate age and sex differences in these associations. Methods: The study sample was obtained from the Statistics Sweden cross-sectional Work Environment survey and consisted of workers who reported neck pain after work (N = 3,212). Results: The findings showed an association between excellent work ability and self-reported low exposure to lifting, twisted work posture, working with hands in shoulder level or higher, and leaning forward without support and combination of exposures containing these work demands. Low exposure to seated work and high demands showed a reversed association. The associations were present mainly among older workers and were generally stronger for men than for women. Conclusion: This study indicates that a lower level of physically demanding work is an important element to maintain excellent work ability, especially for the older worker with neck pain.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.4
• /
• pp.48-59
• /
• 2012

Gangform, compared to the traditional forms, is a systemized form which can reduce construction duration and cost by the advantage of using it repeatedly. However, transportation and climbing process of the Gangform is highly dependant on the performance of tower crane. Gangform climbing process takes one day out of six to seven days of a structural work cycle. Tower cranes can not be used in other lifting works when they lift the Gangform during the structural work cycle, causing the delay in the construction project. Numerous efforts and researches have been done in domestic and international industry to solve such limitations of Gangform climbing process. Especially, "A Study on the Development of Automatic Gangform Climbing System for Apartment Housing Construction"has suggested a conceptual model which can climb the Gangform system without a tower crane. In this paper, the technical and economical feasibilities of previously proposed Automatic Gangform climbing system are examined by evaluating its structural stability and lifting load reduction effect.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.3
• /
• pp.139-146
• /
• 2010

Recent studies suggest that prolonged standing at work is associated with varicose veins (VV). The objective of this study was to analyze the differences of VV risk in terms of work types in casino dealers and hotel service workers. Symptoms of VV were evaluated using a self-reported questionnaire from 2,092 participants, and muscle fatigue in the lower legs were evaluated using surface electromyography. The shift rate of median frequency in Gastrocnemius was -30.0% among the casino dealers working in prolonged static standing posture, and - 14.3% among the casino dealers sitting during working time. After adjusting age, gender, smoking, and family history of VV, the risk ratio of VV was 3.67(95% CI 2.03-6.59) in group I (prolonged standing and occasional walking at work), 6.29(95% CI 3.48-11.35) in group II (prolonged standing, occasional walking and heavy lifting at work), and 8.07(95% CI 4.51-14.43) in groupIII(prolonged static standing at work). In conclusion, prolonged standing at work may be a work related risk factor of VV.

• The Journal of Korean Medicine
• /
• v.33 no.1
• /
• pp.136-147
• /
• 2012

Objectives: The purpose of this study was to evaluate work-related risk factors of musculoskeletal disorders (MSDs) in various departments and tasks at an oriental medicine hospital. Methods: 269 hospital workers were selected for the study. The questionnaire survey included general characteristics, work-related characteristics and MSDs. Cross-tabulation analysis, multiple logistic regression, adjusted for age, work time, job demand and workload, were used to evaluate the effects of work-related factors on MSDs. Results: There were differences in MSDs depending on gender, age, occupation, and work-related factors. Prevalence rates of MSDs were 23.79% shoulder, 14.13% back, 10.41% neck. Risk factors for MSDs was packaging of drugs, transfer, and exercise therapy of physical therapist. Shoulder pain was significantly influenced by using power tools, over-reaching, and job demand while back pain was significantly influenced by weight-lifting operations and keyboard typing. Conclusions: The results of this study suggest that consideration of MSDs characteristics of workers in oriental medicine hospital is necessary to change unsuitable work environments and educate on preventing MSDs.